HOW TO Setup a 5.2.4 HOME THEATER Surround Sound Speaker System | Klipsch Reference Premiere II

HOW TO Setup a 5.2.4 HOME THEATER Surround Sound Speaker System | Klipsch Reference Premiere II
Shop Klipsch Speakers - bit.ly/Klipsch_Speakers.
TONS of Resources and links to all products below ⬇️⬇️⬇️
This video is sponsored by Klipsch & Pioneer
Channel Sponsor: Arendal Sound - bit.ly/Arendal_Sound
Arendal 1723 Speakers - bit.ly/Arendal_1723_Series
Arendal 1761 Speakers - bit.ly/Arendal_1961_Series
Arendal Subwoofers - bit.ly/Arendal_Subwoofers
Klipsch Speakers:
RF-7 III - bit.ly/Klipsch_RF-7_III
RP-8000FA II - bit.ly/Klipsch_RP-8000F_II
RP-8060FA II - bit.ly/Klipsch_RP-8060FA-II
RP-504C II - bit.ly/Klipsch_504C-II
RP-600M II - bit.ly/Klipsch_RP-600M-II
RP-500SA II - bit.ly/Klipsch_500SA-II
SPL-120 - amzn.to/3XtF1Hu
Electronics:
Pioneer VSX-LX505 - bit.ly/Pioneer_VSX-LX505
Hisense 85U7H - amzn.to/3mxkcgx
AppleTV 4K - amzn.to/43YnDOu
Nvidia Shield Pro - amzn.to/41RFOUs
Panasonic DP-UB420 4K Player - amzn.to/43SHT49
Panasonic DP-UB820 4K Player - amzn.to/43SHT49
Panasonic DP-UB9000 4K Player - amzn.to/3H2NAD2
Sewell Banana Plugs & Accessories:
Banana plugs are a MUST in my home theater and 2ch setup.
Use the affiliate links below to save 5% on your order (automatically added during checkout)
Visit Sewell - bit.ly/sewell_direct
Not All Banana Plugs Are the Same - How to Install Them to Speaker Wire
Sewell Banana Plugs - bit.ly/sewell_banana_plugs
Sewell Speaker Wire - bit.ly/sewell_speaker_wire
Sewell Ghost Wire - bit.ly/sewell_ghost_wire
Sewell HDMI Cables - bit.ly/sewell_hdmi_cables
Sewell XLR Cables - bit.ly/sewell_xlr_cables
Sewell Speaker Mounts & Accessories - bit.ly/sewell_speaker_mounts_...
More Cables:
Monoprice HDMI Cables - amzn.to/41Li6Je
Monoprice 14 gauge Speaker Cables - amzn.to/3AoX0EU
Monoprice Subwoofer Cable - amzn.to/43ZHMUK
Unvert Toggle Bolts - amzn.to/3N3a62b
Toggle Bolts - amzn.to/43YonDi
Wire Strippers - amzn.to/3owiSvr
AVR Sub Out Y Splitter - amzn.to/3ozoNQC
Subwoofer Y Adapter - amzn.to/3AmmDpX
TV's & Accessories:
Monoprice TV Mounts - amzn.to/40r4r9i
Kanto TV Mounts - amzn.to/40xNXw0
Power and Low Voltage Cable Management Kit - amzn.to/3FAvnLk
Audio Advice Article on Biamping - bit.ly/Audio_Advice_Biamping
Recommended Videos:
Klipsch Reference Premiere II Review - • TURN IT UP! | Klipsch ...
Klipsch Reference Premiere II Overview - • Klipsch Reference Prem...
How to Install an AVR - • How to Connect An AV R...
Setup Audyssey • Audyssey MultEQ XT32 S... -
Setup Dirac Live - • Pioneer VSX-LX505 with...
Level Match Your Speakers - • Get A More IMMERSIVE E...
Improve Center Channel - • MAXIMIZE the Sound Fro...
Hisense U7H Review - • Hisense is CHANGING th...
Klipsch Reference Premiere Subwoofers - • Klipsch Isn't Playing!...
Weekly and monthly Zooms on Patreon - / youthman
MWAVE 2023 Tickets and Info - midwestavexperience.com/
Best pricing on Home Theater products - youthmanreviews.com/sales/
FREE Home Theater Design Tool - bit.ly/Home-Theater-Design-Tool
Submit your Home Theater - hometheatertours.com.
Ways You Can Support:
Patreon: / youthman
Youthman Courses - www.youthmancourses.com/
Youthman Merch - teespring.com/stores/youthman/
Donation via Venmo @Youthman
Follow Us:
KZbin: Subscribe to this Channel: goo.gl/YEJ23p
Youthman Crew Facebook Group - / youthmancrew
Instagram: / youthmanreviews
Twitter: / youthmanreviews
Website: youthmanreviews.com/
____
Disclaimer: Affiliate Links are used in the description of this video. I earn from qualifying purchases.
Valencia Bespoke Series Theater Seats:
Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultim...
Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate...
Naples - bit.ly/Valencia_Naples
Valencia Cinema Series Theater Seats:
Venice - bit.ly/valencia_venice
Budapest - bit.ly/valencia_budapest
Piacenza - bit.ly/valencia_piacenza
Piacenza Powered Headrest - bit.ly/valencia_piacenza_powe...
Verona - bit.ly/valencia_verona
Verona - Powered Headrest - bit.ly/valencia_verona
Valencia Premier Series Theater Seats:
Oslo - bit.ly/valenciaoslo
Oslo XL - bit.ly/valenciaosloxl
Zurich - bit.ly/valenciazurich
Tuscany - bit.ly/valencia_tuscany
Bern - bit.ly/valencia_bern
All Valencia Seating - bit.ly/valencia_all
#klipsch #dolbyatmos #surroundsound

