I don't comment often. THIS WAS THE BEST TUTORIAL I HAVE EVER SEEN FOR PERF BOARDS.
@corneliuzuzu57784 жыл бұрын
Exactly my thoughts!
@vincentmoon99192 жыл бұрын
Same
@firstgear11382 Жыл бұрын
I've watchted this video years ago and I still enjoy watching it 👍
@Alx2672 Жыл бұрын
No smoke, burnt holes, everything stuck, no blobs, just the perfect amount. Great video.
@Nebulorum2 жыл бұрын
I saw this video years ago when I was beginning and the beauty of the technique stuck with me. Today I build some small breakouts based on what I remembered and was surety happy, But had to see this again, I now appreciate it even more. Best soldering for this kind of work out there. thanks a lot, on to more practice.
@JedrekVRoscoe3 жыл бұрын
I just spent most of today absolutely struggling to create trace lines with lead-free solder, and it was an absolute nightmare. Thank you for this!
@djmj12714 Жыл бұрын
I pretty much threw in the towel on lead-free solder. IMHO, 60/40 rosin flux core is the way to go!
@smooooth_ Жыл бұрын
This is such a great method for making traces on perfboard. Way cleaner and easier than any way I had tried doing it before. Got a chance to use it when I first saw this and it worked so well
@Alx2672 Жыл бұрын
All the other videos show you how to solder components, but none show you how to make connections between. Great job. Thank you.
@BernhardHofmann6 жыл бұрын
This is excellent! I'm new to this and I was looking for tips on how to solder on a perfboard. I saw quite a few videos before I found this gem. This is exactly what I was looking for. Such a tidy board, so neatly done with attention to detail. Wunderbar, toll gemacht!
@la77y85 жыл бұрын
I wish I'd seen this video 20 years ago.
@TheThickBloke5 жыл бұрын
As many have already commented, thank you so much for taking the time to demonstrate your method of laying out your traces. Very helpful :-)
@Aussie50InspiredDavidZ2 жыл бұрын
Watching you solder helps me relax and puts me to sleep. And that's a great thing when I worry and can't sleep at night. It's relaxing. By the way. THANK YOU. BEST single sided board soldering pcb hands down!!!
@estring693 жыл бұрын
So much craft and finesse to it. I never would have thought that. These prototype videos are so helpful.
@djmj12714 Жыл бұрын
I was thinking the same thing when he was wrapping the wire around the holes with a jewelers screwdriver, making it ready for subsequent connections!
@VitorVulcanoRossi5 жыл бұрын
This is the cleanest method I've seen on youtube. Look forward to trying it!
@francisli88075 жыл бұрын
I have diy ele project for 40yrs and this is the first time I see making a PCB in this way. Interesting.
@optimist551167 жыл бұрын
Thank you. An excellent and very thorough tutorial on basic prototyping with these boards. I used to work in electronics (40 years ago) before these were available. Great effort!
@davidkennedy25556 жыл бұрын
Thanks for this... taught me several things I needed to know... specifically, how to lay out the wires for connections instead of using a board that was already laid out. SInce I am a newb at this, I had not yet thought of this. Thank you!
@sarahmurphy54647 жыл бұрын
Thank you so much for a detailed and well presented lesson! Learned so much.
@reneharrison15813 жыл бұрын
instaBlaster...
@IdShift4 жыл бұрын
The Bob Ross of circuit building. Look at those happy little ICs...
@Berred4 жыл бұрын
Thank you, HIHIHIHI
@davidgood840 Жыл бұрын
OK, now that was cool! I've made many, many perf board prototypes, but never thought to make "traces" like this! I usually would bend part legs and jump wires after the parts were soldered on. Looking forward to my next board using these techniques, especially the screwdriver tip for making perfect round bends!
