How to SHIFT Gears in Euro Truck Simulator 2 | H-Shifter manual & Transmission types TUTORIAL

[@Scorpion1995100]

Hey quick advise from a professional who drives big trucks with manual transmission (Double H 18 gears) for a living. Under normal circumstances i usually start (when fully loaded) with gear 2, go up to 4, change gear group and then 5,6,7,8. if i am empty i start on 4 low go up to 5 high and then either 7 low or 6 high and after that onto 8. or else youre shifting way to much. The gear 1 is only there for manouver or when you need much power and not alot of speed.

[@Renekor]

😵‍💫

[@Wolltazar]

@@Renekor exactly my words. however, it was a good advice

[@_Z1PEX_]

i hope i never become a truck driver irl this is too complicated

[@lofwyr5063]

Bicycles have a lot more gears than 12, usually, and people don't really use the very first either, @@_Z1PEX_ Just look at it like a bike and you'll get it.

[@partyflockske]

or only drive automatics :) @@_Z1PEX_

[@survil321]

Tutorials straight from proffesional. I like it.

[@truckparking2139]

kzbin.infoWZuiOaPjdaY?feature=share

[@ňákej_wir]

I know you showed the gears like that for the purpose of the video, but you can skip gears even if you are loaded. It's faster and less hand movement. Also, i recommend to bind the High/low or split to some button on the other side of the wheel than you shifter is, so you can keep your hand on shifter and don't reach for the button as you do and simply do it with other hand while still holding the wheel :D

[@paulhorne390]

Many, many thanks. Just bought a manual truck shifter. Your advice was invaluable. Once again thank you 👍

[@KartikPlays]

It’s always good to move into neutral before selecting the range, it’s optional for the splitter.

[@tony747official]

Noticed that. But because it doesn't do any harm in ets2, I do it like this, it's less hand movement.

[@mclarentech6359]

@@tony747official hey I suggest you start a new series where you do comparison or daily or weekly news from truckersmp and SCS like ap101gaming

[@tommeiner9983]

Both the range and the splitter are "preselect" in real life, so I don't know what you're talking about. You can switch both of them while in gear without any problems.

[@handlesrtwitterdontbelivethem]

@@tommeiner9983 how

[@vilenius187]

@@handlesrtwitterdontbelivethem you can switch the range before shifting and it will change once you depress the clutch. Same with the splitter, say you're driving on 6th gear and you press the splitter, then depress the clutch and bring it up and now you're on 6 1/2 gear

[@mistamixSD]

Very good and informative video, exactly what I was looking for. Thanks!

[@The_ElonMusk]

Every time, when I drive in ets 2 I think, when they will add a normally working kickdown (or overdrive) And now, I can use it Thank you, bro

[@Titanic4]

One thing about Simple Automatic: If the engine shuts down for any reason, the vehicle will brake very hard, regardless of the speed you're driving on. This is especially important when dealing with TruckersMP, since you might brake check someone by accident if the engine dies at very unfortunate moment. For this very reason it's important to make sure that the truck isn't damaged and that you don't run out of fuel while driving.

[@Horikon3]

Hey tony. For h shifting you don’t need 3 pedals. You can do it even with 2 because nowadays there is an automatic clutch feature 😅

[@BlueDomnio777]

@@Horikon3 Hey, thats not tony

[@wakcedout]

This was actually exactly the kind of video I was looking for. I live in America so unless you are a trucker the average transmission type used is automatic. And I do want to get a wheel for this game but because I don't know how to drive manual at all I wasn't sure how the clutch itself would actually work. And this video seemed to show not only how to use it in this game but I'm pretty sure those same principles apply to the real world. Essentially, ets2 and ats using sequnetial manual will teach me how to drive a manual transmission car lol. At 41, never too old to learn something new.

[@MR_LPS]

When I got Logitech G293 with the shifter I didn’t know how to start moving cause I always stalled it but I learned how to start moving by myself. But for all this time I thought I was doing it wrong until I watched this. Thanks Tony

[@mclarentech6359]

When the world needed him he returned❤🌍

[@truckparking2139]

kzbin.infoWZuiOaPjdaY?feature=share

[@schaudirnichtmeinprofilbil2324]

No?

