How to Soldering SMD Component's Full Details in Hindi (

Hello Engineers,
I'm Prosanta Biswas From Kolkata, West Bengal, India, and i'm an Electronics Hardware Design Engineer.
if you have any query feel free to contact me:
Email: [e-mail]
WhatsApp: [phone]
Learn How to Solder SMD in this Detailed Surface Mount Soldering Guide.
SMD Soldering and Desoldering is little different from thru-hole Soldering and Desoldering Process.
SMD Desoldering is generally done using a Hot Air Blower while Soldering can be done using a soldering iron and solder wire or using solder paste or solder balls (BGA) and SMD Hot Air Blower / rework station.
How to Soldering SMD Component's Full Details in Hindi Part-2 (#007)
• Video
There are many process for surface mount soldering for SMD Components but none is perfect for all applications.
Types of SMD Soldering Process
All SMD soldering processes have technical concerns and there are ways to resolve those concerns. Because it offers higher yield and lower operation cost, convection dominant IR soldering has evolved as the preferred process for reflow soldering.
Vapor phase soldering will not disappear but will continue to be used in niche applications. For some specialized jobs, other reflow soldering processes such as laser and hot bar resistance soldering are also used.
These soldering processes are intended not to replace either vapor phase or IR but to complement them. The process ultimately used should be selected on the basis of the specific requirements of the intended application, the solder defect results, and the overall cost.

[@ChadLuciano]

I don't speak one word of Hindi and understood everything in this video...all the way to the orientation and indicators for positioning components...this video is stellar...the drag soldering technique was executed nicely...watching this video will help you to improve technique and expertise...much thanks!! मैं हिंदी का एक शब्द भी नहीं बोलता हूं और इस वीडियो में सब कुछ समझता हूं... घटकों की स्थिति के लिए अभिविन्यास और संकेतक तक सभी तरह से... यह वीडियो तारकीय है... ड्रैग सोल्डरिंग तकनीक को अच्छी तरह से क्रियान्वित किया गया... देख रहा हूं यह वीडियो आपको तकनीक और विशेषज्ञता को बेहतर बनाने में मदद करेगा...बहुत धन्यवाद!! main hindee ka ek shabd bhee nahin bolata hoon aur is veediyo mein sab kuchh samajhata hoon... ghatakon kee sthiti ke lie abhivinyaas aur sanketak tak sabhee tarah se... yah veediyo taarakeey hai... draig soldaring takaneek ko achchhee tarah se kriyaanvit kiya gaya... dekh raha hoon yah veediyo aapako takaneek aur visheshagyata ko behatar banaane mein madad karega...bahut dhanyavaad!!

[@Electrobias]

@ChadLuciano thank you for your valuable comments and support👍

[@pravinpadale8787]

Very useful. I never thpught Ic’s could have been soldered manually with such easy technique. Thanks you for the video.

[@Electrobias]

thank you for your valuable comment.

[@ibazur]

thanks for putting 'full details in Hindi' to be not misleading, respect

[@sulemanansarishorts9973]

Not gonna lie video is amazingly informative and simple at the same time. Great work dude

[@hydarrashidi5704]

Hello from Iran, thank you very much for your useful and valuable educational videos.💯👍

[@Electrobias]

@hydarrashidi5704 thank you for your valuable comments and support👍

[@souravbhattacharyya3392]

Detailed unskipped explanation 👌khub valo laglo

[@Electrobias]

Thank you for your support😊

[@D.k.Singer]

*Excellent uploading with practically 👍👍*

[@Electrobias]

Thank you for your support😊

[@apnaagritech786]

Wow, good and easy way to soldering SMD component. I fully support your art and work. 🎁💯🎁💯🎁💯🎁💯🎁💯

[@Electrobias]

I am inspired by your comments. Thank you for your support😊

[@bhuvanpatle4523]

It looks too easy to do But when you where actually do it then you know how much practice accuracy and stable hands it takes to complete a single component neatly 😀💭

[@sriyantra1939]

Take a damaged board, remove components and try resolder them in their own place for a practice.