@ElektrischInkorrekt4 жыл бұрын
YAY! :D Du bist die erste Person, der ich auf KZbin beim Löten zugeschaut haben, die die THT-Bauteile VOR dem verlöten kürzt. (Ich schaue verhältnismäßig vielen Elektronik-Kanälen zu, z.B. EEV-Blog, Elektroniklabor, Kondensatorschaden, Zerobrain, BigCliveDotCom, um mal einige davon zu nennen...) Das einzige, wo du meiner Meinung nach noch dran arbeiten könntest, wäre die Verdrahtung. So eine Verdrahtung mit Silberdraht hält auch noch ziemlich gut, wenn man ca. 4-5 Löcher Abstand zwischen zwei Lötpunkten lässt. Somit reduzierst du zum einen deinen Lötzinnverbrauch und zum anderen sieht (Meiner Meinung nach) die Platine dadurch viel schöner aus. Außerdem würde es dadurch nicht so "hingerotzt" aussehen. Wenn ich ehrlich bin, sieht das Endergebnis aus, als ob man im Nachhinein noch etwas korrigieren wollte, mit Gewalt den Draht hingebogen hat und am Ende mit dem Lötkolben "gebatzt" hat. (Wobei mir keine kalten Lötstellen aufgefallen sind...) Besser (/visuell ansprechender) wäre es gewesen, wenn du für jede Strecke (ohne Biegungen) einen eigenen Draht genommen hättest und diesen links oder rechts an den Bauteilen vorbeigeführt hättest(natürlich ungebogen). Aber das Kürzen der Bauteile vor dem Verlöten ist wirklich das Highlight des Videos :D :D :D :D :D
@Berred4 жыл бұрын
Danke für das Kompliment, ich habe das so früher in der Ausbildung als Elektroniker gelernt. Da hat man auch drauf geschaut, ob auch wirklich je einzelne Lötstelle rund und schön aussieht und dass man zwischen den Lötstellen den Draht sieht, der in diesem Fall übrigens kein Silberdraht, sondern ein verzinnter Kupferdraht ist. Aber in der Tat muss man nicht jedes Pad löten, da reicht jeder dritte oder so. War seinerzeit eher auch als Lötübung gedacht und somit kommt es bei mir auch nicht zu kalten Lötstellen. :-) Das Kürzen der Beine wird in einer Fertigung auch so gemacht (außer im Chinesenland), um die Lötstelle nicht zu verletzen und eine sichere Verbindung zu gewährleisten.
@ElektrischInkorrekt4 жыл бұрын
@@Berred Dito - leider dauert es bei mir noch, bis ich die T1-Zwischenprüfung machen kann (wurde auf unbekannt verschoben...). Welche Elektroniker-AB hast du genau gemacht? E. für Betriebstechnik macht das m.W. nicht, der E. für Energie- und Gebäudetechnik m.W. auch nicht, und der E. für Automatisierungstechnik ebensowenig. Ich hab das halt durch, weil ich Elektroniker für Geräte und Systeme i.A. bin. Wobei dort die Schwierigkeiten eher in anderen Bereichen liegen. Ich finde es z.B. ziemlich schwer, SMD-Platinen per Hand zu bestücken (Natürlich, wenn man Lötpaste verwendet, das 0402-SMD-Arrays oder kleinere Bauteile sind und diese sich bei der kleinsten Berührung um 1mm verrücken...), wobei die Schwierigkeit exponentiell zur Anzahl der SMD-Bauelemente steigt.
@krjohnson294 жыл бұрын
Just got my board for a rather ambitious project and realized that I didn't know how to properly use it. This looks so much easier than what I was planning on doing! Thank you so much!!!
@krjohnson294 жыл бұрын
So I just finished soldering up the traces on my first board. It isn't exactly a walk in the park, but I made it through in about 4-5 hours. The board I am making is just a touch larger than the one in the tutorial (16x24), but is packed with about 4x the components. Some issues I had: 1) Not as easy to straighten the wire for me as shown in the video. But after fiddling with it for a bit I was able to get straight enough sections to use. 2) I didn't have a small Philips head screwdriver, so I had to use my small flat head to try to make the loops around the holes. Looks kinda messy, and a bit more work, but I managed. Will definitely think about getting a Philips, or maybe using a small nail for the next one!3) I stupidly mis-soldered about 4-5 holes. All but one of them de-soldered with the pump fairly easily. But one of them was a complete bear! I probably spent 20% of my total time trying to desolder this one hole. I think the difference might have been that the one that was hard had a wire going around it, maybe making it hard to make a seal with the pump. I would recommend desoldering any errant holes before getting a wire anywhere near. Unfortunately, I realized my mistake too late and had to try with the wire in place...
@MantisRay8617 жыл бұрын
Bobby Dazzler. I've never seen traces laid out like that. So clean. That's right nice!
@faridwakim7 жыл бұрын
MantisRay861 i spot an eevblog fan here. Well i guess bob's your uncle.
@aiden3595 жыл бұрын
Just finished a small project with one of these boards in school. I wish I had seen this before haha
@hong18s3 жыл бұрын
This is a one of the best tutorial for soldering on perf board
@djmj12714 Жыл бұрын
This is a great tutorial, and a refresher! I'm not new to this, but have been out of hobbyist electronics for several years, only just recently getting back into it. Clearly, things have come a long way from the wire-wrap techniques that I used. Cheers!
