How to Setup and Configure TFTP Server using Tftpd64/Tftpd32 on Windows 10

[@goruby2]

Don't reboot your switch after you removed the ios. If you do it will boot in rommon mode and that's a whole different animal .

[@networktutor640]

Yes. If you remove the OS you need to have different OS in place before you reboot for sure.

[@rodrigomuriano6742]

@@networktutor640 I did it, what is the solution? :c

[@marekmiklovic9514]

@@rodrigomuriano6742 sounds like a nightmare did u fix it?

[@RodneyandMiriamBroaddus]

Can you do the same for a VOIP phone where you would point the phone to your laptop to receive it's firmware instead of retrieving it from the cloud?

[@travisabriggs1]

Gods bless you for this video

[@networktutor640]

Thanks for your kind words. God bless you also.

[@josephkemei3259]

Very nice topic Sir thanks for that.....can you import huawei routers firmware using tftp?

[@networktutor640]

i am not familier with huawei routers but all routers should support the common tftp protocol IMO

[@avimakkar]

thanks it worked.

[@networktutor640]

You're welcome!

[@babydoll2947]

Sir I have a question why high performance of TFTP server is crucial

[@networktutor640]

if you are running a commercial tftp then yes. but not for test environemnt ans such. Normally in corporate setting, we run tftp on a linux bos that is used for other purpose also. In this case this linux box serve multiple purpose we allocate more cpu and memory on vm settings. As you know VM is very common and you can dynamicaly allocate memory and cpu on the fly based on needs. VM monitoring tells you if a server is running high on reseouces or not. Hope this helps.

[@prashantghadge6732]

Speed is very slow and it timed out after sometime any reason ?

[@underratednerd8259]

Thank you!!

[@mdsahansha4214]

How to get 3.3 volt connection from rs232 9pin?

[@networktutor640]

sorry. i am not sure how to get 3.3 volt - may be you are going too deep into the layer 1. Hope someone else see this in my channel can help answer your question.

[@edh6096]

thanks, and I usually ping before attempting a copy

[@networktutor640]

Glad I could help

[@kofibonsu8466]

cheers mate, it worked

[@networktutor640]

glad to hear it worked for you.

[@arnelmalabanan7550]

nice

[@networktutor640]

Thanks

[@marekmiklovic9514]

firewall?

[@rb_ex24]

great. ty

[@networktutor640]

you are welcome.

[@Notounemployment]

this is for console login??

[@Tech-geeky]

2:30 I dunno why it works for people, I need to have DHCP enabled otherwise it fails, as in it can't find server. I am using VMWare, so its even more of a mystery that TFTP running on *it* (Windows 10) , i would of thought that would be handled by VMWare.... It does log which is good,, but ends up with "The specified file cannot be found" DO you need to extract contents from ISO image? because i already tried that...

[@kofibonsu8466]

turn off your firewall and try again

[@whyme2500]

Thanks

[@networktutor640]

Welcome

[@muntasermh]

Nice and easy.

[@networktutor640]

Thanks a lot 😊

[@justin-hall]

6:50

[@networktutor640]

let me know what is your question.