[@Youthman]

Home Theater Dolby Atmos 5.2.4 Setup | Klipsch Reference Premiere II Shop Klipsch Speakers - bit.ly/Klipsch_Speakers. TONS of Resources and links to all products below ⬇⬇⬇ This video is sponsored by Klipsch & Pioneer Klipsch Speakers: RF-7 III - bit.ly/Klipsch_RF-7_III RP-8000FA II - bit.ly/Klipsch_RP-8000F_II RP-8060FA II - bit.ly/Klipsch_RP-8060FA-II RP-504C II - bit.ly/Klipsch_504C-II RP-600M II - bit.ly/Klipsch_RP-600M-II RP-500SA II - bit.ly/Klipsch_500SA-II SPL-120 - amzn.to/3XtF1Hu Electronics: Pioneer VSX-LX505 - bit.ly/Pioneer_VSX-LX505 Hisense 85U7H - amzn.to/3mxkcgx AppleTV 4K - amzn.to/43YnDOu Nvidia Shield Pro - amzn.to/41RFOUs Panasonic DP-UB420 4K Player - amzn.to/43SHT49 Panasonic DP-UB820 4K Player - amzn.to/43SHT49 Panasonic DP-UB9000 4K Player - amzn.to/3H2NAD2 Sewell Banana Plugs & Accessories: Banana plugs are a MUST in my home theater and 2ch setup. Use the affiliate links below to save 5% on your order (automatically added during checkout) Visit Sewell - bit.ly/sewell_direct Not All Banana Plugs Are the Same - How to Install Them to Speaker Wire Sewell Banana Plugs - bit.ly/sewell_banana_plugs Sewell Speaker Wire - bit.ly/sewell_speaker_wire Sewell Ghost Wire - bit.ly/sewell_ghost_wire Sewell HDMI Cables - bit.ly/sewell_hdmi_cables Sewell XLR Cables - bit.ly/sewell_xlr_cables Sewell Speaker Mounts & Accessories - bit.ly/sewell_speaker_mounts_and_accessories Monoprice HDMI Cables - amzn.to/41Li6Je Monoprice 14 gauge Speaker Cables - amzn.to/3AoX0EU Monoprice Subwoofer Cable - amzn.to/43ZHMUK Unvert Toggle Bolts - amzn.to/3N3a62b Toggle Bolts - amzn.to/43YonDi Wire Strippers - amzn.to/3owiSvr AVR Sub Out Y Splitter - amzn.to/3ozoNQC Subwoofer Y Adapter - amzn.to/3AmmDpX TV's & Accessories: Monoprice TV Mounts - amzn.to/40r4r9i Kanto TV Mounts - amzn.to/40xNXw0 Power and Low Voltage Cable Management Kit - amzn.to/3FAvnLk Audio Advice Article on Biamping - bit.ly/Audio_Advice_Biamping Recommended Videos: Klipsch Reference Premiere II Review - kzbin.info/www/bejne/g5aucpWGfK51ack Klipsch Reference Premiere II Overview - kzbin.info/www/bejne/mXqng3-Odp1sn6s How to Install an AVR - kzbin.info/www/bejne/i32oYpqaaquqrqs Setup Audyssey kzbin.info/www/bejne/bIuTpKmwjrh0e69h Setup Dirac Live - kzbin.info/www/bejne/r6TTfqitlLWLZtU Level Match Your Speakers - kzbin.info/www/bejne/jGWbYotoh62ImaM Improve Center Channel - kzbin.info/www/bejne/aGXGaIOhhKxkrKc Hisense U7H Review - kzbin.info/www/bejne/ZoSvlWN3m61qp8U Klipsch Reference Premiere Subwoofers - kzbin.info/www/bejne/eWKrc2yBiJebbLM Weekly and monthly Zooms on Patreon - www.patreon.com/youthman MWAVE 2023 Tickets and Info - midwestavexperience.com/ Best pricing on Home Theater products - youthmanreviews.com/sales/ FREE Home Theater Design Tool - bit.ly/Home-Theater-Design-Tool Submit your Home Theater - hometheatertours.com. Ways You Can Support: Patreon: www.patreon.com/youthman Youthman Courses - www.youthmancourses.com/ Youthman Merch - teespring.com/stores/youthman/ Donation via Venmo @Youthman Follow Us: KZbin: Subscribe to this Channel: goo.gl/YEJ23p Youthman Crew Facebook Group - facebook.com/groups/youthmancrew Instagram: instagram.com/youthmanreviews/ Twitter: twitter.com/youthmanreviews/ Website: youthmanreviews.com/ ____ Disclaimer: Affiliate Links are used in the description of this video. I earn from qualifying purchases. Valencia Bespoke Series Theater Seats: Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultimate-luxury Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate-luxury Naples - bit.ly/Valencia_Naples Valencia Cinema Series Theater Seats: Venice - bit.ly/valencia_venice Budapest - bit.ly/valencia_budapest Piacenza - bit.ly/valencia_piacenza Piacenza Powered Headrest - bit.ly/valencia_piacenza_powered_headrest Verona - bit.ly/valencia_verona Verona - Powered Headrest - bit.ly/valencia_verona Valencia Premier Series Theater Seats: Oslo - bit.ly/valenciaoslo Oslo XL - bit.ly/valenciaosloxl Zurich - bit.ly/valenciazurich Tuscany - bit.ly/valencia_tuscany Bern - bit.ly/valencia_bern All Valencia Seating - bit.ly/valencia_all #klipsch #dolbyatmos #surroundsound

