How to Solder SMD Components.

Hello Engineers,
I'm Prosanta Biswas From Kolkata, West Bengal, India, and i'm an Electronics Hardware Design Engineer.
I'll cover the different types of SMD components, the tools you'll need for SMD soldering, and step-by-step instructions on how to properly solder SMD components to a circuit board. You'll learn about the importance of proper heating, soldering technique, and much more.
So, if you want to master the art of SMD soldering and take your DIY electronics projects to the next level, be sure to watch this KZbin Shorts video! Don't forget to like, comment, and subscribe for more electronics tutorials and tips.
if you have any query feel free to contact me:
[e-mail]
WhatsApp: [phone]
#shorts #SMDsoldering
#SMDcomponents
#capacitorsoldering
#resistorsoldering
#0805soldering
#0603soldering
#SMD0805
#SMD0603
#SMDcomponentsoldering
#SMDcapacitor
#SMDresistor
#SMDsolderingtips
#SMDsolderingtechniques
#SMDsolderingguide
#SMDsolderingtutorial
#electronics
#diy
#solderingdiy
#solderingtutorial
#solderingtips
#solderingtechniques
#solderingguide
#soldering101
#solderingbasics
#learningsoldering
#electronicsengineering
#electronicstutorial
#electronicshobbyist
#hobbyelectronics
#electronicsproject
#diyelectronics
#electronicsskills
#electronicscomponents
#electronicsworkshop
#electronicstools
#electronicsequipment
#electronicsupplies
#electronicshacks
#electronicsrepair
#electronicscircuit
#electronicsdesign
#electronicslab
#electronicslife
#electronicsmaker
#electronicseducation
#electronicsenthusiast
#electronicslover
#electronicsworld
#electronicsexperiments
#electronicslearning
#electronicsfun
#electronicsinspiration
#electronicscreativity
#electronicsart
#electronicsmakercommunity
#electronicsmakerfair
#electronicsmakerfest
#electronicsmakerspace
#electronicsmakerspirit
#electronicsmakerstyle
#electronicsmakerlove
#electronicsmakerlife
#electronicsmakerpassion
#electronicsmakerstudio
#electronicsmakerfun
#electronicsmakerinspiration
#electronicsmakercreativity
#electronicsmakerart
#electronicsmakerworld
#electronicsmakerenthusiast
#electronicsmakerlover
#electronicsmakerpassionate
#electronicsmakerclub
#electronicsmakercommunity
#electronicsmakerfair
#electronicsmakerfest
#electronicsmakerspace
#electronicsmakerspirit
#electronicsmakerstyle
#electronicsmakerlove
#electronicsmakerlife
#electronicsmakerpassion
#electronicsmakerstudio
#electronicsmakerfun
#electronicsmakerinspiration
#electronicsmakercreativity
#electronicsmakerart
#electronicsmakerworld
#electronicsmakerenthusiast
#electronicsmakerlover
#electronicsmakerpassionate
#electronicsmakerclub
#electronicsmakercommunity
#electronicsmakerfair
#electronicsmakerfest
#electronicsmakerspace
#electronicsmakerspirit
#electronicsmakerstyle
#electronicsmakerlove
#SMDcapacitors
#capacitorsoldering
#0805capacitor
#0603capacitor
#SMDcomponents
#solderingtutorial
#electronicsengineering
#DIYsoldering
#SMDsolderingtips
#electronicsrepair
#SMDrepair
#SMDsolderingguide
#SMDsolderingtechniques
#SMDsolderingtricks
#capacitorsolderingtechniques
#capacitorsolderingtips
#SMDsoldering101
#SMDsolderingforbeginners
#SMDsolderingmadeeasy
#SMDsolderingdemonstration
#SMDsolderingexplained
#SMDsolderinghowto
#SMDsolderingvideo
#SMDsolderingstepbystep
#capacitorsoldering101
#capacitorsolderingforbeginners
#capacitorsolderingmadeeasy
#capacitorsolderingdemonstration
#capacitorsolderingexplained
#capacitorsolderinghowto
#capacitorsolderingvideo
#capacitorsolderingstepbystep
#SMDsolderingtechniquesforcapacitors
#SMDcapacitorinstallation
#SMDcapacitorreplacement
#SMDcapacitorrepair
#capacitorreplacement
#capacitorrepair
#solderingtools
#solderingiron
#solderingstation
#solderingflux
#solderingsupplies
#solderingaccessories
#howtosoldercapacitors
#capacitorsolderingguide
#capacitorsolderingtechniques
#solderingtechniques
#howtosolderSMDcapacitors
#SMDcapacitorsolderingtips
#SMDcapacitorsolderingtechniques
#SMDcapacitorsolderingguide
#SMDcapacitorsoldering101
#SMDcapacitorsolderingforbeginners
#capacitorinstallation
#capacitorremoval
#capacitorinstallationtips
#capacitorremovaltips
#SMDcapacitorinstallationtips
#SMDsoldering
#capacitor
#solderskills
#electronics
#DIY
#SMT
#SMDcomponents
#solderingtips
#solderingtechnique
#hobbyelectronics
#circuitboard
#electronicsengineering
#maker
#makerspace
#learningsoldering
#soldering101
#solderingtutorial
#solderingpractice
#solderingproject
#solderingbeginner
#solderingworkshop
#solderingeducation
#solderinglessons
#solderingfun
#solderingwork
#solderingart
#solderinglove
#solderingclass
#solderingforbeginners
#solderingvideo
#solderingtraining
#solderingmasterclass
#solderingchallenge
#solderingcommunity
#solderingprojects
#solderingworkshop
#solderingdiy
#solderingguide
#solderingartwork
#solderingfun
#solderingtipsandtricks
#solderingartisans
#solderingrepair
#solderinglife
#solderingideas
#solderingworld
#solderinghacks
#solderingtechniques
#solderingforsmdelectronics
#solderingforlife

