How to setup Darwin 129 (+GPS Fix)

Accidently reset drone? GPS hardly works? VTX no range? Flashed to 4.4.2 and now are lost?
Feel free to use these settings as a guide to get yourself back on the right track.
BTW the Files for Melodies in bluejay are RTTTL, wasnt sure in the video.
if you are having any problems flashing your darwin129, unplug the GPS module. The usb and GPS are on the same UART so it can't enter DFU mode with the GPS plugged in.

[@ghostechvids]

Thanks for the video. You helped recover my settings and make them better! I appreciate you.

[@johnl5593]

Nice and detailed vid! May I know if I should choose the 'MATEK F405 STD CLONE' target to flash? And which version do you prefer to flash?"

[@chrisadorno424]

I have this Drone on BF 4.3 but when I update to 4.4 or 4.5 i loose all Gyro, Accelerometer & Barometer data. How did you fixed that or do you have any files available like Firmware or CLI or presets saved? What Firmware Target did you use?

[@UnholyNomad]

darwinfpv.com/blogs/news/darwin129-7-long-range-pnp Should be able to use the CLI here. Accelerometer should work by default so I would make sure you are using the firmware target with STDCLONE at the end when your flashing. I havent tried anything higher than 4.4.2 on this drone yet so not sure what the issue is...

[@Max_N.]

I have set of darwin 129 and caddx peanut, but I get jelly in the video

[@UnholyNomad]

How well mounted is your peanut? Make sure you have everything tightened down and double check your PID. Maybe you have some janky filters setup making it fly wonky? I use the supafly 7" I also updated my ESCs to bluejay and turned on bidirectional dshot. My camera is quite stable so I would consider trying those and double checking your drones all screwed together right.

[@Max_N.]

@@UnholyNomad what pwm frequency you use in bluejay?

[@UnholyNomad]

@@Max_N. 48 is what I use

[@rockfordian23]

I updated mine to 4.4.2 and now I have no ports 😢

[@UnholyNomad]

Flashed to stmclone? Might've flashed the wrong firmware

[@rockfordian23]

@@UnholyNomad yeah I used stmclone. But I used uart4 instead of uart2 for elrs. Maybe that's the issue?

[@UnholyNomad]

@@rockfordian23 Don't think it would make your ports disappear... Only thing I can think of is check with the receiver disconnected and if that doesn't work then I'd flash again

[@rockfordian23]

@@UnholyNomad well I tried and still nothing. Hopefully I didn't fry anything. The uarts won't stay selected.

[@UnholyNomad]

@@rockfordian23 that is extremely weird. The Uarts should still show up. Can you tell me exactly what target your using for the firmware update? Keep in mind the GPS is on the same UART as USB TX1 I think. So you might have to unug the GPS when you flash or connect the FC. Not really sure what else I could do to help. Might be worth checking out Joshua Bardwells videos