[@stefaniavargas7030]

@@sriyantra1939 Excelente estrategia, gracias por la idea

[@Electrobias]

Practice soldering and after some time you will be able to solder very well, Thank you for watching😊

[@KUTAMPURI]

Right

[@AmitJayant]

Great explanation, superb camera focus and quality. Perfect video 👌🏻

[@luizclaudiomoraes5910]

Parabéns!!!! Um Trabalho perfeito!! Obrigado por Passar esse conhecimento. Saúde e Paz.

[@Electrobias]

Thank you for your support😊

[@ElectroCreativity]

व्हिडिओ और व्हिडिओ कि क्वालिटी बहोत हि अच्छी थी | धन्यवाद

[@Electrobias]

आपकी अमूल्य टिप्पणियों के लिए आपका हार्दिक धन्यवाद. Thank you for watching😊

[@Rich.vibe.aus.]

New generation must learn.this is where india lacks

[@Electrobias]

Thank you for your support😊

[@MasterJENNY.]

bahut gyan vardhak video bnaya dost, thank you dost ♥️♥️

[@Electrobias]

Thank you for your support😊

[@p.k.953]

The thing is, those solderpads are huge so it looks easy in the video! But in real life scenarios.. they are more compact and you have to use a rework station...!!! I'm a mobile repairing technician as well as audio products manufacturing technician!

[@Electrobias]

Yes, Thank you for watching😊

[@darkozivkovic8727]

👍👏👏

[@ajmalsyed7969]

Your whatsap number .plzzz

[@ShanKhanYousafzai]

Very Clean and professional way Thanks for this information

[@ErCanEverything]

Good video, well done my Friend👏🙂🤝🤝🤝

[@Electrobias]

Thank you for your support😊

[@MohdUsmanwani-x6x]

Aise he video ki zaroorat thi ..... superb..... Make more videos like as.

[@markokonigschulte7551]

Perfection! What kind of solder do you use and whats the temperature of the iron set to?

[@mingosutu]

Thanks a lot. I don't understand Hindi or Urdu, I have learned something or most of the video. Thanks again.

[@deepurangarajan8696]

Ya it's a good training. But whe you showed the different type of components, simultaneously you should show the backside/bottom side of the component also. Or atleast during the soldering time you should show the other side of the component and how it should be placed on the board

[@Electrobias]

WhatsApp me [phone] I will explain that. Thank you for watching ❤

[@Bestqualitytop]

electrical work is very good But it is also very dangerous ❤your video is good

[@dsouza1271]

Não entendo a sua fala, mas você fazendo fica fácil de entender. Obrigado pelo envio do seu vídeo.

[@Electrobias]

Thank you for your support😊

[@arupsarkar2003]

সত্যি দাদা ভালো লাগলো। খুব সুন্দর বোঝানোর ক্ষমতা তোমার।,❤️

[@Electrobias]

Pase theko eei rokom rro oonek video aasbe eei Chanel e. Thank you for your support😊

[@arupsarkar2003]

@@Electrobias ❤️❤️❤️

[@journeyoflife58]

প্রশান্ত বিশ্বাস ভাইয়া প্রথমে লিড লাগানোর পর জেল জাতীয় কিছু লাগালেন এর নাম কি?? আপনার ফেসবুক লিংক দেয়া যাবে

[@franciscosoarescaetano6669]

Vc nós deu uma bela aula de como soldar componentes eletrônicos em uma placa,me sinto muito grato pelo aprendizado do qual obtiver pelo seus conhecimento.

[@Electrobias]

Thank you for watching

[@vfthome-yt]

​@@Electrobias Thank you as well man, I'm also brazilian here hehehe. Can you share a link for a good solder and flux so I can buy ? Like which model do you think is best?? Lead free?? Normal solder? And about flux?

[@guliyevshahriyar]

Thank you very much, learnt a lot of knowledge in just a few mins, will buy that flux too, great skills. Keep up the good work.

