How to Setup BeastX Flybarless Gyro System, Part 2 of 3

[@wickedindian24]

Your setup video was great, it help me alot to understand the beastx and how it works, many thanks, the reason i pin point setup J is because i'm having problem getting blue light at 6 degrees, i can only get red, tried what u said in the video, i can get blue light at about 6.6 degrees, every other setup u explain went very well with me. thanks again.

[@greggormcgrath]

Hello, this was to help understand the idea of what menu J is about, your right the pitch gauge should read 0 when starting.The pitch gauge was not zeroed to the heli from side to side only from front to back so it was about half a deg off. With the pitch gauge reading 0 you then use aileron to reach 6 deg and at that point you should see the blue light. Please let me know if you have any other questions about the video. Greggor A Main Hobbies Tech Support

[@Sandor159]

In states in the manual thart you have to put it at 6 degrees, the color of the led doesn't matter, the 6 degrees is the most important thing. So go back to 6 degrees.

[@61espo]

Great Video !

[@berneicepowell1806]

That's my dad!!!😸😸😸

[@TotalWreck74]

You don't use the rudder stick to adjust the pitch, had me all messed up.

[@wickedindian24]

Ok, in setup J, for the 6 degrees pitch, his gauge was reading 00.7 before he went and get his 6 degrees of pitch, i dont understand, i think if the gauge was at 0 he would have gotten red light, i dont understand this video.

[@doluseb]

Still lost on menu G and subsequently J

[@killerxyt2377]

BHAI PLEASE MERA CHANNEL KO CHEAK KAR LO BIG FAN ..