[@justinbeamon6624]

I love how even with an insane full JTR theater you still think about the basics and share down to earth videos like this for us without a dedicated theater! Fantastic explanation of everything!

[@Youthman]

Thank you kindly Justin. That’s the entire purpose for my channel regardless of how far My Home Theater progresses, I still want to share a variety of content from basics to intermediate to advanced as well as budget to ultra high end systems and gear. A little something for everyone.

[@jorgejovel5313]

Hey those are klipsch line I have except for the dolby atmoss . I run height speakers instead in a 20x 22 garage room with dual sb4000 s . I'm saving money for the sb 16 ultra as my third sub. But first gotta finish paying off my jvc 4k projector 2 more payments. 😅

[@keepingupwiththejones2933]

This was such a thoughtful comment. Thanks for being you.

[@Youthman]

Thanks brother

[@o.c.g.m9426]

Another pro-tip, if you have white baseboard or black or beige you can purchase wire hiders(in that color) & put your wires along the edge & floor of your walls. I also have hardwood floors

[@ZepG]

Thanks Youthman, I just subscribed! I just had my old Sony STR-KS2300 blow up on me and I've been doing exhaustive research for three days straight. I ordered a Pioneer VSX935 receiver ($422) and a Klipsch R-120SWi Subwoofer ($250). I'm planning on setting up a 5.1.2 Atmos setup using the old Sony speakers with two old Pioneers as my height speakers temporarily. If you can comment on any mistakes it would be appreciated. Your video was the most comprehensive video I've watched in the last three days, and with me being an audio/video newbie I just wanted to thank you.

[@xxCross2]

Such a great video, thanks for going over what i believe to be the basics, thank yoy!

[@sawyerramos3113]

I am so excited to take this on. Your videos are awesome! thank you for your time.

[@brummet85]

I'm super new at home audio and I just learned a ton! Thank you @Youthman

[@adnanm9958]

Amazing explanation, thank you so much 😊

[@mikeblack3657]

Thanks for the simple and effective tip! Respect to you Youthman.

[@Youthman]

Glad you found the video helpful!

[@alfredomiliannodarse5460]

Saludos amigo. Como no soy muy bueno en el idioma inglés utilizo la traducción automática de KZbin para seguirle. .Esta es la explicación mas completa, detallada, pausada e inteligible que he visto hasta ahora al respecto, su experiencia nos aporta una invaluable ayuda. Muchas gracias por tan meritorio esfuerzo.

[@jonqn07]

Wow. So much information. Thank you for all your tips. I sure will follow you to learn more. THANK YOU!

[@Youthman]

You’re more than welcome Jon. I’m glad you found a video helpful and thanks for subscribing.

[@Nutswoodworking]

Top of the line info here. Thanks man

[@DucNguyen-gl9dr]

Amazing Video Michael. Thank you so much. Always learning from you.

[@Youthman]

Thank you Duc

[@MrNathan07]

This would be the perfect setup for my living room if I had the money to one day do somethin like this. I just have a LG 65" UQ9000 LCD TV & a LG 3.1 soundbar which does the job pretty good for now, but man if I could one day take it to the next level this is exactly what I'd do for sure. I love the setup man, thanks for the info on this stuff too.

[@jayl8547]

This is great info. I caught a few tips that I did not know. Thanks brother!

[@Youthman]

Glad you found the video helpful Jay

[@SuperSteamengine]

today i have decided to keep my subs placing opposite corners in the room and thinking about the phase allignment. and what are the odds? youthman explained the point clear & crisp. thanks mate and loved your video. stay blessd

[@garryhammond3117]

Thanks Michel - This was one of your best vids! - Chers!

