How to Setup BeastX Flybarless Gyro System, Part 1 of 3

[@louisdeschenes3073]

Thank you for the informative video . Could you confirm in step G is the same for micro beast X as Beast X . Once swash is level and blades at zero . d Don`t touch sticks or change status of servo last used in adjustement . But just hole set up button till H lights up . Thu Lou A+

[@Brunoxtr]

Is this the same BeastX that comes on the Align T-REX 470LM Dominator Super Combo?

[@lucoha]

I can not enter the setup menu (solid LED). I hold the button for 2 or 3 seconds. It's supposed to stop flashing but never does. What can I do to solve this problem? Thank you.

[@countryboymotovlogs926]

This being a setup tutorial a good start forus newbies to flybarless would be tranmitter settings and binding to unit which i assume has to be done before unit setup would start.

[@rochaeliasbr]

Exatamente, estou tentando configurar o Microbeast Plus v4.2 com o rádio Futaba14SG e o receptor R7008SB pela primeira vez. FASSTest-2.4GHz, e não consigo conectar os cabos e não tenho certeza se estão corretos, pois fiz a seguinte conexão: Fiz as conexões conforme abaixo: Eu conectei a bateria no Switch e a outra extremidade do switch no canal SYS do Microbeast Plus V4.2 No Microbeast Plus V4.2, o ELE / DI1, na porta SBUS. Depois de fazer isso, liguei o interruptor pressionando o botão do Microbeast Plus V4.2. 1 - O menu A começa a piscar e o botão Microbeast Plus V4.2 é liberado e a luz piloto começa. 2 - Pressione o botão Microbeast por 2 segundos até que a luz piloto fique vermelha. Depois disso, nada acontece, de acordo com os vídeos, a luz do Menu B fica azul reconhecendo o tipo de receptor, MAS no meu caso isso não acontece. E assim, eu não posso fazer mais nada, e não há uma alma no planeta para mostrar se estou fazendo certo ou dando alguma ideia para acertar os passos. Eu nunca vou usar essa unidade Microbeast Plu V4.2

[@imbroken73]

this thing will not hold the compass on either setting and the tail blows out when hard climb out?

[@weasele1]

how do you adjust the servo in servo centering using the cyclic stick , trim ??? i am ditching the old vbar sensor in my align 700e and would like to instal a beast rx

[@AMain_Hobbies]

Hi Joseph. Our Heli tech has noted that both servo centering, and trim are adjusted during set up, and after test flights. Hope this helps. -Brett

[@dennisdelisle4310]

This may be a stupid question......So is this setup the exact same as the AR7300BX?

[@MrProphet159]

Cool, I'm digging these videos.

[@GrotrianSeiler]

This is SO helpful. Very cool.

[@MarioD]

Very nice video, keep them coming

[@rtoebak76]

I get a tail kick to the right, nose left. And it centers quick. Not tailwag. What could be the problem, i put everything right according to the instruction for the ar7200bx setup. Is the parameter for tail compensation the next step for me? Or should i create a straight throttle curve for constant headspeed. I got the throtte an pitchcurves maybe a little bit to mixed and throttle gives collective at the same time. Meaning maybe the tail is left behind.

[@AMain_Hobbies]

Hi Robert. Our Heli tech added this reply: "The beast does have some pre comp that can be programmed in to attempt to help with that customers issue. It will be a trial and error process - program it, test it, rinse and repeat..but yea he is onto the right idea." Hope that helps. -Brett

[@rtoebak76]

@@AMain_Hobbies Thank you very much for your help and time. I will try the precomp settings.

[@rtoebak76]

@@AMain_Hobbies I just took it outside. Problem solved, i needed a straight throttle curve 0-80-80-80-80. No more tailkick. 0-90-90-90-90 for my trex500 is to much. It's going in a scale fuselage. Pitchcurve set at 20-35-50-75-100. Including throttlecut.

[@AMain_Hobbies]

Great! Glad that helped Robert. -Brett

[@eranbw]

Awesome job!!

[@mpower1001]

Where's part 2

[@Drumvain]

That things a monster!

[@61espo]

Great Stuff!

[@kennyhemi05]

Thank you!

[@simplytrue7930]

please kill the music in these videos. it's an annoying distraction and it's improperly mixed with your voice, ie. it's drowning your voice. thanks!

[@falconrks99]

Yeah I agree! Why do people put on annoying music when giving important instructions. Very good videos though and helpful.

[@supercharged3975]

Brill video.

[@RC-Heli835]

Are you any kin to Jeremy McGrath?

[@jamesward7920]

AR7200BX TREX 550L

[@mpower1001]

Never mind I found it