[@mclarentech6359]

Yes he did

[@jeffrypeffry8107]

Do u know why when i use the H shifter the engine won't turn on?

[@bacongaming6094]

Press e on keyboard

[@PhilDiasPJD]

Nice video, however if you dont have a clutch, don't map a button/pedal press and the game will automatically use a clutch for you so you can drive a manual truck with a h-shifter. Regards

[@bokikoki7]

Thank you so much! This helped me a lot. I used to have my wheel set up like how you said but at one point the cable to my wheel died and I stopped using it, recently I got a new cable and just couldn't remember how I had it set up. There was a video I watched but I couldn't find it again. Even though I have a clutch, I prefer the game clutch for me. Thank you so much!

[@nadadegamer9730]

Obrigado, amigo! Vim aos comentários em busca de uma resposta como a sua ajudou demais 🙏

[@Komaticom]

Thanks from Australia. Got the Logitech shifter and find the split option more convenient with skipping gears

[@OzdenOzgun]

If you have a shifter I reccomend you to go to the nearest service and change your transmission to 6-speed. I tried both 12-speed and 6-speed transmissions. Here're the details: 12-speed transmission: + Has 5 levels of retarder. Easier to slow down the truck without service break. + Slightly better with very heavy cargos and climbing the hills. - Very narrow ranges on low gears. Basically you need to shift up almost every second up to 8th or 9th gear. - You need to push the shifter toggle button and press the clutch pedal for the gear changes and it's boring to do it every time. 6-speed transmission + Very easy to use. + Gear ranges are logical. When you slow down to make a sharp turn you sihft down to 2nd gear and it makes all the sense. With a 12-speed transmission 8th or 9th gear is enough. + You don't need to push a toggle button. It's more natural - Has 3 levels of retarder. 5 level is more fun. - Acceleration is not as good as 12-speed transmission on heavy cargos but definitely maximum speed is NOT slower than 12-speed transmission.

[@Johhandania]

THANK YOU. You actually helped me 😭😭

[@Sharkbar_]

Thak you, this is just what I needed.

[@krez1x]

Thank you so much❤

[@hamzarebai1231]

Thank you for this video tutorial. Well done👍🏻❤️❤️

[@GTgaming98]

Very good tutorial tony keep it up

[@jeffrypeffry8107]

Do u know why when i use the H shifter it won't turn on my engine

[@gamerzpalace7592]

Great But plz solve this if the truck have 16/14 gears then how can i change after 12😅

[@jaroslavgedra8557]

Best video mate thanks for that ❤

[@user06220]

Very useful

[@truckparking2139]

kzbin.infoWZuiOaPjdaY?feature=share

[@josefinaalegalis1274]

good video friend thanks for the explanation Could you make a video explaining how to start on very difficult steep climbs or slopes, both in ETS 2 and ATS 2?

[@RyanChainani]

Having a problem on the A7 shifter on ETS2. When i tried to bind the reverse gear(i pressed the shifter on neutral going to reverse), it replaces my 6th gear. Same goes if i bind 6th gear it replaces my Reverse gear bind. I don't know how to fix it.

[@Andy-h3y]

Can we set this up for eaton fuller if we use buttons on the wheel? how?

[@weswheel4834]

Nice video thanks. On the Scania layout that you showed at 6:19, how come they only use 3 of 6 gear positions (particularly why isn't the top middle position used)? Is it just easier to drive that way? Just wondered, thanks.

[@yamen857]

Well the setup he used is a bit unrealistic, the real life Scania 12 speed is an automatic, doesn't come in manual. but there is the 12+2 transmission which does come in manual, and that uses 5 positions, reverse, the first 2 gears are crawler gears that are very low ratio so you can have easy starts on uphills if you are carrying heavy weight, then the rest are normal driving gears like he showed. that's how the Scania engineers made it, Volvo is similar but diffirent layout

[@sgxbot]

because its easier to understand if you have 6 gears that are split in the middle then 4 split in 3 or 8 where 4 are split and the other 4 are not. by doing it like this they made it so you have 3 positions with 2 gears on every position and each gear being split into 2. forcing the 4th one in there would make the shifter needlessly complicated.