[@Electrobias]

Thanks Şəhriyar Cəfər Qulu for the positive feedback! I'm glad you found the video helpful and learned a lot in just a few minutes. I appreciate your support and encouragement. Keep watching for more great content!

[@geovanerodrigues4160]

Que maravilha !! Que habilidade e perfeição !! Ficou tudo perfeito, Show !!!

[@Electrobias]

Thank you for your support😊

[@bikemechanicmax667]

Video jara short banao , jankari achchi de rahe ho par logo ko short videos achhe lagte hai 5 minutes ke aas pass par puri jankari ke sat 🥰🥰 love you

[@Electrobias]

Thank you for the suggestion, I'll try this. Thank you for your support😊

[@bikemechanicmax667]

@@Electrobias wellcome 🥰

[@jjj0nathan]

how many years will it take to reach this level of perfection ?

[@Electrobias]

I worked the last 6 years in this field. Thank you for your support😊

[@battuvarinder]

Nice video... I have been in this field since 1998.. now I feel smd IC are easier to replace than the dip ics

[@jk...-tr4kf]

​@@Electrobiasgood me also 7 years this field. And perfectly reworker,

[@Simsol487]

Only practice, I reach this level in only one week

[@Arush66]

I guess you need the good equipment first

[@bullygram]

Beautifully, I admire your craftsmanship, mean the killer soldering skills you got!!!

[@Electrobias]

I am inspired by your valuable comments, Thank you for your support😊

[@lindomarjoao4034]

Não entendo sua língua, mas compreendo seu aula ,aprendi demais. Obrigado!👏🤝

[@Electrobias]

I will add subtitle upcoming all video. Thank you for your support😊

[@laypyu]

Thank you for a fantastic tutorial. Very clean work as well.

[@jozsiolah1435]

You have to fix the soldering iron, and it needs a sharpened wire for using as tip. Instead of using the solderer, place the lighter panel to the solderer, standing firmly. I used a magnifying glass to see better the panel’s components. However, if you don’t have electricity at all, you can use a tin candle, can make it at home, suitable as a fitted solderer, and works with 4mm ² solid copper wire, if sharpened as a screwdriver. The wires corrode quickly, but works.

[@Electrobias]

WhatsApp me [phone] I can provide you what meterial you have need. Thank you for watching ❤

[@bapakibukibuk]

Hay hello good morning

[@MaheshMahi-i9u]

Hello, sir good evening kaise ho aap mai aasa karta hoon aap acha honge mai apki vedeos dekhta hoon sir kaphi intresting Inspiaring and motivation hoti hai sir aap har ak choti si choti chiz ko bari ki se samjhate haein sir meri aapse yehi request hai sir ki aap isi tarha vedeos dekhne walon ko samjhate rahein sir thank you, love you sir subh ratri

[@benjamink7311]

Can you give link for solder fux and what is the size of solder wire you are using

[@Electrobias]

I've used 'BOND 60/40' Solder wire, and 'Amtech Nc-559-Asm' Solder Flux. It's a very good solder flux, you can try this one time. amzn.eu/d/jhZmZqB Thank you for watching😊

[@siyahkısım]

@@Electrobias hindistan fakir ve kirli dinsiz ineklere tapacak kadar akılsız aptallar

[@fellpower]

I cant speak hindi, but it was clear to see. Thx for that quality. But u need abetter tip for your soldering iron, something smaller or like a knife. its muuuuch better to solder with it

[@parsotamkapadi6992]

Sir oss team t12x soldering iron station ka review kijiye

[@Electrobias]

I haven't used this soldering iron yet, If I ever use it, I will definitely make a review video. Thank you for your support😊

[@deepakkulmethe7219]

Q

[@deepakkulmethe7219]

Pqpp

[@hayatmalik7077]

smd soldering per sab say behtreen video

[@Electrobias]

Thank you for your support😊

[@juvenaledison3099]

Verdadeiro profissional parabéns

[@Electrobias]

Thank you for watching😊

[@geovanerodrigues4160]

Esse sim !!