[@Youthman]

Thank you, Garry. That was the goal. I put a ton of time, probably more so than almost any other video on the channel. The main reason is my highest viewed video on the channel is similar in nature, but it was made for years ago with horrible lighting, horrible, audio, and terrible looking camera lol I really wanted to replace that video was something I could be proud of. Hahaha

[@welderfixer]

Pro quality instructional video from a pro quality guy! Thanks Mr. Stevens!

[@Youthman]

Thank you Kevin.

[@Pienimusta]

Helpful video even if you are making your first 2.0 system.

[@sabbathAndy]

Awesome instructions brother keep it up!

[@Youthman]

Thank you Andreas

[@simplytechtured]

New subscriber here! Thoroughly enjoying your videos so far as I’m planning on revamping my system!

[@Youthman]

Thank you for the kind words. Welcome to the community and thanks for subscribing. I have 750+ videos for you to enjoy.

[@simplytechtured]

@@Youthman That’s the plan, is to go through them and see what fits my needs. Coming from a HTIB, to now a Denon S760H, and R450C, R41’s and RP500M’s. Definitely gonna order banana plugs lol

[@joshcara5345]

Thanks for this good info here!

[@Youthman]

I’m glad you found the video helpful Josh.

[@salomongarcia5572]

Thank you for all the information! I have a question to you, can you connect it to a 7.2 receiver?

[@charlesscioli5268]

Great video as always Mike!

[@Youthman]

Thank you Charles

[@Zachary_Setzer]

Congrats on getting the video edited and published. Sounds like you put a lot into this one!

[@Youthman]

Thank you Zachary. This video took me 3 days to film and edit. Most videos take 1 day.

[@TheLkdude]

@Youthman, Nice, good pace and coverage , I believe adding the Dirac Live optimization with more than three-point measurement version could be worth while as well.

[@Youthman]

100%. This was just for the video to show the process, not an actual calibration.

[@darcenex14]

Thanks for this video. Very helpful. Some movie mixes have dialogue set much lower than others. It is pretty frustrating having to always play with the center channel to get good matching levels for dialogue.

[@Youthman]

Glad you found the video helpful

[@hassandchassan]

TENET 😄

[@keepingupwiththejones2933]

Sorry I missed the premiere. My daughter had soccer. You definitely did Klipsch justice. You can still feel the respect, admiration and love that you have for Klipsch ❤❤

[@Youthman]

It’s ok, it wasn’t a premiere. Just standard upload

[@AdriDwitomo]

I thinknim ready to move into a proper hifi home theather setup from my all in one soundbar setup..wish me luck!

[@Youthman]

You’ve got this! Enjoy the Journey!

[@michaelwyckoff7593]

Looks awesome Michael

[@Youthman]

Thank you, Michael

[@voiceofreason9238]

I've got a buddy building a new house. This is the exact system I'm recommending for his living room setup. He's older and the priority for him is clarity of voices while watching TV. I saw your previous video on Tips to Enhance the Dialogue of the Center Channel. I found it extremely helpful, everybody should watch that one.

[@Youthman]

Thank you kindly. This would definitely be a killer setup. As we get older, the high frequencies in our hearing begin to diminish. Klipsch provides very detailed top end, which can definitely help. If he does purchase a system, I would be grateful if he is able to use the affiliate links in the description.

[@voiceofreason9238]

@@Youthman Will do, my friend. Thanks for the reminder that the link is in the description.

[@Youthman]

Appreciate it brother. Someone ordered $8,600 worth of gear today using my link (which was super cool).

[@MiltonCorDibujaryCrear]

Hello. Thank you very much for your videos Do you think Pioneer amplifiers are good? Compared to Denon or Yamaha for example? Thank you so much

[@ryansangalang343]

Love the setup and video.

[@Youthman]

Thank you, Ryan

[@skoetie1088]

Now this is a good video thank you youthman

[@Youthman]

Glad you enjoyed it

[@jeffleonard343]

hahaha LOVE the Screen Pitch guy! Great video man!

[@Youthman]

Ryan’s channel is awesome

[@dannyr2272]

This was a great and helpful vid 🍿

[@Youthman]

Thank you very much Danny

[@steverosales2616]

Nice video, great editing 👍👏

[@Youthman]

Thank you so much, Steve. This was certainly a fun one to edit.

[@sawyerramos3113]

HOLD IT!!! You in FL? Say you are in Tampa, PLEASE! I am getting ready to upgrade my set up to this exact same set up!

[@Youthman]

I’m in Plant City

[@randelldavis578]

Hey Michael, I have a question about the Klipsch RP 500sa which I have. In this video I noticed that you said that if you use them for on wall Atmos that you would set the toggle switch to surround and on an older video you said to set it to Atmos. Mine are set to Atmos but do I need to set it to surround to get the best result, I have 4 of them on wall as Atmos/heights. Thanks

[@kazichhetri1586]

Hi, Youthman; that is an excellent explanation of a setup. I enjoy your videos. Can you please provide a complete setup for Klipsch reference 625 speakers with an Onkyo 6100 receiver? I would appreciate your prompt insight. Thank you!

[@Youthman]

Thank you for the kind words. Unfortunately I do not have any Onkyo AVR’s, nor the 625 speakers.

