How to Setup and Resaw on the Bandsaw with @WobyDesign

Support What We Do at The Katz-Moses Store lddy.no/stih
In this week’s woodworking skill builder we’re learning to resaw on the bandsaw with @WobyDesign. I walk you through setting up the cut and and dealing with large unwieldy objects. We also make a jig to make it easier. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
Check out the @WobyDesign channel here: / @wobydesign
Check out a my in depth tutorial on tuning up the bandsaw for perfect cuts: • Bandsaw Tune Up, Setup...
Check out Skateboard Dovetails here: Video coming soon. I will change this to a link when it comes out. (They look incredible and I can’t wait to see the video!)
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block Presale: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB01LWSQ5HBFFH5

[@katzmosestools]

Check out the @WobyDesign channel here: kzbin.info/door/DjSle78ri-xeH0oyfMWisg Check out a my in depth tutorial on tuning up the bandsaw for perfect cuts: kzbin.info/www/bejne/sKTPo6R3jpWKgs0 Check out Skateboard Dovetails here: Video coming soon. I will change this to a link when it comes out. (They look incredible and I can’t wait to see the video!)

[@SpencleyDesignCo]

Ahhhh hell yeah! Love seeing Ben in the shop!

[@woodpile20]

OverviewI had an old Black and Decker Firestorm set that was getting very long in the tooth kzbin.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv so it was an easy decision when this set went on sale. I'm not a pro or a handyman. I'm an occasional DIYer. So for me, this set is fantastic. I am very happy with my purchase.The Good Parts Very well priced for what you get Comes with everything you need - two batteries, a charger, and a carry bag The products feel very well made Not too heavy The drills are small and ergonomic (for my smallish hands) Huge ecosystem - Dewalt makes a lot of tools that use the same battery type and chargerCould Be Better I guess I could say that I wish the batteries were bigger, but that's a relatively minor compaint

[@terristroh3965]

Ben must have gotten spoiled with all the room to work!

[@diy-mitri9737]

My man Ben is really making it! Good for you guys. Keep up the collabs.

[@Uncle_Buzz]

Love that blue spalting! :D

[@aaronfenwick7704]

I love the way it has a marbled look as you start to cut into it. Definitely need to could come up with some creative ways to display that in a project.

[@rfdunbar]

Wow! What a difference this made for me in just a few minutes!

[@bhboyle]

Hey JKM, Thank you for this. I purchased a bandsaw a couple years ago and have had nothing but trouble getting straight cuts from it. After following this guide I am now a happy bandsaw owner and I am getting straight cuts at last.

[@sgsax]

Learned something new here. Now I need to go check on my bandsaw. Can't wait to see Ben's video! Thanks for sharing!

[@torilaumb9648]

Thanks for shouting out the ladies 😉

[@SawdustmakerLori]

Great tips for setting up the bandsaw.......thanks!

[@trahtrebor]

Thanks. I didnt know about centering to the gullet.

[@fatdogslow8011]

Love both of your channels. Great Co-lab.

[@pat_link_]

Thanks for the tutorial and great tips

[@nothereorthereoranywhere]

Been following @Wobydesign for a year and just found this vlog. Totally awesome information. Thank you for doing this. Will watch other vlogs. Learned so much.

[@Faber_Nox]

Yes boy! Woby and Katz!

[@markadamarnold]

Great info! Thanks!!!

[@andyiliff7793]

Those cross section are nuts!

[@bodibrodice147]

Great clear and concise video! I have a 1952 36" Do-All that I primarily use for metal work, but have been wanting to do some resaw work with as I know it is more than capable of quality cuts... Up until now my knowledge on how to best approach it has been the only thing preventing me from giving it a try. Thanks for doing such a great job sharing how to maximize the probability of success!

[@makethepart]

Great video J-Katz!

[@4skinnz]

I have a jet 15" and this is an outstanding video on tension, set up etc.

[@woogaloo]

Love Woby Design - this is a great collaboration! I'm excited to see how the dovetails turn out!

[@katzmosestools]

We had a lot of fun!