[@MarcioFariasOficial]

Congratulations, I also have a channel here in Brazil and I really like your videos

[@nirmalkashyap2028]

Over volteg cantroller me konsa mospet khrab hone se aati

[@Electrobias]

It depends on your device hardware design. Thank you for watching😊

[@moyiize]

Thanks a lot for this perfectly clear video. I loved every minute of it. And learned a lot even though I do not understand Hindi apart from Apka nam kia he? 🤣. Will watch more from your channel.

[@RemDIMBAY]

Огонь👍👍👍

[@Electrobias]

Thank you for watching😊

[@soumalya9694]

Outstanding video sir, pranaam, namaskar, thank you sooo very much 🙏🙏🙏❤️❤️❤️💐💐💐

[@Electrobias]

Thank you so much👍

[@Mots-mot]

Please link to the tools used and flux and tin details.

[@Electrobias]

i've used "Amtech Nc-559-Asm" solder flux amzn.eu/d/b7LSaSC thank you for watching

[@youhardev]

​@@Electrobias 1100 ka 100 mg 😐 .give me link of more expensive one.

[@Electrobias]

@@youhardev WhatsApp me : [phone]

[@bapakibukibuk]

Good morning

[@arkam083]

​@@Electrobiaskahiya konsi hai aur 28:23

[@chinnarao326]

Resp Sir! Nice Vedo. Dhanyavaadh Sir. -- ChinnaRao Paderu Visakhapatnam Dist Andhrapradesh

[@user-kimo733]

It's sad because there's no Arabic 💔 translation.

[@Electrobias]

Sorry for that, Thank you for your support😊

[@madhaviraama728]

Very useful video for beginners ...👍

[@jainulraaz1040]

Sir apna no. Dijiye

[@Electrobias]

You can contact me at this Email [e-mail]

[@pandeyrahul999]

Sir aap ultra professional ho ❣️❣️❣️🙏🙏🙏😊

[@worldinstrumentationengineer]

YOU ARE EXPERT IN WORK

[@Electrobias]

Thank you for your support😊

[@dushi1903]

I don’t speak Hindi, but this was quite educational.

[@unknownforever4900]

Excellent video tutorial. Greetings from Lima Peru.

[@Electrobias]

Thank you🙏

[@unknownforever4900]

​@@ElectrobiasMy friend, Do you know how to clean or completely remove the tin from the tracks of a component?

[@Somanathan-hj7ge]

Dear brother, you are also still learning to solder, you watch how Americans professional people are soldering, after soldering it should shine , before soldering apply flux on board, use less flux,and solder, more solder will increase total resistance in circuit, good luck

[@ronaldoguemo8445]

nice sir you have a very good soldering tecniques

[@Electrobias]

Thank you for your support❤

[@cleitonakaspyda]

amazing!!! even tho we can understand generally it would be awesome to have some subs, great work!

[@Electrobias]

Yeah thanks

[@zaheermaniyar8806]

💯%nice video thank you sir God bless you

[@TheRuelrubic]

nice content million of thumbs up bro.

[@Electrobias]

Thank you for your support😊

[@rupeshpatel2782]

You are master in soldering Very nice performance Please tell me how many watt of your soldering iron

[@davidemanuel1300]

More video Sir marvellous and a big salute to You with love ❤️

[@ihsanshani2259]

Wow️ it's amazing bro im learning

[@Electrobias]

Thank you for watching and support😊

[@1967Tariq]

Beautiful professional job done

[@Electrobias]

Thank you for your support😊

[@ssn7870]

Worth to watch.. Thank you very much..

[@Offline__pradeep]

What a perfection sir jee 🙏🙏🙏🙏🔥🔥🔥🔥🔥🔥

[@martinromeo1006]

Nice work 👏 my friend 👍 well done

[@Electrobias]

Thank you for your support😊

[@MemesRandomXD1]

nice job. congrats. its the best video.

[@Electrobias]

Thank you so much👍

[@masjes86]

Thanks mr. Tutorial very good

[@Electrobias]

Thank you for your support😊

[@batofgotham4383]

Thank you. Beautiful work.