[@michaelburton5198]

Hey Believe It Or Not, When You Guys Do This, Hey I Learn Something Everytime, Yet Still! I LOVE ❤️ THIS LOL.. BIG TIME!😊

[@Youthman]

Thank you for the kind words Michael

[@wendellwendellb339]

Thank you, finally you have answered the question I had about the phase for subs in the front and rear (I had asked this question sometime last year, and couldn’t get an answer) my solution was to just make the change of the rear subs to 180. I put it a demo disc (GKOTM) and I got my answer, the subs came alive! Thank you Michael!!

[@Youthman]

I appreciate the kind words Wendell. Glad you got it figured out.

[@Dooguy]

could u please elaborate. Im a newbie and running a marantz avr with two subs. Im mostly a music guy so suffering on the tv movie end doesnt bother me. could u explain the 180 comment. and how u made one sub different than the other? or did i mis read...thanks

[@Youthman]

Typically on the rear of your sub, you will see a phase knob or switch. Sometimes it’s a toggle switch to choose 0 degrees or 180 degrees. Others have a variable knob that allows you to choose anywhere between 0 and 180 degrees.

[@wendellwendellb339]

@@Dooguy Are your 2 subs in the front, or do you have 1 in the front, and the other in the rear?

[@Dooguy]

@@wendellwendellb339 room is 24 x 36 lg sub in front...smaller rear. both svs subs

[@ghiepaghubasan7200]

thank you for sharing your vdeo❤

[@daveedmonds655]

I have a dedicated room with all Klipsch. After researching the new Nakamichi Dragon, I'm wondering if that's the way to go. Have you heard it? If so, what are your thoughts?

[@Easy_Victor]

What are those speaker cables covered with a material? beautiful.

[@gregrichard9192]

Great video 👍

[@Youthman]

Thanks Greg

[@tfk40]

Well done, very informative and explained in good detail without any fancy technical terms. Just curious how you ran the wires for your right surrounds since the wires would have to go across the floor.

[@Youthman]

Thank you kindly. This is only a temporary setup for this video series so I just ran them along the floor. It wasn’t pretty 🤣

[@tfk40]

@@Youthman yeah I doubt your wife would let you keep that set up in the living room when you have a dedicated theater already. 😄

[@Youthman]

when we bought our home 16 years ago, the “deal” was I can do whatever I want in the Dedicated theater room, but no speakers and the rest of the house. After many years, she finally said I could have a pair of speakers in the living room, but she want new furniture. DONE 🤣🤣🤣

[@corypetersen5081]

i got 2 12 inch klipsch r120 sw in my living room ,what level did you have your subs set to on the back ?i was wondering just to know whats a safe level to have it at so when turning up the volume its all good

[@charlesking4843]

Do you think surround placement is nearly as critical as front stage placement? I have an open room and ideal placement for surrounds would look awkward.

[@reedrobb]

Thanks for the tips. Can you help me? My new theatre uses Epson 5050ub and I supplied my Denon avr with Monoprice 4K High Speed HDMI Cable 35ft - CL2 In Wall Rated 18Gbps Active Black. However, when pressing PLAY on my UHD or switching menus on movies, or selecting scenes there is a 2-3 second video delay. The audio is instantaneous. Any idea why this lag occurs?

[@askaritnc]

I've got a pair of the Klipsch R625fa up-firing speakers and I can't figure out if they are supposed to be wired lower to upper terminals, or on separate wires directly from my Denon X3300W 7.2 AVR

[@melthompson8520]

Youthman always doing God's work. 👊🏽

[@Youthman]

I do my best.

[@chrisbullock6477]

One of those Save to Playlist videos.

[@Youthman]

Thanks brother. Glad you enjoyed it

[@johnsmith-qz4bv]

great video

[@Youthman]

Thank you, John

[@pedroortiz9744]

THANK YOU!!!

[@Youthman]

You’re very welcome Pedro. Thanks for watching.

[@mikegreenemeiers914]

❤ your comments

[@pingui1488]

which center is better for Klipsch Rp800f - 504c or 504cII?

[@Thug2u]

I have 110hz speakers and my avr only has 100hz or 120hz selections is it ok to set avr to 100hz for my 110hz speakers or is it best to keep them at 120hz? Any help would be appreciated thank you....

[@TheUglyHooker]

Great video.......

[@Youthman]

Thank you kindly

[@MrHauntedcn]

I would love to see a cable management guide.

[@sawyerramos3113]

What is the diffrerence between RP-8000F II 2.0 and the R-600F Horn-Loaded speaker from Klipsch, please! I think I was able to figure out the difference is speaker size, one is 6 the other is 8 inches, how come they both put out 400 watts? what is the advantage of the 8 inch then?

[@tacticaltrumpet3561]

New subscriber here. In my setup I'm forced to have my couch against the back wall. Should I do 5.1.2 or 5.1.4? I 'm doing in wall for the surround and in ceiling speakers for the Atmos. Small room 12' wide, 15' deep with 8' ceiling. Does the 5.1.2 setup make more sense since my back is to the wall? Thanks!

