How To Solve a TDM900 Low RPM Engine Stop Problem

[@patthompson5298]

I have done this to a few of these bikes. Well done good video. Only please " do not press the red button to shut the bike down, this is a RED button for accident purposes only. It will wreck your CPU / ECU by spiking it . Only use the RED button in an emergency . Use your ignition switch instead all other times. Great video cheers.

[@45ltr]

what about the idle screw on the right hand side , just under the seat????

[@jpreesink6547]

You are a hero! Much improvemt for my bike. THANK YOU

[@jbx3396]

Well done ! Your idle rpm is too low (1100/1200rpm). This may increase the risk of rear wheel lock on quick downshifting. It's better to set it up to 1400rpm.

[@mangogunes]

Thank you so much, you have a awesome website for tdm owners.

[@hatzikou]

J BX how can setup my rpm bro?

[@mangogunes]

hatzis katsis its top of oil control stick dude, little valve turning left and right

[@total22cal]

So, what is that wire there for? and what change does removing it make to improve the low RPM stoppage problem?

[@mangogunes]

total22cal That is controller of air-intake system.While airintake is working tdm has low rpm sickness so it should be disabled for my opinion

[@khoohs]

hi, i bought a 2002 and it stalled on my first day lol... i saw your vid and see that the brown/black cable is 8th from left, but your video mentions right... havent test ridden after removing it, i guess i took the correct one out. anyway, great video! this stalling thing is dangerous imho

[@mangogunes]

+Desmond Khoo Hey! I hope your problem will be fixed too. Everything awesome on this motorcycle except this problem.

[@harun8081]

Güneş Gülturan bey tdm900 almak istiyorum yardımcı olurmusunuz dikkat etmem gereken neler var

[@btmehmetkaplan]

It works for me! greaat, many thanks!!!

[@21777gabriel]

Very good info Gunes,i will do it asap cause many times engine turns off on starting in low rpm on throttle. is there any chance to have any other disfunction by doing that or it is perfectly safe and only for that purpose?

[@mangogunes]

+Gabriel Gabriel Hey Gabriel! In my opinion this is the best solution about this problem. There is 2 different way to do that function but ı dont know detail of that solutions. I select this one because its easy and safe.In other ways you should disassemble gasoline tank and some parts like filters etc.You can search some greek websites about tdm with google translate, they are very interested on TDM and ı offer you advrider.com for technical issues.

[@21777gabriel]

+Güneş Gülturan ,,Hey Gunes how r u? Today i'm going to disable this black/brown cable we talked about cause yesterday happened 2 times when i was in road when i tried to down shift gears,,in example from 4th gear to 3d gear, engine stopped,,damn that low rpm.i hope this will solve the problem at last. Did that thing happened to you as well when you are on the road or only when you are stopped?

[@mangogunes]

Gabriel Gabriel Hey! , ım fine thanks a lot.usually ıam using gear with non-clutch.But when ı hold clutch more than 2-3 sec, engine stop.Its not relevant with you are on the road or stop.its happening when you dont give throttle with using clutch or on natural gear. i hope you can fix that problem because its very annoying : /

[@21777gabriel]

+Güneş Gülturan ,,Hi mate,finally today i disabled wire from ecu and raised also rpm from 1100 to 1250 and problem solved totally.Also engine sounds and rolls better in low rpm now than before. I will see it in the next days on longer distances also to confirm for sure but for now is awesome. Thanks again!!!

[@mangogunes]

+Gabriel Gabriel Hey dude, also you can set your idle on 1400 manuel, it will be good.it isnt necessery for fuel consumption. If its solve your problem, ıam very happy.take care and ride safe :)

[@zepedrorusso]

Perfect. Thank you !!

[@POULPY47]

we're did you find how fixed that ?

[@mangogunes]

There was a website for TDM problems www.jbx9.t15.org/ before. But now it seems down.