[@vonthoma2765]

Love both your guys' channels. Great to see the woodworking community coming together, definitely the best use of these here interwebs

[@juanantonioolintonatiuhbet6263]

Kate, you didn't let him say anything

[@briturner11]

Love Woby Design.

[@katzmosestools]

I am in like with him

[@michaeldunn5280]

As usual I learned something from your site:proper positioning of the band saw blade on the tire. Thanks JKM Harleymike/chicago

[@BradsWorkbench]

Very informative... now i just need a bandsaw

[@jtswoodworking4857]

Awesome video!

[@BevelishCreations]

Such a nice clear tutorial! I watched the whole thing even though I don’t have a bandsaw lolll

[@arbitrarystuff1229]

I love watching your projects. A wonderful mix of tradition and contemporary. Such an underrated creator. I'd love to see you do handcut joinery with Katz-Moses.

[@katzmosestools]

Yeah he's awesome!

[@BevelishCreations]

Arbitrary Stuff I’m not 100% sure if you’re talking about me, Jonathan, or Woby, but thank you! I actually bought the dovetail jig but haven’t had a chance to make a vise yet lol. It’ll happen one day!

[@arbitrarystuff1229]

@@BevelishCreations sorry. I was talking to you. I loved your recent drawers video and will try it soon with hand tools

[@BevelishCreations]

Arbitrary Stuff thanks! Really appreciate it :)

[@WoodenItBeNice]

Hi Jonathan, Love this video as I now don't think my DeWalt 3501 is set up properly. I have always run the blade in the middle of the wheel so as I need to put a new blade on I will do it your way and see the results. I will look at the full video to know what to do. Thanks Jonathan. Cheers, Huw

[@buffalojones341]

My shop is on pause right now, but when I was in it this summer, I was frustrated by my Laguna 18bx because I couldn’t get my hands in to adjust the guides correctly. Dunno why, but I never thought to take the table off! Thanks JKM!

[@heyimamaker]

👋 @WobyDesign 😁

[@joejr.971]

Fuck yes! Ben on the show, finally

[@SteveC38]

I'm going to check him out, Thanks JKM👍

[@elrayox8932]

Woby👍 Katz-Moses 👍

[@katzmosestools]

👏

[@retiredrookie7146]

When's the vid coming out on his channel with the dovetails?

[@homesteadorbust]

What bandsaw would you recommend for starting out hobbyists? Going in a garage shop Ps those skate boards looked awesome once cut

[@hippoandbearmakes3416]

Love the video and I don’t even have a bandsaw 😂😂😂😂

[@WobyDesign]

Where do you get your skateboards from?

[@chrisvanmill6020]

lol! So good!

[@katzmosestools]

I love this question! I actually am sponsored by Bones and Powell. They take new skateboards and run them through a rock tumbler for 4 days. Then they put grip tape with extra strong adhesive on it so I can have the joy of removing it with a heat gut and a dowel.

[@bigTHOR77]

I have the exact same bandsaw, dont ever seam to beat able to tune it up this good. I always have a little blade flutter, so when I set the breaing like you did, they turn slowly as the blade jangles against them slightly. Any thoughts on fixes? It's a new blade and I feel like the blade is pretty tight.

[@walterrider9600]

thank you Katz .

[@edpaine7982]

Never saw a black and orange bandsaw before, what is it?

[@stevebrost6483]

Does setting the gullet at the centre of the tire hold true no matter what size of blade? I have blades of varying sizes

[@rpmking691]

So I've been looking into resawing and everyone drills into the resaw piece. Is there a way to do it without drilling into the piece to get the most out of it?

[@georgedoe257]

How much pressure should you be applying to your piece as you push it through. I was trying to resaw, and my thrust bearing was screaming at me. Ceramic disc bearing.

[@104Tomcat]

Great video...thanks! Will you tell me the make & model of your band saw? I'm looking for one and I've seen nothing that looks like it.