[@Youthman]

I agree with you. I’m not sure having for Atmos would provide much benefit. Unfortunately, we all have to deal with not so perfect rooms and have to do the best with what we have.

[@DevilDogGaming]

I own a Onkyo 6050. How do level match to reference if I can’t start a 0db on the volume. Mine is only 0-99 on the volume.

[@mappu7612]

Monoprice Klipsch RP 600M speaker stand link is?

[@heyjugsy]

Youthman - Thanks for your videos on Klipsch speakers. I am currently looking for a 5.1 system in my living room (25' x 15' x 18'). Considering the following options (primarily for HT): a. Klipsch RP 8000 ii; Klipsch 504C ii; Klipsch RP 500 ii (as rear/ surrounds) b. Klipsch RF 7 iii; Klipsch RC 64 iii; Klipsch RP 500 ii (as rear/ surrounds). I would pair it with an Outlaw LFM 1EX sub. Currently own Ascends (CMTs + CBMs, same sub), which I wiull be moving to the media space in basement. Would like to know your thoughts on the options.

[@Youthman]

The reference premier system offers a lot of bang for your buck. The RF7 III is a significant improvement due to the 1.75” compression driver, massive dial 10” woofers and you step up to real wood veneer.

[@jagdishprabhu617]

Got it. I don’t play at loud volumes. Would there be a discernible difference in performance for lower to moderate volumes, especially considering the price difference?

[@hrdheeshaan271]

Hello there thanks for upload this video . I have a question how many watt RMS power needs for speakers for add to amplifier. ? I mean if my amp deliver power like 140 watts per 2 Channels driven. and then how many watts RMS we need to add speakers on right way?? Can I add speakers like 150 watts or 140 watts or 180 or 200?? Or more than 200?

[@Youthman]

The more clean power the better. I would have no problem driving a 100 watt or 150 watt rated speaker with a 200 wpc amp. You’ll likely never get close to using all 200 watts but it’s great to have on reserve when you need the additional horsepower.

[@hrdheeshaan271]

@@Youthman please can you Upload one video for Exactly how to match the speakers to the AVR or Power Amplifiers on right way. Also what happened if I run Speakers over power than the amplifiers and under power speakers than the amplifiers please. Very useful your video to the peoples and me thanks 🙏

[@MrGfunk215]

What is the difference between an “AVR” receiver and a “Processor?” Do I need both @youthman

[@luv2puf1]

what if I don't have height connections on my receiver, where do plug the atmos connections on my receiver then?

[@yasumreddysumanth4335]

i have Klipsch ceiling wireless speaker. which type of receiver should i use to use to connect my wireless speaker for my home theater system?

[@Youthman]

Wireless in-ceiling speakers? This is the first I have heard of them.

[@yasumreddysumanth4335]

when i purchased the house the klispsch ceiling speakers already installed. i dont see any wires outside/visible so, i am guessing the wires might be inside the wall. I use Legrand app to connect (via bluetooth) to the ceiling speakers and play ONLY audio songs from my phone. but now, i want to connect the ceiling speakers to home theatre system. i hope i am clear now. what type of recevier should i use here?

[@amineis7254]

Very well explained !

[@Youthman]

Thank you

[@evilboy7548]

how do you run pull the carpet from the baseboard to tuck it in?

[@Youthman]

Baseboards typically are installed on top of carpet so you should be able to tuck it in pretty easily as you are simply pushing the carpet down to slide the wire in

[@peppersmith]

Nice, info to pass on.. Plug them in & Tune it Up!!🙂😂

[@Youthman]

Thank you pepper

[@crispykid09]

I used the SPL Meter on my phone and I got 10+ db on my two front speakers and 11+ db on my center channel, I think reference is 75 and that was the measurements when I used the SPL Meter (I heard z is better than c). I'm scared now because you said anything above 0 db is a risk for damaging your speakers. Do u know what I'm doing wrong?

[@carlosesteban271]

I’m not sure if you mentioned it but which speaker stands are you using?

[@Youthman]

I mentioned them in the review kzbin.info/www/bejne/g5aucpWGfK51ack They are Monolith stands.

[@DevinAWhiting]

By the way.good job on articulating the information.well done.

[@Youthman]

Thank you, Devin

[@Mjaybird]

What speaker wires do you use with the Klipsch?

[@Youthman]

Nothing fancy. Monoprice 14 gauge.

[@coachvelarde]

I have a couple of questions. Here is my setup: Denon 4700 Klipsch R-625FA Dolby Atmos Floor stand speakers Klipsch RP- 504C II center channel Klipsch R-41M Bookshelf speakers Klipsch R-12SW subwoofer 1-What are your suggestions for the crossover settings? 2- What are your suggestions for the db level for all the speakers? This is where I am confused.

