How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview

[@solarpartsofficial6511]

Thanks for your suggestion. Please click this link to continue watching videos without music. kzbin.info/www/bejne/rWauloWZmbR1mKc How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview

[@Daniel-oh2be]

Didn't realize I had to change battery type. Good thing I saw this video first.

[@intabusa1043]

Рекомендую. Отличное видео. Очень понятное. Без лишней болтовни и физиономий.

[@solarpartsofficial6511]

thanks for your recommendations.good luck!

[@SkyFly099]

thanks for this short helpful tutorial

[@paulmshanga3310]

Simple and straightforward

[@solarpartsofficial6511]

thanks and enjoys!

[@bryanb5895]

Good job on vid. The music is rediculously load.

[@sandybarnes6566]

I agree. The music does nothing to enhance the audio - in fact it makes it harder to follow the instructions. Get rid of it or lower the volume

[@KorbsFarm]

❤❤❤❤❤❤❤ the setting wow amazing

[@Experts_Say]

Hello, Could, should, would you introduce a battery charger to an off grid solar setup with this exact charge controler, so as the generator is on to run the Lawnmower you could take the chance to charge the batteries too, (12v lead acid leisure batteries), especially on the days the sun does not shine. If so, would you disconnect the charge controller? I'd be wanting maximum amps like 6 or 12amps going into the batteries during the 15 mins of grass cutting.

[@steveiliev8912]

Hi there! What setting is for lifepo4 battery? And what is “strand”? How would I know how many strands is my LIFEPO4 battery? Thank You!

[@johnle231]

B04 for lifepo4

[@johnle231]

If your battery is 12v, then you have 4 strands/string

[@steveiliev8912]

Thanks! I have it figured out! 👋

[@davidoanning1805]

So can it charge 24v lifepo4 since its 8strand

[@steveiliev8912]

@@davidoanning1805 Thanks for the help ! 👋

[@saintgilbert3095]

helpful

[@Princess_Of_Charming]

Thanks for your amazing explanation.. Can you please tell me in detail what the function of up and down key is and how to do it?

[@georgesmith4509]

seems to be the info I'm seeking thanks.the speed at which it delivered mean I'll need to watch it several times BUT why the loud music?

[@Pindi44]

Could have done without the annoying and distracting music

[@LegendLength]

could also explain the actual menu, like setting the time so that the timer knows when dusk starts

[@OggyGTA]

Could also have done without the terrible English translation text-to-voice narration.

[@solarpartsofficial6511]

Thanks for your suggestion. Please click this link to continue watching videos without music. kzbin.info/www/bejne/rWauloWZmbR1mKc How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview

[@Kidthatlikestech]

Bro took criticism amazingly

[@AndreeaCe]

Ohh boy 😅

[@akatamarvelous4687]

Please I’m making use of 18650 batteries and I also have this type of change control my question is how do I select and know the battery type of 18650

[@giogra8005]

Can you also program the load to be 24volt?

[@WW-fv1se]

I want to change the input from the panels to 24V, but i don't see any settings for that.

[@tomfrajman]

What should i select for AGM battery? Thanks for help.

[@andyharris41]

Hello im trying to find out the same question, I've had my set up for well over 3 years and have it set 2 default and didn't no about the different settings only looking now as upgrading the panels.

[@tharwa2539]

Hello,bro The solar controller SY3024H Can be used with solar power plate 210V?

[@adamtait2587]

Thanks for the help

[@foreversingle1975]

Which settings is for lead acid

[@tomchal6454]

Hi I would like to ask - can I connect controller directly to soler panel and charge usb devices or do I need battery. And Is controller going to show any walues if I connect it directly to solar panel.

[@barnaclelevi]

It will work....but be careful for excess current . You can use any used /second hand rechargeable battery with correct voltage to remove the flow of electric. If you don't want to use a battery then make sure to remove the panel from sunlight after phones charges.

[@ouroborosirvington]

Stand by to let the magic smoke out

[@Sam-ij2sd]

My controller crashes when I plug in a USB cable. Please help. Thanks

[@Sam-ij2sd]

​@@barnaclelevi my controller crashes as soon as I plug in a USB cable. Please help me, thanks

[@ouroborosirvington]

@@Sam-ij2sd a 12v solar system needs a 12v battery connected to the controller first and then you wire in the panel. You cannot use a basic cheap controller wired to a panel and draw power from it, it simply doesn't work. I don't know why but I have tried it myself and ended up "letting out the magic smoke" which is the term used for frying the controller and witnessing a pop noise followed by a small puff of black smoke. I then had to wait an extra month before I could afford to buy a battery along with a new controller. Lesson learned.

