How to setup and install any Flight Controller // Under 5 Minutes

I don't work with anyone. Beware of Scammers Please Contact Only through My Email [e-mail]
Flight Controllers I recommend
www.banggood.com/Holybro-Kaku...
www.banggood.com/Matek-System...
The Perfect Setup
www.banggood.com/Holybro-Kaku...
Budget ESC
www.banggood.com/Racerstar-RS...
Best ESC
www.banggood.com/4X-Holybro-T...
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
You can also support the mission to document and test everything by using the affiliate links below.
ECS TESTING Excel Sheet
dronemeshlab.com/fpv-product-e...
------------------------------------
I highly recommend these boards over 2 months of testing best money can buy
Racerstar StarF4S
goo.gl/GeiaW1
Racerstar Star F3s
goo.gl/adcc2P
amzn.to/2A4J4Cl
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
goo.gl/mHW9HW
Batteries I use
www.banggood.com/Infinity-4S-...
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
www.banggood.com/300pcs-M3-Ny...
Xt60 Premade I use
www.banggood.com/2-X-XT60-Mal...
Heat shrink I mentioned
www.banggood.com/410pcs-21-Po...
Soldering station
www.banggood.com/909D-Rework-...
Checkout the website for more details on the reviews
Website updated 2 to 4 days after the release of the video
dronemeshlab.com
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
Contact: [e-mail]
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmastering.com
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398

[@kevintatum4903]

Sometimes I forget what I had to go through to learn this stuff and how many new people get into it every day. You’re helping someone for sure. Good job

[@archer4922]

Loving this series. I'm starting a new build and the stack I'm going to use isn't a combo so these vids are helping a lot. Keep up the great work

[@BuzZ.]

This series will be awesome for beginners !

[@robmalan7137]

These videos are definatly helping me! Thanks!

[@martykracher]

Great series! Just what I needed!!! Thanks for the video!!!

[@bradyrc818]

Oh how I love the SP Racing Boards, so easy to use and reliable 👌🏼👍🏻

[@rulerofgods215]

You did a real good job for a 5 minute video I liked it. Ty

[@texas-linemangaming731]

OmG thank you so much for this. Helps me understand so much that I didn't know.

[@MCsCreations]

Really nice, dude. Great content! 😊

[@b0rnt0bealive]

I'm in my debut in building quad and that kind of video is gold nugget.

[@satoriwabisabi]

i learned more in this 5 minute video about drone circuits than the infinite hours ive been watching other vids. tip of the hat my friend. thanks for the vid!

[@satoriwabisabi]

i immidiately subscribed btw 👊

[@greattech881]

great content. really love this channel!

[@dronereviewman9580]

this is great info LOVE THE CHANNEL

[@droneredneck170]

Good stuff brother!

[@robertfox5392]

This is a great video, very helpful.

[@mikehedrick4349]

Nice video. Very good explanation. Thanks.

[@johnsammons9788]

Always helpful.

[@nadau5027]

Great job 😍

[@overfly_pt]

Nice man 💪👍🆗✌️

[@ricktucker7560]

Hey DM! Just curious if you are going to test the latency of a Radiolink transmitter or start testing the frequency distribution of VTXs? As always, thanks for the content!

[@N8904V]

Good video

[@throttlenerd]

Hey man I think we all need a video on your recommendations regarding BLHeli motor timing and demag compensation for, say, regular/average modern 5” quads. Or should we leave it at stock and don’t bother?)

[@leeiberry]

great idea

[@evaguerin6741]

Very helpful, I joined your channel! Thanks for a return!

[@dbm5540]

I would like to see a video like this with smart port & smart audio, inverted uarts frsky receiver. There are not many videos like this as the new boards come out. Good job easy to follow. Thank You

[@DroneMesh]

DBM 55 I have ibus comming next and ESC telemetry soon after. Frsky is next on my list I need to organize it to be fast efficient and easy to understand.

[@dbm5540]

I will watch them all for sure.

[@andrewholzschuster427]

How do I connect the esc to the flight controller and what are all the plastic plugs on the side??

[@FlatlandFPV]

Awesome bro. Needing this. Want to start building these parts I got but have no idea. I have the F3 Evo, do I run my power from the PDB to where it says battery 2-6s? Just wanna make sure. Thanks for this video. 🤙

[@DroneMesh]

take 5v from the PDB 》 F3 EVO.