@viktorbozicevic62196 жыл бұрын
Appreciate the patience and tidiness of the whole soldering process, keep it up man!
@Kimchi_Studios3 жыл бұрын
Soldering ASMR. I learned a lot thanks!
@clattereffect5 жыл бұрын
nice vid on soldering grid PCB, I have a bunch of grid PCB's that I wanted to get started on and your vid provides good tips and instructions. A++
@remotecoderz5 жыл бұрын
Thank you for this video. I was searching youtube for a way to solder the "under side" of a perfboard to make the connections. You've brilliantly showed me how I need to approach development of my projects so I don't have to toss out all the perfboard I have.
@knark6665 жыл бұрын
I never knew you could slide the solder wick like that. Great video!
@docsketchy3 жыл бұрын
Holy crap! In the time it took this guy to solder on all those wires, I could have printed, transferred, etched, drilled, tinned, stuffed, and tested a real PCB. (That's why I'm DOCTOR Sketch-n-Etch.)
@iramkhan97483 жыл бұрын
36 min in to understand the significance behind this video. Solid work
@EarlWallaceNYC3 жыл бұрын
I like your disciplined approach. And, I will use some of your techniques. Thanks for the video.
@ryanfranz67153 жыл бұрын
Two things I want to see this guy do: 1. How would you cross one wire over another on the back side? 2. How would you re-attach a broken pin? I ask because I have to cross some wires over each other on the back side, and have some broken pins. Great video btw.
@Berred3 жыл бұрын
1. For a cross wire you can use the other side using the holes (where no components is attached). 2. Its usually not possible to re-attach a broken pad, too difficult.
@ryanfranz67153 жыл бұрын
@@Berred Thanks for the reply! And such is my experience with question 2, but this at least gives me peace of mind.
@junestorm5 жыл бұрын
Awesome tutorial. Best video on single hole perfboard soldering I have ever seen!
@margmargou33294 жыл бұрын
Your video and "Veroroute" are just great! Thank You both!
@KE0RM Жыл бұрын
This is exactly what I was looking for. Thank you for this!
@umarchaudhary69104 жыл бұрын
do yourself a favor and watch at 2x speed. good luck out there future builders
@tonysicily26873 жыл бұрын
EXCELLENT, you make it seem like even I might have a chance. Thank you
2 жыл бұрын
Dude... you are the man!! And a soldering machine....
@awjaaa Жыл бұрын
Best hacker ASMR evar.
@ilierazvan54854 жыл бұрын
Simply BEAUTIFUL !
@kaoshavoc6 жыл бұрын
You just taught me a lot when it comes govmaking boards. Thx. :)
@monikah123457 жыл бұрын
Great technique, thanks!
@karguy17205 жыл бұрын
Thank you for posting this lesson. I am just starting to make circuit boards, and this will be most helpful.
@chokkan7 Жыл бұрын
Very nicely done tutorial; thank you for posting this.
@alvarocoronado58426 жыл бұрын
such a beautiful technique
@aske16024 жыл бұрын
This has helped me so much.
@todortodorov1183 жыл бұрын
Cool technique mate!
@rascalnicough73763 жыл бұрын
I really enjoyed this video. Relaxing and informative -- thank you for sharing. Several other circuit builders I've watched and read recommend inserting low-height components into the board first and using their leads to form the traces, but your approach is to form the traces from wire before adding components. Using component leads to form traces seems economical but your approach feels more organized and structured. Do you have any feelings on the other approach or thoughts on why you create traces from wire first?
@Berred3 жыл бұрын
I ve learnd this in the 80th. The advantage of this method is that you can lay the board flat on the table to solder the connections. Besides, it usually looks better.
@russellbloomfield-Luck4 жыл бұрын
So satisfying to watch
@massimomelodia36702 жыл бұрын
Great !! Thanks for info regards the wire !!!! 👍👍👍👍👍👍👍👍👍👍👍.
@upensharma23633 жыл бұрын
It was really nice and tidy work also I was looking for such type finished work. Great work.
@edgeeffect6 жыл бұрын
This looks like a good way to do things. I've used strip-board mein ganzes leben lang and it's taken me "too long" to realise how to get the best out of grid-board. I've seen a lot of American videos where they suggest using the component leads to make the solder-side connections but this makes the board hard to repair and modify. But this technique... you seem to almost be making a copy of a PCB with wires and the grid... looks like it would be ganz besser... I will try it again on my next small project. Thanks.
@Penfold84 жыл бұрын
An easier technique for bending pins on an IC is to lie the chip on it's side on a table and gently push to a perpendicular position. Larger ICs is where this technique comes in handy.