[@katzmosestools]

It's the grizzly 17" anniversary edition. Great entry level 220v saw

[@torowazup1]

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🎉😎 I’m looking to resaw 3/4” white oak, etc. in half or anywhere from 1/8”, 1/4”, 3/8” etc. what’s the minimum bandsaw and blade that you would recommend? Thank You in advance 😎

[@gordoneng]

"..take off the table of my table saw.." :)

[@katzmosestools]

Like you're so perfect 😜

[@gordoneng]

@@katzmosestools LOL soooooo far from it brother.

[@andyboybennett]

The vid is not up on Ben's channel. Any news on when he'll put it up?

[@josephkrug8579]

Thanks for the tutorial. I am not sure I agree with putting the gullets there, as I did that for a brand new resaw king blade and had the proper tension set (according to the tension guide, I did not know your method at the time), and then after sawing for just a few pieces of wood (overall wood length sawn over a few weeks was not even 16 ft), the blade snapped due to cracks that formed in multiple places in the gullet area and not where the blade was welded together. I worked with the blade manufacturer, and they were great and sent me a replacement blade as it should not have failed like it did. I realize that can happen with a blade regardless of how you set it up, but if the highest tension is in the "machined and curved " area of metal, and there are any rougher spots or tiny machining chips/scratches...that is where cracks can more easily form and propagate. So I guess this is more of a "everyone should inspect their blade often and use proper safety". In any case, the rest of what you said is super helpful and that should make an awesome experience for anyone doing resawing. :)

[@katzmosestools]

I would stand behind this method to the death hahaha. You really should look up the Snodgrass method. He's the undisputed king of bandsaws. Blades can develop cracks if you leave them with tension overnight or it could have just been a faulty blade.

[@josephkrug8579]

@@katzmosestools Yeah, I was careful to leave it un-tensioned, but I agree it could have been a bad blade, and was really happy the blade manufacturer stood behind it to get me another one. I will check out the Snodgrass method, thanks for that and for always trying to put out such useful content. :)

[@luciano4841]

Bah, preciso muito de uma serra fita, deixo de fazer alguns trabalhos com toras justamente por medo de cortar elas na serra circular.

[@mikedodsonlabview]

We’re those factory guides on your bandsaw?

[@danallen698]

I understand putting the gullet blade on the crown of the wheel for the top wheel, but is this supposed to be true for the bottom wheel as well? I've found that I can get the blade centered on the top, but not the bottom. Should that matter? I ask because my blade has started wobbling front to back, and I can't get it to track on the bottom wheel.

[@katzmosestools]

Shouldn't matter on the bottom wheel as long as it stays on there

[@SoHighIFly]

Which part is the gullet?

[@mitchellmartin2394]

what blade is this?

[@xchinx15]

At 7:50: "hang on this isn't a Matt Estlea video..."

[@kennethnielsen3864]

80th.

[@doubledarefan]

I did not see you take the top off your table saw.

[@katzmosestools]

We got a captain correcto over here hahaha

[@tylerbourque100]

You and Ben in the same thumbnail ... *CLICK*

[@justplanebob105]

I have a small bandsaw (Grizzly 803) that I have a terrible time keeping set up. The blade runs off the crown with the most minuscule of adjustment. It runs right by. Is my blade tension too tight? I'm beginning to think I'd be better off with a scroll saw.

[@justplanebob105]

BTW, I love my suizan and dovetail jig. :)

[@katzmosestools]

I would check that your wheel isn't warped and that your tire doesn't need to be replaced. Cheers bud!

[@fladoodel]

Bro let me buy a sheet of this veneer

[@thehusband12]

I don't see anything on his channel related to this video.

[@jcsmith800]

Can someone define what a "gullet" is?.....

[@katzmosestools]

The valley behind the teeth

[@jcsmith800]

@@katzmosestools Thanks, that's what I was assuming, but I still wanted to confirm.

[@dallasstone4416]

How did you not even mention Alex Snodgrass when using his methods for setting up a bandsaw? I love this channel but this is pretty blatant. If anyone wants to see the bandsaw king try searching Alex Snodgrass bandsaw.

[@robertschaeffer5861]

Bun busters must be going out of fashion...