How to shim your MSD DynaForce Starter

Follow along as we show you how to properly shim your DynaForce Starter.

[@justonemorecar4341]

Steve Magnante!!!!!! Love you on Barrett-Jackson!!!!! A true human, living, walking automobile encyclopedia!!!!

[@petejoseph8257]

Very informative, thank you.

[@pauldhiman8369]

Good vid steve👍🏽

[@thisguysnameismatt4460]

I have a ford and generally they dont need shimming (as far as factory replacement) however, i put an after market flex plate on and the starter gear "at rest" is actually even with the ring gear (like a typical gear). Obviously its to close, literally the 1/2" of the flexplate to close. I used washers on both sides till it seemed far enough away to engage the ring gear 1/2 -2/3 of the thickness. Later i may just get a solid plate to replace the washers.

[@vdrivevideo]

Great video.

[@ghulabkhan762]

Good job

[@stevenbanks1050]

i have the MSD starter #50951 when I mounted the starter it is hitting the fly wheel not the teeth big block chevy , I have different mounting holes wondering if this is the problem.

[@michaelvenable272]

Thank you

[@dragosutalo579]

A+

[@randycarman897]

I had to use over 1/8 inch of shims to move pinion away from flexplate, to keep it from rubbing on my 350 chevy.

[@Hans1992NSX]

I have a very similar starter for my Chevy Small Block Mercruiser in my boat. I've tried all the shims and believe I am actually too far away from the flywheel. I am believing that I actually need to remove metal from the starter mounting block (not shim it away). Any thoughts?

[@tignob]

I feel like I have to take a file to all my starters. I'm going on the 5th remaned starter this year for my 454.

[@frankbowen]

Does not really show the details of putting the shims in and remeasuring. It would have been interesting to see the geometry after he did the shims. Also he did not measure the distance from the ring gear to the starter gear. the instructions call for 1/16th of an inch. Putting the shims in would have altered this. This instructional video goes down as, "well you get the idea". In that case it was helpful, thanks.

[@rusoperformancerd5306]

One question when I turn it on, it sounds a lot and I put it in new because I bought it new cheaply, that's why what I saw when it arrived was that the connector where the ignition positive goes in the starter motor was broken, what would it be, I don't know what's happening or not. It's original I don't understand what it could be I'm crazy now and the starter motor is new I don't know if it's because it's not the original but it slips and it sounds loud and takes a while to start crashing the bendix help me

[@stevenbanks1050]

if I do mounted the starter in the other mounting holes the starter will not be line up with the block, will be hanging over is that all right to do.

[@jamesjordan7460]

You sir are a idiot and should not be working on engines, probably wrong starter.

[@colt5189]

Are you related to the guy from Bar Rescue?

[@jessesenteno1723]

I've done everything the video said to do but my 283 still gets that clanking sound when starting? .

[@TheDriver454]

have you checked the flexplate?..you know..for damaged teeth or if it´s warped (sorry if my english is a bit off.. :) )

[@jessesenteno1723]

Yeah it was new. But its starting to get a little damage from the clanking.

[@joshuagarvey9362]

I have a scatter shield.I am screwed.

[@DorianMariusGray]

How do you take the mounting block off? I cannot find any instructions?

[@DorianMariusGray]

@@jamesjordan7460 you sir are a douche and should not pretend you have any automotive knowledge. When you are needing to make adjustments on anything you just don’t accept that something cannot be done. You obviously have never done custom work or had to modify anything in your life. Oh and BTW I figured it out bc you know I have a brain unlike some.

[@randycarman897]

2 setscrews on one side of aluminum block and 1 on the other

[@_greybones925]

4th video none show how the shims are installed between starter and motor ,guess I should learn all of the motor mumbo jumbo before watching ,then again if I knew all of that I probably wouldn't be watching this .

[@scottydntno]

I followed these steps accordingly, and the starter is still destroying the fly wheel. Thank Goodness then starter teeth are harder. 🤦🏽‍♂️