[@WESAM.WALEEDY]

You are super awesome ❤

[@FTamino]

Could you show us how you record the first person stuff with the wheel

[@cichi_nandi]

frumos tutorial, dar acuma asa ca idee de la minutul 4:00 pana la 4:52, cand ii dai drumul la ambeaj smucesti camionul ala daca ar fi real :) ii dai drumul prea brusc, doar la turometru ma uit si imi dau seama, acuma am zis ca idee fiecare joaca cum vrea :) ori cum frumos clip si bafta in continuare pe drumul vietii la truckers mp :)

[@tony747official]

Bruschez doar pana bite point. Ai condus in realitate?

[@cichi_nandi]

@@tony747official desigur ca da, altfel nu ziceam nimic, ori cum nu am zis-o de rau, a fost asa ca intre " colegi " apreciezi fiecare clip pe care il faci, imi pare rau daca a sunat ceva gresit! Te-am si vazut in joc de cateva ori. Face un content foarte amuzant si misto, chiar imi pare rau daca s-a inteles ceva gresit. Mult succes la ceea ce faci ! Toate cele bune colegu 😁

[@omerbalbakan394]

Thank you

[@olaffinn1]

Hi Tony, i still have a question about when you should use L or H gears. Whats the difference?

[@dreamerko]

How do I engage reverse on the lever if I don't have R there?

[@afh._76]

How do I change gear to R please ❤

[@Dj-liamp]

I noticed your shifter is a 6 speed and you used up all of theam to shift up how do you go in reverse

[@yamen857]

On my Logitech g920 shifter it also has 6 positions and I use up all of them, but on the g920 shifter there is a 7th position for reverse, to go into the 7th position you push down the gear stick them put it in the 6th gear position, that will put it in reverse. It's just like the Nissan 350z manual I think

[@jeffrypeffry8107]

​@@yamen857 but what if u don't have 7th positon i use the g29

[@yamen857]

@@jeffrypeffry8107 g29 has the same shifter. Search how to put g29 shifter in reverse on youtube

[@TundeEszlari]

The video was amazing.

[@Eliotouille]

Hey Tony ! Thank you for this tutorial and uh I saw once that you drifted without snow, how ?

[@vineshparbhudayal792]

Tony, what specs do you have in your PC?

[@xhoho6927]

Thanks bro

[@tumate45]

Funny how the game forced me to use range splitter, because it put me in a scania for a heavy haul and the first two gears were C1 and C2, then 1-4, and if I jumped to the other range the truck got into 11 or 12. That was a miserable experience until I setup the realistic shifter option and suddenly I found the other gear between 4 and 11. After that I had so much fun with the range splitter setup, dont even want to go back now

[@Meyvesiz_kasap]

thanks loot bro for your help!! Now can I drive my truck on 12th shift.

[@Hans_Ft]

Why does mine start with c1 and so on? I mean, I got used to it with 2 toggles but how do you get 1to6 instead of my c1 to 4 then 5 to10 and thennnn 11 and 12

[@glarenova]

You've probably already fixed it by now but just incase I'll say it's because you have 12 + 2 speeds and C1,C2 and the +2 speeds. Just change to a normal 12.

[@Hans_Ft]

@@glarenova yea. I also got used to ATS 18 gear XD

[@RikiCatte]

hi, thanks fir the video, which is your key binding for reverse? (i also have pxn a7)

[@Victortap1]

Are you playing on truckersmp? Or what servers?

[@yws152]

could you do a tutorial for your monitor set up?

[@chrishines6048]

At the time of this comment I'm currently installing a custom made motor ( designed and engineered by me ) into my wheel and it's still in bits so I'm using my keyboard and when I play ets2 on my keyboard I tend to use real automatic as I feel more comfortable with it but when I use my wheel I use H-shifter

[@BigMeechEJ25]

Thats awesome good luck on your project. Are you installing a motor for force feedback?