[@14bqdonk]

nice

[@alexandrunistoroiu452]

Hi man, does it work without battery?!? Meaning inputing both "panel" and "battery" spliting cables from the panel

[@anaborella1972]

Hi! Thank you for the video! I have the controller, the battery (sealed) and the panel 100W but not the connecting wires. Can someone tell me the specifics for the wires?

[@davek8727]

I do 4 AWG gauge wires from the battery/s to the charge controller and from the batteries to the inverter (these are high amps/current) and 10-12 AWG gauge from the panel/s to the charge controller. 14 AWG wires from my 4 100W panels get hot at the splice connections aka fire hazard. I've seen these panels push 10A. Think about expansion, too. You may want to add panels and/or batteries like I did, so go with bigass wires as you can afford.

[@lawrencedavidson6195]

The thicker the wires the better.

[@rightright6582]

b01 is sealed? is that the normal type of battery? can it charged 2, two, batteries in parallel 12v?

[@noahriding5780]

When you use these, there's the USB slots that are supposedly for a small load. I had a question about that; does the USB have to be a small load or can it be a small incoming power solar slot also? (There are solar panels that have USB connections). Hope someone can reply to this. Thank you.

[@dirtyaznstyle4156]

The usb is wired so that it outputs the specific 5v, it’s one way since it’s not monitored by the controller. Like you won’t be able to tell how many amps is being used by the device connected to the usb port

[@Starboy_698]

@noahriding5780 , USB output: 5V/2.5A maximum

[@andrewsmyth8615]

When the battery is fully charged will the controller stop charging?

[@JesusOurKing]

Can these lead acid-type solar controllers be used to charge Vtoman or Jackery power stations with internal lithium phosphate (LiFePO4) cells?

[@bonza167]

I've got a kings version of one of these and can't set the lifepo4 option, but use it on the lead acid setting anyway, seems to work ok

[@bernswonger57]

No charge controller is required for Jackery type solar generators. Plug into it, directly from the solar panel. The charge controller is built in.

[@thamernz]

I have AGM battery which type should I choose?

[@delynnaddams8774]

What is the light voltage output? 5 or 12 volts?

[@unionville533]

12 volts. The USB ports output 5 volts.

[@mackychloe]

@@unionville533 So I could charge power banks?

[@unionville533]

@@mackychloe Yes, the USB output can be used to charge power banks that have USB inputs.

[@mackychloe]

@@unionville533 Can it be done direct or do i still need the 12v battery?

[@davidoanning1805]

Pls if i connected two 12v lithium batteries (4strandsx2) what option should i pick?

[@michaelrowland-us3he]

What about maximum battery voltage setting?

[@matejhlaca5171]

I have 250W 36v PV panel and 12V battery. Can be connected?

[@Jacob-og9pz]

Make sure you have the right amperage for the battery bank

[@andrewknight6853]

i don't understand all the lithium settings i.e. 4 strands , 5 strands, what does this mean

[@HardcoreHokage]

it means series connection. For example 4s is four batteries wired in series.

[@ReodorF1]

Is the bulb 12v? can i use a car bulb led or something that is 12v?

[@arnaudj2708]

is it possible to limit charging current ?

[@michaelsrowland]

I have this . Where does it show the voltage of the battery without a usb device charging? Also when i put a device in the usb output the number always changes and it goes higher .why?

[@Sam-ij2sd]

When I plug in a USB cable the controller crashes

[@rokerman]

Can anyone help please? What would a 'wet' battery be please? Its a Solarflex SFL110.

[@mahboobahmad429]

Can I connect solar charge controller with solar panel without battery and then connect my DC load??? Please reply to my question as soon as possible.

[@Antesdelfinadmin]

I just installed the very same controller but neither of the USB ports are working. Any ideas on why?

[@eddyk6853]

You may need to turn on the "output" by pushing the right hand button.. Icon will show on the display if ON

[@Antesdelfinadmin]

@@eddyk6853 As a matter of fact, that was the solution. Thanks!

[@bobprobert353]

Mine only says b 1-3 when changing battery type. What does this mean?

[@ioanros6576]

Lead,sealed,gel

[@bobprobert353]

@@ioanros6576 Thankyou very much! :)

[@WW-fv1se]

@@bobprobert353 i thought the video said sealed, gel, flood.