@billybbob182 жыл бұрын
Nice technique! If I need to make more than one, then I'll just order pre-made PCBs.
@javierferrer46342 жыл бұрын
Excellent video! Thank you for sharing
@vizionthing6 жыл бұрын
Very good ... still helping people in 2018
@legohexman28585 жыл бұрын
And 2019
@carlberger94234 жыл бұрын
Great tutorial. I did notice that both the 1N4148 Diodes were in backward up to 38:11, then at 38:21 they were not backward anymore!
@jannis68414 жыл бұрын
Nope. He just turned the PCB 😂
@carlberger94234 жыл бұрын
@@jannis6841 Look at the Cathode stripes. Compare the stripe positions between the 1N4148 and the 1N4007 near the PWR connector. At 38:11 the 1N4148 Diodes are backward!
@tranluan93914 жыл бұрын
So great tutorial. I learn a lot from it. I'm learning arduino and I want to soder a board on the prototying board like this. Thank for sharing
@GaryMcKinnonUFO4 жыл бұрын
Very helpful, thanks for taking the time to share.
@Dosbomber6 жыл бұрын
Interesting technique.. I'll have to add it to my repertoire.
@denizsevinc9334 Жыл бұрын
Excellent !
@MatsAndersson4 жыл бұрын
This is such a great video. Thank you.
@user-uv2gu8wm6h4 жыл бұрын
4:12 What should u ask in the shop for this wire... If we say a bridge wire... For PCB..is it fine..I really don't know...
@Yinte_Klop_Blunt6664 жыл бұрын
It's the leads of the components.
@user-uv2gu8wm6h4 жыл бұрын
@@Yinte_Klop_Blunt666 thanks
@christheother90884 жыл бұрын
I find its pretty easy to strip insulation off my regular hookup wire, then stretch the wire as he shows here.
@BenjaminFrock4 жыл бұрын
really enjoyed this video. Thank you
@desiarvela15053 жыл бұрын
I like this work
@svem19728 ай бұрын
Excellent and honestly I am going to follow your steps. Basically I am software architect and I have huge passion of building circuits for amplifiers however to get kick off I have to make it on Vero board to set prototype and if testing is successfully would make the same on pcb. However have few doubts to build tracks when it co.es on Vero board how to follow if you could help would be great. For ex. In pcb design we give track measurement so that copper lead will be mask and give good results for the circuits. Howevere here qhen us 0.3mm wire for connecting dots may lead pro lems while using high rated power amp compone ts in that case what should do , plz suggest.
@icollided7 ай бұрын
Awesome video. Very helpful. How did you keep the board from sliding around? It seems to magically stay in the marks the whole time.
@maexso89815 жыл бұрын
Hi, welches Programm hast Du für die optische Erstellung des Platinenlayouts verwendet ? Vielen Dank vorab. Gruß Max
@Berred5 жыл бұрын
Eagle
@necoisidois75707 жыл бұрын
Terrific! Thank you..
@patrickdelafon86183 жыл бұрын
Excellent. Thank you.
@ColinToal3 жыл бұрын
Nicely done.
@mrmshifan4 жыл бұрын
That was so cool 👍 Thank you.
@josephciaravino41154 жыл бұрын
This was so cool!
@RoamingAdhocrat3 жыл бұрын
10 minutes in and really enjoying this so far. But how do you plan the paths? You're confidently placing wires but I don't know how you decided in advance where they need to go. I want to connect a seven-segment display, rotary encoder, and servo socket to a microcontroller. So, I've got about 15 leads to connect from the components to the microcontroller, plus power and ground, timing crystal, etc. Haven't a clue where to begin but I'd like to keep it fairly compact…
@97007841765 жыл бұрын
Simplicity is the ultimate sophistication. Nice work mate. I tried several times, changing the grid settings. But couldn't place the elements properly on the grid positions, why? Same type of resisters, but some are not sitting on positions. Please make a video explaining the layout design.
@Berred5 жыл бұрын
I hope I can make the video, depends on my time I have...
@elliotcruz78215 жыл бұрын
I love the soldering
@andyhubbard73744 жыл бұрын
Great tutorial! Thanks
@claudiostano5 жыл бұрын
wow!! great tutorial !! I didn't get the type of narrow wire you are using to build the path ( 4:09 ), could you kindly tell me? =) thanks a lot !!
@matambale5 жыл бұрын
I was wondering the same thing - look under SHOW MORE, he says: Uses wire: Tinned or silver plated copper wire diameter 0,3mm (AWG 28)
@claudiostano5 жыл бұрын
@@matambale thank you !!! Good catch!! I missed that !!! =)
@thomascross44237 жыл бұрын
What is the wire you solder on to the prototype board
@Berred7 жыл бұрын
Its a tinned copper wire with a diameter of 0.3 mm
@selaoren32946 жыл бұрын
Do you have a link to buy it?