[@chrishines6048]

@@BigMeechEJ25 yes

[@evicol2117]

from what I know, irl you should start in 2nd or 3rd if you dont have a heavy load

[@tony747official]

Sure, I mentioned that, but I wanted to go through all the gears to showcase each type

[@callum_b0486]

what steering wheel, pedals, and shifter do you use?

[@Matty27]

The link is in description

[@bacongaming6094]

Is sequinal when you have 2 pedals?

[@toby.elmiger]

Hey I recently brought the Logitech force shifter and it’s not connecting or showing up in Logitech g hub did this happen to you or do you know anyway to fix this?

[@ab0tube]

I wanna know how do you hide the stearing on the truck and show ur

[@ronweanysr]

Love you bro

[@itsmik-m6b]

Does the pxn v10 shifter work with any wheel or do u have to use te pxn v10 with it?

[@Foxy_225]

I got a question on how to repair one thing. Even tho I try to go straight my truck turns in one or the other direction. Idk how it happened but its really annoying. It also started turning really weird. Please help

[@VipapkStudiosOfficial]

Are you Charles Leclerc? ;)

[@MFox-t4t]

Hi man, I'm really stuck because I have H-shifter and iv the clutch with 6 gears but the truck is stuck in neutral and it's not seeing I'm putting truck into first gear and gently pressing the accelerator

[@weltmeister]

I like this but your clutch seems to have springs and it doesn't seem as stiff as a teal clutch so if I get a setup like yours can I change the springs in the pedals?

[@tony747official]

The stiffness is adjustable. I like them lighter.

[@MikaTarkela]

Am I supposed to press down the clutch when using the toggle switch keybind? When I press the toggle nothing seems to happen and the fastest I can go is only 35km/h :( Edit: I realized I need to hold the toggle button down the whole time when I'm changing to gear 7+. A bit too tricky for my taste damn it.

[@loverlun885]

Hi, please help me out as I can't get the moza h-shifter to work like you did here. Thank you.

[@generalgenecide]

We want to seeing flying cars, trucks and buses!

[@deroluz588]

i have 3 pedals, the exact gear shifter as you but when i try to bind my gear number 3 it is the same bind as the accelerator and gear 5 and 6 is the same bind. please help me bro. im on sequenuential for now

[@bstikkel]

Thanks for you explaination video. I have two questions, actually now. 1. While togling I thought means switching between two settings, there are two toggle buttons available. How does one switch back to the first 6 gearlevels. Again pressing Toggle 1.? So what for is the Togle 2 button? 2. Do I understand correct, one does always only connect only the first 6 gearbuttons and the reversegear button? Thanks for your reply, if possible.

[@Comic_Saens]

In Range or Split mode, you only need 1 toggle to swap between the set of low number gears and high number gears (or even gears and odd gears). In Scania 12+2 mode, 1 toggle swaps between the low number gears and high number gears just like before, the second toggle allows you to swap between the L and H gears within a single number. 1 toggle swaps between the gear numbers, the other swaps between the gear letters. To get from 1L to 1H you'd only hit 1 toggle, to get from 3H to 4H you'd do the other toggle, to get from 3H to 4L, you'd toggle both. AFAIK the reverse gear is on one of the layouts in Range and Split, and is in both layouts in 12+2.

[@chegames1]

Never heard about that game. so you play and show video of it for last 5 years, wow you are veteran bro

[@JaTeam4fan]

Nice

[@Takumi864v2]

2:29 Eaton 13 and 10 are swapped

[@OFC_SHELDON-BUSOLOGÍA_519]

hi, i am new here, i play Ets2, o Driving good, my truck Is tuning

[@sibisiddharth4367]

You explained perfectly but I don't have driving kit😅 , ln future I will buy this, l will definitely reffer your video👍❤️.

[@wakcedout]

You too lol. Yea after watching this I feel like I could hop into a manual trans car and drive it lol

[@NEKIT_GAMING]

Best!

[@ThatsPerty]

How would you slow down to a halt with clutch? Is it as simple as before? Or does it require the use of clutch and gears?