[@MuhammadImran-ii8we]

I have 575 watt solar panel wich controller I use??

[@thomasiconmsn]

What is det Max load for the terminal

[@matteogamba2695]

which size of cables to connect the solar controller to the battery?

[@zubyair]

can I use this controler for 24 volts solar panel for 12 volts singel battery charge

[@solarpartsofficial6511]

yes, you can use, the controller are automatically changed the output voltage when contact to the battery. thanks!

[@aLinuxIce]

what to set when i use a 380W solar pannel and 2 12v batteries ?

[@robbrown6495]

There's a lot more to setting it up that you conveniently omitted.

[@Sam-ij2sd]

The controller crashes when I plug in a USB cable to charge my phone

[@lawrencedavidson6195]

@@Sam-ij2sd controller may be bad.

[@miltonritfeld9389]

Thanx a Million. I did not know Gel battery was b2. I thought my battery had a problem. Music not so nice

[@ioanros6576]

I had almost the same problem . I've got a sealed battery and the controller settings was on b02(gel) . I couldn't set it more than 12,6 Volt .Once I changed to b01 went to 14.4 Volt. Many thanks! 🙏

[@cynthiapower02]

​​@@ioanros6576 Good day, please assist, do you add an inverter to this mix, and what role does it play.? I'm located at a place where electricians are doubling up as solar installers but without necessary training. I'm the owner who doesn't want their house to go up in flames. Thank you.

[@Zulqarnain2000]

I have connected the battery, but there is no display . Can you please advise.

[@sanwomashi1751]

Battery 12V - loose contact or buy new :)

[@lumen5699]

Vai...panel pani diya poriskar korar jonne.. J water nozol pawa jay seigulo ki ache apnar kase?

[@jenfrench921]

can we use this charge controller for DC to water pump?

[@BudgetTechUKYT]

If its a dc pump yes

[@fifihome1386]

i use this controller to a car 12v batterey then a timer to a 12v dc water pump to heat my spa through a water coil .. been good 2 years now

[@rtfbdfgsdfgbd]

why i dont have any voltage on the load output? set on 24h mode and the load icon is on

[@LightYagami69-69]

Quick question whenever I connect the battery to the charge controller while the solar is connected the charge controller just turns off how do I fix that issue?

[@davek8727]

Always hook up the battery/s first, then the panels. Opposite when disconnecting, unplug panels 1st, then batteries.

[@engineerivan1525]

How can I reset?My Pwp is flickering yet battery is not full.

[@unllock548]

you use just clips to connect the battery - what happens in one clip goes away while the panel is connected? will the controller destroyed?

[@sailingdev]

will turn off, unless you short them nothing should happen to it

[@sanwomashi1751]

manual : 1. disconnect solar panel then 2. connect battery and then panel

[@martinf8508]

My charge controller just flashes 10.4v and 21.3v repeatedly. None of the buttons do a thing.

[@philipchristensen8429]

Thank you, I thought I might be the only one.

[@bobprobert353]

What is the wire used please?

[@sailingdev]

what wire?

[@ja.935g67]

What if I want to charge ultra capacitors there ain't no setting for that

[@firdausbj1]

Can the usb ports be used to charge my powerbank ?

[@sanwomashi1751]

yes

[@davidrobert6144]

My USB port charges extremely slow. Is there any fix to it

[@WW-fv1se]

@@davidrobert6144 no there isnt, there are very basic 2A max combined lol.

[@emski.i]

This video might have been helpful, but I stopped it 12 secs in because I'm here for instructions, not a disco.

[@Winnipeg2024]

😂😂😂

[@OpayAccount]

Can i connect my pc to controller to my panel?

[@HardcoreHokage]

put your pc on the roof.

[@Jerome34858]

10a controler 100watts na panel.ano po ang pinakamalaking batery po ang pwede..?

[@icantok4285]

The question is How if the landlord leave their home and there is no home's load used while landlords leave their home at all and all batteries is fully charged? Where does the solar panel energy will go or delivered when a daylight time and solar panel within produce the energy condition? Anyone can help to explained to me please?

[@WW-fv1se]

The panel is switched to open, so no current flows from the panels anywhere. When the charge condition is needed, and the panel has the correct voltage, then the panel charges the battery. The controller is in charge of the switching.

[@wesr.e.3909]

I would have enjoyed the video more and learned more, IF the background music wasn't so loud.