[@hmann8]

good. flux is difficult to clean

[@AmigaofRochester]

Depends on the flux. I have SRA flux and it cleans better than my kester solder's flux

[@constantineb6433]

NICE WORK. A LOT OF SKILLS AVERAGE PEOPLE ARE NOT AWARE OF. ULTRA-MICRO SOLDERING. LIKE PUTTING A LEG ON AN ANT. G'DAY FROM OZ 🇦🇺

[@Native_love]

You are talented sir! Bravo! ❤

[@HomeTheatres]

Good work. What flux is used for smd soldering.

[@Electrobias]

i have using a amtech solder flux. Thank you for your support. I am sorry being late on replying. God bless you. And as always.... thanks for watching.

[@memoriesofmercia3809]

​@@Electrobiasgreat video, Christ is king

[@phr3ui559]

@@memoriesofmercia3809yep

[@marcelobravo3074]

bro, your camera is good quality. icant even see that clear with my one cellphone when i zoom on the pcb.

[@technas2452]

nice video!! what modell oder microscope do you use?

[@Shinji-R]

quality work ❤

[@Johny570]

Я так же SMDшки паяю :)

[@Electrobias]

Спасибо, Johny, за ваш комментарий! Очень приятно знать, что вы также занимаетесь пайкой SMD компонентов :) Продолжайте развиваться в этой области и делиться своим опытом. Если у вас есть вопросы или нужна помощь, обращайтесь. Удачи в ваших проектах!

[@SophiaHuang-hv9wb]

Fantastic!

[@arduinoatolyem2121]

nice soldering 👍

[@saber8424]

wow very good

[@Electrobias]

Thanks for the positive feedback! I'm glad you found the video helpful and learned a lot in just a few minutes. I appreciate your support and encouragement. Keep watching for more great content!

[@atnguyentien7897]

Hello sir, what kind of microscope you are using to record this video? Thank you

[@Electrobias]

I used my mobile phone camera to record this video, thanks for watching.

[@user-bi2lx7ou7i]

​@@Electrobias Hello, Mr Dat has asked what kind of microscope you used to for repairing SMD, not what you used to record this Video.

[@danhaines]

​@@user-bi2lx7ou7ino he didn't l, he clearly asked what microscope was used to record the video. Can you not read?

[@Eng.musashadab]

Very nice 😍🙌

[@electronicsbough3344]

very good 👍❤️

[@Electrobias]

Thank you sir❤

[@theugobosschannel8466]

Neat

[@Electrobias]

thank you ugo for your valuable feedback and support

[@aladdinelectronics]

Good job

[@maxfun9292]

Clean! 👌

[@HienNguyen-tx9vk]

Good job ❤

[@Electrobias]

Thank you for your support. I am sorry being late on replying. God bless you. And as always.... thanks for watching.

[@DenEvigePeder]

I wish Taylor swift would solder components.

[@servidor712]

thanks brothers

[@joseramos3076]

Hello, temperature and kind of tip solder thanks

[@spockfpv]

Or you could use solder paste.

[@parvezbakht8982]

Iam using Mechanic Uv559 flux. But it needs to much practice

[@CodedGamer972]

u dont need extra flux I have been soldering SMD for years, u already had rosin core soldering wire

[@Yuyam12]

In my experience you do need flux a lot of the times, otherwise the solder can stick to the iron.

[@Manche-De-Pelle]

Some are putting alot. It only gunk more your board. Also, some brand doesn't seems to have great quality rosin in it. If I don't put flux, my joints aren't shiny and smooth. But with my favorite brand of solder, I don't had flux

[@user-if2gz7fi9r]

Love it

[@laiyiwei912]

滿好的👍

[@CAservice90]

👍

[@rexelliz]

I'm a beginner. What is that clear liquid that you brushed over?

[@johnbalderas1989]

Flux, it helps with thermal transfer

[@Canon_In_D]

А сразу поставить элемент и запаять с обоих сторон ?... Предварительно зафлюсовав контактные площадки. А вообще эти элементы лет 20 назад ставили автоматы и паяли всё сразу в печи . Ну где-то прогресс не так торопится....