[@sgxbot]

you can engine brake by changing down gears or you just use the retarder. if just wanting to come to a hold you can just use the brake. though you would make the engine turn off. to avoid that just press the clutch. and if you dont want to hold the clutch while braking just press the clutch put the gearbox in neutral and brake normally

[@jomardumanat2394]

Do you have any suggestion if what compatible usb shifter knob to our pxn v10 shifter? Sample is almar skrs?

[@1xrakanx1]

Thx bro So i need to start with shift 2 gear to start moving? Cuz when i start 1 > 2 > 3 etc Truck sound like hnnnnnnnnnnnnnn helllllp 😅

[@sgxbot]

you can skip gears as you see fit. if you are empty starting in 4th gear is fine. if you have cargo loaded it depens on how heavy it is and if you are on an incline. most of the time you can start in 2nd gear. 1st gear is only needed when starting on hills or if you want to maneuvre slowly

[@Zervoy]

Gear 1 and 2 detects as one how can i fix that? it detects it when i Put my shifter middle left where no gear is?

[@VRRitchie21]

my truck keeps falling off everytime a try to ride

[@RVXbeats]

Pls help, i have the pxn v9, when i change gears and go to 6th the max speed is 35kmh please idk how to fix it

[@gabriellahalasz9458]

Can you please send or show/describe your graphics settings? Thank you in advance and for this fantastic video. I use a Thrustmaster TX Leather Edition wheel. ❤❤💕💕

[@floryanhd3444]

Wasn't it with the H-Shifter that when you stand and you're in gear and don't press the clutch the truck stalls?

[@dafferdonk]

Yes

[@tony747official]

Nope, sequential was without clutch

[@floryanhd3444]

@@tony747official I mean with the H-Shifter option of course

[@tommeiner9983]

Of course it will stall if you're in gear and you stop lol

[@teggsy2165]

Odd no simple toggle from low to high when i drove Years ago,Mecedes selected high and low by just going side to side across neutral,Scania had a button under the gear knob both where just a once only toggle switch example 6 high 6 low but to have to toggle every shift is just horrible as shown here but yes it works i guess.

[@welz03]

How about the settings for above 12 gears? I believe there are trucks in ets2 that has 18 gears?

[@destrobe4290]

The transmission with the most gears in ETS is the 16-speed, it has its own shifter layout in the controls section. Gearboxes with more than 16 speeds are from mods with their own downloadable layout for you to use. Cheers ;)

[@welz03]

@@destrobe4290 thanks for this. but how can we set it up? can't find this from the controls section

[@destrobe4290]

@@welz03 If you want the 16-speed, at 5:57 where he’s selecting the H-shifter layout you can scroll down for more options it’s called “ZF 16 speeds”.

[@welz03]

@@destrobe4290 thanks bro!

[@yamen857]

ATS has 18 speeds, ets 2 has at most 16 speeds. The 18 speeds in ATS have Thier own layout in the settings.

[@m11zzaXD]

I need an idiots on the road video plsss!!

[@peye0unu]

whats the settings for when you are in gear and release clutch and engine dies?

[@chrisbernardo2877]

have u found the answer for this?

[@peye0unu]

NO! i cant figure out about engine break. i remember in last version of games i could use this. so if i was in 6 gear and i but in 4 gear the speed was decreasing @@chrisbernardo2877

[@sgxbot]

then you just released the clutch to fast...

[@ismailyazar6200]

the same steering wheel that I use, the best thing is that it has a retracting feature

[@jeffrypeffry8107]

How do u go reverse if there only 6 lines in ur gears?

[@ismailyazar6200]

@@jeffrypeffry8107 we don't go back we go back🤣😂😁

[@wf6188_meggy]

I use Real-Automatic when I use the mouse to drive. Then, I have parked my truck and should use gear to N will be safe.

[@peoplegameplays.156]

Where is the link for the h shifter

[@tonisamuray8575]

Ești Român?

[@maximjeske7627]

What should i do when i have joy Brake but when in Not make Gas it automaticly brake ?