[@bonza167]

good video spoilt by the loud crap elevator music that drowned out the narrative

[@ZubairAhmad-x3h]

How to adjust for 24v battery

[@sanwomashi1751]

automatic

[@sanwomashi1751]

I think solar controller 10 A (not 10Ah) - ver. 10 A ( this for 12v solar panel) can connect 10A x 12V=120 W (solar panel max) - also can connect solar panel 18V but max 120 W solar panel !!!!

[@theusconstitution1776]

They do not work IN A HOT ENVIRONMENT ABOVE 85° SCREEN GOES OFF SO YOU HAVE TO PUT IT IN THE GROUND IN THE BATTERY BOX OR SOMETHING😀

[@tertiusstrydom6784]

My inverter keep switching off when connected to the controler

[@resrudeboy]

did you solve this?

[@cynthiapower02]

Sorry, but does this mean that an inverter is not required in this setup.? Someone please assist a novice DIY enthusiast. Thank you.

[@WW-fv1se]

if you want 110VAC then you need an inverter. this is 12-24VDC.

[@geriatric-y6w]

Turn the music volume up louder please, I can still hear the person speaking

[@maquadri18531]

Music annoying 😐

[@Sameerkkp122]

I can use cd 70 bike bettery

[@kenrickwhyte8645]

Music ain’t needed

[@jackcarterog001]

The music is too loud

[@solarpartsofficial6511]

Please click this link to continue watching videos without music. kzbin.info/www/bejne/rWauloWZmbR1mKc How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview

[@ianluther3765]

Possibly the worst ever music when trying to concentrate.

[@AC-lp5uo]

This controller does not seem to turn on ?? All nice video, just doesn't seem to come alive????

[@sailingdev]

battery might be dead

[@oete9259]

Strand type this and that ?? I have lifepo4 what the hell was going to subscribe but what's he talking about? no explanation

[@Chinhnguyen0497]

what the hell is the battery type?

[@THUvidz]

Lead, agm, gel acid and so on...

[@damilolaafolayan1392]

​@@THUvidz pls I'm using AGM battery what number should I set it is it b1 or b2

[@mycrustybits]

b02 gel@@damilolaafolayan1392

[@omoloni]

who is know how see Ampere value

[@THUvidz]

Can't i think. If you want to see how much A use a clamp meter

[@alanmackenzie1595]

@@THUvidz That only works on AC

[@ep4no]

Contraller

[@FlightSim2703]

All these controllers kill the battery no matter what 🤯

[@michaelsrowland]

What do you mean? How?

[@philliproberts3180]

Drop the back ground music it's irritating and doesn't help at all.

[@jmemusic]

KZbin is trash. It deleted my question 😞. It wasn't spam, but the stupid KZbin filters thing it is

[@DonJenkins-z1e]

Annoying Music

[@jamiecleeves7921]

what stupid loud music

[@JonathanFunkhouseMonkhouse]

Please stop all AI narration

[@videomentaryproductionschannel]

Why have you got that ridiculous music so loud, it's ment to be back ground music , it's fighting with the niration 😢 very poor video😢

[@johnbrown-rm8kc]

the music is very distracting. totally unnecessary.

[@trainmaster0217]

Almost useless as there is no explanation about settings. The music was horrible.

[@Dutcharmytent]

Annoying overly loud music made the video unwatchable. Probably aimed at 16 year olds. Worse video I have ever listened to. Everyone else thinks the same thing. Please put it back up without music, it’s not even music, it’s like waiting on a call to the dentist, in fact I would rather go to the dentist and have a tooth pulled out.

[@roseymalino9855]

No one would tolerate waiting in the dentist or any waiting room with that racket. It's the type 'music' used for psychological torture.

[@solarpartsofficial6511]

Please click this link to continue watching videos without music. kzbin.info/www/bejne/rWauloWZmbR1mKc How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview

[@solarpartsofficial6511]

Please click this link to continue watching videos without music. kzbin.info/www/bejne/rWauloWZmbR1mKc How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview@@roseymalino9855

[@sproket168]

Shit

[@NotaHuskywolf]

Don't buy

[@andyharris41]

Hi guys what would a hlb800 AGM be set to ?

[@moosesamli4569]

Complete JUNK ! Don’t waste your money. Mine both died after 3 months.

[@nzeataugochi7588]

My solar charge controller is charging, but the battery indicator is empty please what do I do?

[@Sam-ij2sd]

It crashes when I plug in a USB cable to charge my phone