[@obviouslynotjuan1290]

Imma learn Hindi just to watch and learn from his video.

[@sulemanansarishorts9973]

Lol

[@michaelstolman536]

Even though I do not understand Hindi I basically understood everything EXCEPT what was the gel type stuff you were pasting on the board and components?

[@suppcomputing7805]

Thank you very much sir for your valuable time for us..... nicely explained and done....🙏🙏🙏🙏

[@Electrobias]

Thank you for your support❤

[@FraazYT]

Solder iron konsa hai apka, mera solder iron solder hi nahi pakadta h

[@BanglaStuff]

Which soldering iron are you using? So much fluent....

[@ratanchakrobarty4312]

Achhi jankari he..but kis device ki pcb he...??

[@Electrobias]

Eee mera office ka pcb hai, thank you for watching😊

[@ZahraSoltani-e5l]

That was so helpful, thank you so much

[@anandajayathissa8642]

Very clear lesson thank you imfallow your video

[@balarampyla7787]

Thank you for very useful information sir.....

[@Electrobias]

Thank you for your support😊

[@EdwinBoadu]

This your Two tips is the pro ❤

[@marcioalves6597]

Show muito boa a aula!! Parabéns !!! Obrigado por compartilhar, abraços Brazil!! 👏👏👏👏👏

[@MrGolu49]

kon sa compny ka solder iron hai sir.

[@masyudiofficial1718]

Very detail you give the information

[@ArashReceiver-nz5pn]

This is what I wanted to learn

[@quenchtv5436]

He make it look easy i spent 2-3 hours to sold a small piece im wondering what brand is he using for solder wire cos mine dont really stick i believe this is expensive one for sure im also wondering if you burned those white lines does it affect the performance of the computer??? Also what kind of liquid to use to remove the flux?

[@bmcgorakhpur5787]

V nicely soldered 👍

[@Electrobias]

Thank you🙏

[@RiseWithSatyam]

Very helpful video thankyou so much sir

[@Electrobias]

Thank you🙏

[@sonumonu9112]

Hi dada, amar ekta help chai, Sony audio DSP IC 701 chai kotaye pabo plz ettu bolben

[@Electrobias]

WhatsApp me [phone] Thank you for watching ❤

[@12omshantiom]

Dada Tumi ki company te kaj koro naki video khub sundor lagche ❤️❤️❤️❤️

[@Electrobias]

WhatsApp me [phone] for butter communication Thank you for watching ❤

[@manojbt8160]

Sir really super, please make a video on desoldering of smd components 🙏

[@Electrobias]

I'll make a video on this topic, Thank you for your support😊

[@andikarahmanhakim3235]

well sir thank you for this video to help me a lot 😁

[@nirdeshpaudyal9215]

Flux works like magic ❤❤❤

[@AshokKumar-vh1pw]

Excellent video. 👍

[@Electrobias]

Thank you for your support😊

[@sureshsukumaran7474]

Ya you are professional...

[@Electrobias]

Thank you for watching ❤

[@caution1088]

Tomar kajer nipunota dekhe valo laglo.

[@Electrobias]

Thank you for your support😊

[@vikbatra9602]

What brand of flux and solder do you use? And for cleaning what brand of alcohol do you recommend?

[@Meqdaad786]

Bhai aap heat iron use krte ho?

[@ydiadi_]

Great video bro which camera ur using ?

[@Electrobias]

Thank you for your support 💐 I have used mobile phone camera

[@ydiadi_]

@@Electrobias bro which phone and how did u set up please bro reply

[@senthils9726]

What smd mechanic your using I'm new leaner bro plz tel which smd mechanic was best for me

[@Electrobias]

You can use the Sugon 2020D or Sugon 858D SMD Rework Station, it's one of the best hot air guns.

[@elkabelblue]

thanks for putting 'full details

[@chamilathuduwage7646]

Thank you... Good Luck.

[@Electrobias]

Thank you for your support😊

[@frct468]

Parabéns pelo vídeo. Saudações do Brasil!!!