[@lynic-0091]

I cant switch to 7 no matter what I try :( I bound the shift toggle buttons over and over, but nothing changes, everything im on gear 6, I press the toggle 1 button, then switch to gear 7 but nope, its gear 1.... i dont understand what im doing wrong. Im using the logitech g29 wheel and shifter

[@salemgraves-w8n]

Any tips for downshifting and stopping quickly? The amount of times I rear end someone while driving manual is embarrassing xD

[@tommeiner9983]

How does using a manual have any effect on your braking? lol

[@salemgraves-w8n]

@@tommeiner9983 Down shifting

[@tommeiner9983]

@@salemgraves-w8n If you've ever driven a car you know you don't have to shift down through the gears when you're braking for a stop... Let the rpm fall to idle in the gear you're currently in, then put it into neutral and just stop lol.

[@salemgraves-w8n]

@@tommeiner9983 I guess I must not have known that since I asked the question.

[@yamen857]

Just hold the clutch when you're braking then downshift to whatever gear you need

[@davidpribanovic787]

Tony can be driver instructor

[@MiryzengPrimerpc]

Donde puedo encontrar esos pedales canbio se ven mala calidad son baratos?

[@fanykamionak]

Jak si nastavím abych řadil přes spojku

[@von-h9y]

can you please do a tutorial on how you get your wheel cam to have no background

[@rareslogiganaugustin7752]

Ești roman

[@dragoni7832]

Is there some way I can make it so that I don't have to shift 12 but 6 gears and still get to max speed ?

[@tony747official]

Yes, some trucks have the option to buy (when configuring) a 6 speed transmission on some trucks. But it's not great when you have 20 tons. My recommendation is to use the 12 speed and skip gears when empty (4-6-8-10-11-12) and shift normally when having full load.

[@TackleTheDog]

What I do when im empty with a higher hp truck is i start in 3rd, go 6, 9, 11, 12. Then if i encounter hills I add in gears as I go. when i’ve got about 20t on then i start 1, 2, 4, 6 so on until 10, 11, 12

[@dragoni7832]

Thanks a lot!

[@tommeiner9983]

why would you want to do that?

[@Riskw-mk1lo]

@@TackleTheDog nice :)

[@SpixxSnipe]

and where is toggle shifter bind'

[@soullesswolf1316]

next: how to mount the steering wheel onto the truck one (i know greenscreen but HOW) :P

[@boskorokvic7908]

what if i dont want to have 12 gears? can i do only 6 of them with shifter?

[@destrobe4290]

If you use a 6-speed trans on your truck, select the range shifter layout then your shifter will behave like a car with 6 gears. Happy trucking ;)

[@tommeiner9983]

Watch the video. 12 gear are accessed by using buttons for the range and splitter. A 12 speed transmission is actually just a 3 speed.

[@Ronnaill]

C H E E S E

[@22o2]

My gear not changing from neutral.. How to fix?

[@Titanic4]

If you have assigned clutch and you're using H-shifter pattern, press and hold the clutch pedal while changing gear. At the moment, it's possible to preselect the gear. The game will switch the gear once you press the clutch pedal. In case of real automatic, switch the shifter to "Drive", or "Reverse" position to get out of neutral. In case of simple automatic and you're completely stationary, if you're in reverse gear, stop holding the acceleration key, then press it again to move forward. If you're in forward gear and you want to go into reverse, do the same thing in relation to the key used for applying the brake. Make sure that game's developer console is not open as it will disable all controls while the console window is open, regardless of the controller type.

[@BoX5aled]

I have a G29 gear shifter how do i shift into 7 and above?

[@sgxbot]

he said that in the video you need to bind the toggles and then use them after the 6th gear and then you have 7-12

[@g31real]

The Kids in the front: 6 Gears, 1 Clutch Pedal, No Toggle Kids in the middle: 12 Gears, 1 Clutch Pedal, 1 Toggle kids in the back: 24 Gears, 5 Clutch Pedals, 17 Toggles, 13 Reverse Gears, 4 Copies of ETS 3 Everyone who is reading this, please have a nice day ❤

[@iovugabi]

1:28 1:31 1:32 1:32 1:33 1:33