[@dronexfun8469]

I have been looking for a brushless quad that is stabilized and does not need to use the computer to make it fly. I just want to fly LOS with a brushless quad, do you know of any quads like that (other than Bugs) or a flight controller that would work? I hope I made sense. Thanks for sharing and happy holidays. 12/2018

[@oferpo]

Big fan of your work! whats your top choice for best VTX? looking for that extra clean image. thanks

[@DroneMesh]

I have been using the eachine tx526 on 90% of my builds and never had problems with vid. It's only $11

[@oferpo]

thanks, but im looking for a vtx with onboard LC filter and BEC, any recommendations?

[@DroneMesh]

Ofer Po No.. Best advice is good esc and low esr capacitor either rubycon or Panasonic 1000uf 25v or 35v

[@charlesbiggs7735]

Is there a video showing how to hookup the receiver?

[@IceCreams62]

Matek F722-STD doesn't have a 5 Volt regulator, Tekko32 4in1 doesn't have a 5 Volt regulator too. So i have to use a PDB (but the stack becomes very high, 3 layers plus VTX/Rx) or use an external BEC. Which way is the best for you and in case the best way is an external BEC, which BEC ?

[@johncarold]

Good Video for all NEWBEE'S

[@bastiaanjansen4867]

Really awesome that you're doing this! im using flysky so does ibus work with the matek flight controller?

[@DroneMesh]

Next video will be all about ibus and it's mysteries ;)

[@bastiaanjansen4867]

Drone Mesh thank you so much!!!!!

[@rovadevelfpv2359]

Thanks man, very useful vid. One question though, what would be the advantage of grounding your esc? Everyone say you can leave it off but it's there for a reason right?

[@DroneMesh]

Never tested but when ever i can I always cut it

[@honestreview9019]

I want to replace my f3 with f4 but I have escs on the quad so I I just buy a f4 then where do I solder the esc?

[@chrisstolle5664]

Love your vids. Got a question. I have a kakuteF4 with 3 flights until it freaked out into a spin of death. The CLI shows a NOGYRO flag and I cant find any info on how to fix it. The ribbon cable to the gyro isnt damaged. I have a low esr capacitor on the FC. Why would the fc gyro just die for no apparent reason?

[@DroneMesh]

Spin of death possible cause motor over heating did you smell the motors that one of the first things to check on a spin of death. Also check if air mode is on.

[@chrisstolle5664]

air mode is on, motors are all good. No electronic burning smell. Everything powers on just fine. Its just the NOGYRO flag on CLI error message. Cant fly without the gyro. THe board will power on but wont arm.

[@shozzy69]

Hi you say you can just cut the ground off the esc and not use what happens by doing this as it must be there for a reason ps keep up the good work and look forward regarding 4 in 1 esc and power to flight board

[@DroneMesh]

shozzy69 You can get away with cutting the signal ground which is the small black wire. I have built many without it but there are some theories that it could cause noise in video feed which I have not tested and still is a theory. If it's a 4in1 you will need ground if it's powering the FC.

[@shozzy69]

Drone Mesh cheers for the fast response it’s been great to see how quick your subs have grown in past few months

[@petrokemikal]

One thing you forgot to mention is there is a difference between power input and output..Most flight controllers have mini regulators that supply power to externals like cams, leds, vtx ect.. If you just find 5v and grnd on a flight controller that might be an output and not the actual power input of the flight controller.. Worst case you could actually damage the board by supplying power in the wrong direction..

[@Zach-yr8eu]

can you explain more about this?

[@Zach-yr8eu]

whats the differences and how do i know ishould wire to 12v or 5v?

[@quad55555]

is the holybro flight controller v1 any good i see u recommend v2

[@DroneMesh]

quad55555 Not much experience with it I personal would go for the V2 the layout has improved and flight characteristics are great.

[@dineshvyas]

Well if ground of esc is not connected you will troubleshoot your quad till eternity.

[@chansaechao79]

1st

[@stoiczfpv]

for some reason i can not get that sp f3 in boot load mode. its fucking annoying! although reliable fc

[@DroneMesh]

stoicz fpv you need to bridge the boot pads then connect USB. After you flash it unbridge the pads and connect to pc.

[@fatso4424]

1000 view

[@DARKRYDER7]

your rushing bro, this aint your flow :)

[@stoiczfpv]

agree

[@DroneMesh]

Trying to make it as fat as possible. I hate watching 20 min video for the smallest thing that i need from it.

[@helenparker3540]

ah dark ryder just hit pause and rewind.