@jishusingh83616 жыл бұрын
I could get only enamelled copper wire, no thinned. would pulled out copper wire from single strand wire do?
@killerdalek6 жыл бұрын
Yes. I have some 56/03 somewhere. One metre of that would yield 56 lengths of 0.3 mm wire that would be ideal.
@derekr78146 жыл бұрын
Berred where do you get that wire from?
@inma56656 жыл бұрын
My hero
@blackhawk99356 жыл бұрын
Great Tutorial Thanks a Bunch
@pandarzzz6 жыл бұрын
Thank you for sharing this interesting video! 😺🖐
@user-mo8mi5ws3j5 жыл бұрын
Bravo , nice job .
@davoodzarei695 Жыл бұрын
❤️👍
@MalPlan014 жыл бұрын
What is the conductor called that he used to "layout" the circuit on the back of the board? Also, what gauge is it and what is it made of? If anyone know your response would be very helpful. Thank you.
@assamita814 жыл бұрын
I want to know too!! looks like the kind of wire in a resistor
@frankreiserm.s.80393 жыл бұрын
You are fast. It would take me 4 hours to make this CB. Are you solder bridging the components to the wires? It is hard to see. Where did you get the 555 timer DIP chip? All I can find these days are SMDs.
@jromhek20706 жыл бұрын
Thanks for sharing , two question please is there are an easy way to transfer schematic to components layout ? and which is more power efficient running a 12 volt dc fan with 9 volt battery using PWM or xl6009 ? Keep up the good work
@Berred6 жыл бұрын
I used a CAD Software for schematic to PCB layout (eagle). XL6009 is a switch mode DC-DC converter and uses PWM. For a Fan a good choice.
@gbarger45815 жыл бұрын
Thanks, I love the video. I just found it while trying to figure out how to connect my components on the grid PCB. I have a question though because I'm just starting the learning process. What is the reason you would use a 555 timer and a pot to control your motor instead of just a pot. Wouldn't dropping the voltage directly on the motor have the same effect?
@Yinte_Klop_Blunt6664 жыл бұрын
Power efficienty. It's way more efficient with pwm.
@jannis68414 жыл бұрын
Hey, danke für das Teilen des Videos. Mit welchen Programmen arbeitest du? Womit hast du das Layout gemacht?
@Berred4 жыл бұрын
Eagle
@frankreiserm.s.80393 жыл бұрын
Great video. When I am stuffing a PCB, sometimes I solder in the wrong component. I desolder it, clean the copper foil side with solderwick, and reinsert another component. However, frequently I cause the foil pad to raise, and I destroy the PCB. I have my iron at 450 and only hold the iron on the foil for a short time, about 2 to 3 seconds. What am I doing wrong? Thanks, Frank.
@jstro-hobbytech Жыл бұрын
Lower the temperature to 400 and that can't be helped. The pads come off. I think that's why he puts a half ring around in case he has to desolder. A year late but I'd want someone to answer me. Take care
@j.clowers72237 жыл бұрын
Turn up the volume
@markuswerner44255 жыл бұрын
Superklasse !!! Gibt es da auch Platine plan und Stückliste ? Das wäre Toll ! Liebe Grüße
@Berred5 жыл бұрын
Auf github zu finden: github.com/berred16/555-PWM-generator
@pantoffelheld147 жыл бұрын
Hey wo hast du das Draht her? Kann nichts so wirklich finden. Danke im Voraus!
@xrcontrol7 жыл бұрын
Ich nehme immer sowas hier: www.ebay.de/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=silberdraht++mit+kupferkern&_sacat=0 app.box.com/s/hspofl7mr5l75soy9b8gcw4w5nytjpp3
@jkreviea4 жыл бұрын
Great technique...but how about a tutorial on how to lay out the board to get to this step?
@jstro-hobbytech Жыл бұрын
I like what you're doing but your solder seems like the flux leaked out of it for how well it sticks.
@vansonhk4 жыл бұрын
Silly question: is the Tinned or silver plated copper wire diameter 0,3mm a conductor or not? I heard some copper wires need their outer coatings removed before soldering, and actually that's what copper wires on my hand behave. This gives me a lot of pain while testing conductivity before soldering each joint.
@Ma7amed5 жыл бұрын
Really helpfull
@ubtech29383 жыл бұрын
Very usefull vedio but what wire is that made of style or nicrom or nicle