[@coachvelarde]

Did the calibration again and here are the results. Should I change anything? Front- 40hz Center- 40hz Surround- 60 hz Front Dolby- 90hz

[@Sebastiano1394]

Do you guys know if Klipsch is coming out with another sub (the beast)? Or is the RP1600SW what they were referring to? Just want to know so I can purchase the 1600SW now or if I need to wait for the beast to come out lol

[@Youthman]

Hi Caleb, I have confirmed with Klipsch that the RP 1600 SW is not the beast. The beast is still under development, but there’s no timeline on when it will be announced. It’s been over a year since they first mentioned it on our podcast.

[@Sebastiano1394]

@@Youthman Thank you for the info!

[@fredmccarroll3476]

Nice informative video! I purchased a Klipsch Synergy 7.1 surround sound system for my living room back in 2010. I wish I could upgrade, but after retirement and living only on social security it would be hard for me to upgrade. But my system still sounds as good as the day of purchase and I'm satisfied with the system. My speaker system is connected to a Yamaha 7.2 A/V receiver. I have my TV connected along with my two Tascam CD/Recorders, Music Hall turntable, Pioneer RT-1020L reel to reel tape deck, and my computer desktop. By the way, my living room is 12' by 21'. My sub is the Klipsch SW-450 downfiring sub.

[@Youthman]

Appreciate it Fred

[@linkinparkfan65]

What you think of my home theater system I have a full Cambridge sound works system Amp is a pioneer vsx-90 Fronts are a pair of csw t500 Rears are a pair of csw m50 My height speakers are a set csw s300 My subs are csw 1000 and the built is subs on my t500s And my center channel is some csw oversized center My tv is a 55in lg c1 oled and an xbox series x

[@dirtyminerapparel]

Sweet video brother! We have a setup like this at the moment. I have rack mounted amps set aside and I’m waiting to get JTR’s to build a dedicated room in the future.

[@Youthman]

Thank you Dirty Minor

[@dirtyminerapparel]

@@Youthman to clear that up we mine for gold on the Discovery Channels Gold Rush series. 👍

[@Youthman]

That’s awesome! No need to clear anything up. I didn’t think anything of it. 😉

[@dirtyminerapparel]

@@Youthman I was giving you a hard time because you said Minor not Miner. 😂

[@Youthman]

Oh!!!! Hahaha my bad. I think I was exhausted after three days of filming and editing my last video and then jumping into a 3.5hr podcast last night.

[@kylethiede9463]

On the 8060 fa speaker where do you plug the height speaker wire to on the reciever?

[@Youthman]

To your front Atmos speakers.

[@kylethiede9463]

@@Youthman I just ordered an onkyo receiver on the back will it say front atmos speaker or will it say height etc. I've had sound bars I just last night bought the receiver the 8060 and the 5040 center and the 12 sub. I know the fronts are self explanatory but the height speaker wire is my concern where to plug it into on the reciever

[@Youthman]

@kylethiede9463 what model Onkyo?

[@kylethiede9463]

@@Youthman Onkyo TX-NR6100 7.2 Channel

[@kylethiede9463]

It's what klipsch had on there website with their speakers. So I figured why not

[@bigk7788]

Was there a reason you decided not to use the hdmi eARC out from the pioneer to the TV? I have everything ran to the pioneer then use the hdmi eARC out to the TV.

[@Youthman]

That’s exactly how I had it connected. But I think I forgot to include that in the video lol. Honestly, this was a 3 day film and edit. Probably the most time I’ve spent on a video. I may need to make a follow up video.

[@bigk7788]

@@Youthman still made a killer video. For a complete how to setup getting the information to the TV is kinda important for a home theater lol. If you make a follow up maybe you can describe the pros and cons of different HDMI cables, like optical hdmi for long distances, 2.0 and 2.1... etc...

[@scitubelimitless1181]

Make a video on latest Dolby 7.1

[@Youthman]

Due to my open layout, I do not have anywhere to add surround back speakers in my room. If you want a 7.1, check out the original series here kzbin.info/www/bejne/pn3UnpKebK6WZ8U

[@christianbier1678]

Hey Youthman can you talk about the new Klipsch subwoofers and see if they meet the criteria expectations? Is it all the rave? I have had many Kliosch subwoofers fail on me I want to go back to a Klipsch subwoofer. I have a SVS PC-2000 PRO still under warranty bought 07/22 any ideas on how to sell? Klipsch all the way! Thank you. If anyone is interested, please let me know. Especially in the comments here.

[@Youthman]

Hey Christian, I have not yet received any of the new Subwoofers to be able to comment on them personally. I do have high hopes for them, but time will tell once more people get them in their hands and have used them for a while.

[@blue13x]

If using dolby enabled speakers, like you are using, so 5.1.4, the surrounds speakers should be 90 to 110 degrees, and not the 110 to 120 degrees like you stated, as this only applies for a regular 5.1. That means that you correctly positioned the surrounds in a 90 degree angle as the Dolby guidelines indicate. See page 30 of the guidelines.

[@Youthman]

You’re absolutely correct those are the guidelines for a 5.1.4 set up. But if I had placed the speakers where Dolby recommends, they would have blocked the walkway behind the couch and the entrance to my outdoor living area. That just was not an option. Every room has limitations and we have to do the best within those limitations. Even my dedicated theater room has limitations and is not a perfect setup. But man it sure brings a massive smile to my face every time I use it.