[@pavlentil]

Так и нужно делать, это автор просто извращается так, такой метод не имеет преимуществ.

[@ninjaslash52_98]

i have the question. how do i do this with even tinier components like half the size of a grain of rice... i got it on but its very hacky lookin

[@Electrobias]

WhatsApp me on [phone]

[@GAMEofRADIATION]

Camera Model or Mobile Model ?

[@Electrobias]

I use a microscope.

[@user-eq7xg8gx1g]

My eyes, aaaaa

[@mehryar78]

🙏🙏👍👍👍🙌🙌🙌

[@geopeliaaow3768]

ای جان 😅

[@Electrobias]

Thank you for your support. God bless you. And as always.... thanks for watching.

[@geopeliaaow3768]

@@Electrobias thanks to you also And your welcome dear brother.

[@abdsal96]

Bad joints from the left side

[@gonzalobaez6792]

De lujo

[@marcoborba6586]

Gostaria de saber qual é o fluxo que você usa🇧🇷

[@sotamastermaster-service]

Молодец, паяешь, как я, аккуратно. Единственный short, которому я поставил лайк. В основном в short такие пайки других каналов - такое говно и жопорукие.

[@GalvaoTec]

Bela dica 😂

[@Electrobias]

Thanks 😊

[@0nepieceofmybody]

nice

[@Electrobias]

thank you eddy for your valuable feedback and support

[@mazensallowm5777]

طريقة جميلة وسهلة🎉

[@Electrobias]

Thanks 👍

[@unicbertprofi2851]

Nice and easy

[@faisalnaseem3438]

App repairing k liye konsa camra use karty hain madol no & price Thanks

[@Electrobias]

I used my mobile phone camera to record this video, thanks for watching

[@tennicktenstyl]

passable but why was the PCB designed with no thermal separation from the ground plane

[@Electrobias]

it's for better ground connectivity........thanks for watching.

[@tennicktenstyl]

@@Electrobias that's not good

[@maxxiang8746]

@@tennicktenstyl i think its used mostly in rf boards

[@user-eq7xg8gx1g]

My eays

[@sonyledlcdspecialistsafzal1228]

Camera konsa use kiya he aapne ?

[@Electrobias]

I used my mobile phone camera to record this video. thanks for watching.

[@sonyledlcdspecialistsafzal1228]

Ok sir mene rf4 camera liya he per usko kisme lgake use kru samaj nahi aaraha he

[@Electrobias]

Check out the RF4 camera tutorial videos on KZbin. And keep growing up! 👍🏻

[@chipdip8393]

Отличный микроскоп, а пайка не так уж отличный.

[@Shinji-R]

bruh

[@Tjup]

well we just float it, soo

[@mohdothman5824]

TU wiring diagram pakai otak memang gila...TU Suis problem

[@Thanh_Nguyen007]

Làm thế nào để phân biệt 2 đầu cực???

[@herrlich1461]

What's that liquid?

[@Electrobias]

Hello Herr, this liquid is Soldering Flux.

[@herrlich1461]

@@Electrobias Thanks for the info. I thought it's almost like water. 😁

[@user-mq8zu3xl9c]

Часто так делал

[@user200712]

Что не ровно припаял то?

[@Electrobias]

Благодарю вас за комментарий, Андрей Боков! Возможно, вы заметили, что не все компоненты припаяны ровно. В работе с электроникой иногда возникают сложности, и я всегда стараюсь достичь наилучшего результата. Если у вас есть какие-либо вопросы или нужна помощь, пожалуйста, не стесняйтесь обратиться. Спасибо за ваш интерес!

[@SanjayYadav-ph7bf]

My sanjay kumar yadav

[@nik7261]

Там не должна конденсатор по факту😂. на новую плату конечно легко установить электролит кон р😅

[@AedanBlackheart]

Da Nasrat

[@MG-mb8jz]

Wait you forgot to test before soldering the other side

[@milankamati9511]

केछ

[@SanjayYadav-ph7bf]

Mobil ke bare men

[@SanjayYadav-ph7bf]

Kuch

[@lengda]

bad ! too much flux will make electric short

[@abrahammoya7456]

Hola cómo sé llama La canción? 😁

[@Electrobias]

I don't know the name of this song. I found this music on KZbin. Thank you for your support. God bless you. And as always.... thanks for watching.

[@SauvikRoy]

May god give me as steady hands as you! Great job!

[@SanjayYadav-ph7bf]

Mere

[@bahrameskandari6853]

درود بر شما

[@SanjayYadav-ph7bf]

Kam Sikna hai

[@k.g.6114]

too many solder. it will cause solder cracks.

[@cobar5342]

I hat SMD soldering

[@michaelcho804]

납땜 졸라 못하네 플럭스 범벅이고

[@hw_sc]

Bad work...

[@Electrobias]

thank you for your valuable feedback, I'll rectify my content in next video

[@yummyklown9226]

Why?

[@Sidorov711]

Ахаххахха / hahahahah