[@blue13x]

@@Youthman you placed them at 90 degrees...thats exactly what the guideline says...see page 30.

[@Youthman]

From what Ibsee on this page, it’s showing 110 a 120. Am I missing something? www.dolby.com/about/support/guide/speaker-setup-guides/5.1.4-dolby-atmos-enabled-speaker-setup-guide/

[@blue13x]

@@Youthman thats why the confusion. The comprehensive 60 page setup guide from Dolbyin pdf form says something totally different at page 30: www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf

[@Lowkey_nxthxn]

How do those atmos speaker sound on the bookshelf and tower instead of height speakers?

[@totalplonker824]

Bouncy bouncy are nowhere near as good as the real thing

[@Lowkey_nxthxn]

@@totalplonker824 yeah I have front heights but I always wonder if they are any good

[@totalplonker824]

@@Lowkey_nxthxn where you said "front Heights" do you actually height speakers or are you on about the bouncy bouncers...

[@Lowkey_nxthxn]

@@totalplonker824 no I use front height speakers In a 5.2.2 configuration but I was always wondering if those dolby enable speakers would be better since dolby always promotes them

[@Youthman]

Height speakers would be a better option than up firing speakers.

[@mre507]

How do I connect a wired microphone to a Sony receiver?

[@Youthman]

Your Sony AVR should have shipped with a mic similar to this - amzn.to/4a29seo

[@jeffreystockton9230]

Why didn’t you show what plug in last from the speakers go where on AVR? I only saw sub

[@Youthman]

I can’t show every step in every video. kzbin.info/www/bejne/i32oYpqaaquqrqssi=wC-8PBLblM0BMo8g

[@cyberlight22]

I know you're a Klipsch person, but what do you think about Polk audio?

[@Youthman]

My first home theater was Polk. Klipsch tend to be brighter, more detailed and forward sounding (which my ears prefer) but I thoroughly enjoyed the new Polk Reserve series. Search my channel for that video.

[@cyberlight22]

The only reason I’m asking is because I currently have a Bose acoustic mass system and I am trying to upgrade my system. I’m either going for Klipsch or Polk audio.

[@flashdigital6539]

how much this ?

[@victorpulos823]

Good video

[@Youthman]

Thank you very much Victor

[@chrissheldrick4073]

More good stuff.. If only this advice was available 20 years ago..

[@Youthman]

Thanks Chris I know I wish I had access to videos like this when I was starting out. I had to figure it out on my own.

[@DefinitelyNotSpam]

All those speakers... for that TV? Hope you upgraded the TV later.

[@Youthman]

I only have two towers in my living room setup. This system was sent for review.

[@SOUNDINTHECITY]

👍🏼

[@senthilkannan3742]

How much price friend

[@Youthman]

Links are in the description.

[@ryansangalang343]

What can I do if I want a 5.2.4 setup but my couch is against the wall?

[@tacticaltrumpet3561]

This is my question as well. Should I do a 5.1.2 setup, or do a 5.1.4? I'm doing in wall for the surround and in ceiling speakers for the Atmos. Small room 12' wide, 15' deep with 8' ceiling.

[@Youthman]

I’m not sure having for Atmos speakers would be of much benefit if your couch is against the wall

[@ryansangalang343]

Maybe I should just win the lotto and build a new house with a theater room. Haha! I'm wondering if the couch is against the back wall and have the ceiling speakers directly above the couch, would it give that aerial sound effect?

[@Youthman]

Again, it’s not ideal because typically you want to have two speakers slightly ahead of you, and two speakers slightly behind you for a really immersive Atmos experience. You can get overhead affects when they are directly above you, you just won’t have the option of experiencing sound panning from say the front of the room above you to the rear of the room behind you. Thinking of movies like Gravity, Top Gun Maverick and A Quiet Place

[@ryansangalang343]

Thanks for the advice. Have a great day! I'll figure something out to make my setup better.

[@deeprelaxingchannel9305]

I have read and watch 100 of hours on the topic: Home Theater, as I am building my own, but how can I have missed that the SUB crossover needs to be set at LFE or as High as possible and let the AVR do the crossover work. When I get home from work I need to set it accordingly..

[@michaelburton5198]

HEY I DEFINITELY LOVE ❤️ WHEN U TECHNO DAD ( THE ORIGINAL SUSPECTS LOL!) DO THIS! YOU HAVE NO I IDEAL!!!! ABSOLUTELY LOVE THESE TYPE OF VIDS!!!! I APPRECIATE YOU BIG TIME, YOUTHMAN!

[@Youthman]

I’m glad you found the video helpful. This is definitely one of the most in-depth, and difficult videos that I have filmed and edited.

[@michaelburton5198]

@@Youthman , That's Probably Why I APPRECIATE It Even More! Thanks A Big Bunch!

[@peterrabbit2719]

What is the cost of this entire home theater?

[@Youthman]

I don’t remember. I have links to each item in the description.