How to solve a Windmill Cube (in nine minutes!)

[@Poo_81]

🙂

[@TNTMan-tu2cr]

great tutorial keep up the work. I was looking for this for a while now

[@cuber-ray]

Thanks for your feedback 😄 new videos coming soon!!

[@BigMacWhopper-e1c]

The good thing about this tutorial is that even if you don't know how to solve a 3 by 3, he still explains. Not like other tutorials.

[@AquaBlue427]

Best tutorial for windmill cube EVER!!! love everything about the video ❤

[@cuber-ray]

thanks for your kind words! 😆

[@AquaBlue427]

It’s so true though! The quality is AwSoMe

[@cuber-ray]

@@AquaBlue427 thank you so much! 🙏🙏

[@lightspeedlegato]

Thank you so much. I needed help with the last algorithm. I appreciate it.

[@cuber-ray]

Thank you for your kind comment! 🙏🙏

[@elch1s]

my brother has one of these and we could never solve it and i finally solved it. i know how to solve 3x3 so that might of helped me a bit and you actually got straight to the point so thank you. great vid!

[@cuber-ray]

Good job! Hope your brother is pleased with you :)

[@elch1s]

@ he didn’t seem too bothered but he was distracted by something else so that’s probably why lol. thanks so much tho i can’t believe how much this helped

[@马琳淑菲]

thank you so much

[@cuber-ray]

you’re welcome! sick stickers lol

[@JeremyandKaitlyn2024]

This tutorial was really helpful I mean this was just like a 3x3 so I understood it a lot

[@cuber-ray]

Glad that I could help you :)

[@BentleyPearson-hl2yh]

Moving the top layer corner pieces has causes me to start the whole thing over so many times

[@cuber-ray]

What seems to be the problem?

[@srujanapenmetsa-h9m]

Same

[@violetbam5394]

This was so helpful, thank you!!!

[@cuber-ray]

hope you learnt something from this video !!

[@my-goofy-channel123]

For anyone who has a flipped center, don’t worry about it until your done the last algorithm. Like your cube would be solved if it wasn’t flipped. Then, flip white side down, put the flipped center to your right, then do the following. R U’ R U R U R U’ R’ U’ R2 Repeat until solved (It took me 3 cycles)

[@jorgitus9978]

I thought the name of the cube I had was Fisherr cube, but mine doesn't have the centers in the edges

[@cuber-ray]

The fisher cube and the windmill cube are both different cubes but they do look pretty similar

[@Koenigsegggggggggggg]

SAMEEEE BROOO

[@JeremyandKaitlyn2024]

SAMEEEEE

[@menongopu]

Thank you so much finally was able to get it reset

[@cuber-ray]

hope my video was easy to follow :)

[@bone_shark2593]

Thanks

[@cuber-ray]

You’re welcome 😎

[@omarshanawani5487]

Thanks!! Ours was so far gone I took apart to reset it back to original shape. We’re gonna work on standard 3x3 first.

[@cuber-ray]

Hopefully you learn how to solve it soon 🙏😎

[@hi-bq3tf]

Wow you are very good 🎉

[@rukhnazamin5263]

Nice!

[@cuber-ray]

Thank you! 🙏🙏🙏

[@Jackfarkas1029]

Idk if mine is broke, but when solving the middle layer, one of the red pieces is turned and all the other ones are fine

[@cuber-ray]

You should try re-inserting that edge in the other way by replacing it with another edge first 👍

[@Goku33-u3f]

how do i fix the popped out edges and center pieces 😭🙏🏾

[@cuber-ray]

For the centre pieces, you should just be able to pop them back in, as the the edges, turn the side halfway, flex the cube slightly and put the piece back in. Mb for not saying that you don’t need to take apart your own cube for that segment 😭😭

[@TH-iz2hd]

The best one

[@cuber-ray]

thanks you so much! 😆

[@bijayrana7872]

Thank you 🙏🙏🙏

[@Kenzie_111-z2w]

Thanks😊

[@cuber-ray]

you’re welcome 😄

[@Kenzie_111-z2w]

@@cuber-ray could you do a megaminx tutorial

[@cuber-ray]

@@Kenzie_111-z2w have you checked out jperm yet? He already has a good tutorial so I don’t think mine would be very useful lol

[@Kenzie_111-z2w]

@@cuber-ray I will. Thanks!

[@jamiepragnell3988]

I’ve watched this guide to help me ten times and I still can’t follow it….is it just me?

[@cuber-ray]

What part do you need help with?

[@kingkulet17]

Maybe have to make it like the same Rubiks cube

[@cuber-ray]

Yeah that’s why I said that you need to be able to solve a 3x3 at the start of the video

[@FlameEdit_]

Can you please show how to solve windmirror cube

[@cuber-ray]

Sorry but I don’t actually have one 😭😭😭 I’m sure if you search for one you’ll find a great video though 💪💪

[@moothevegan4440]

i did it on my own except two centers so i used this tut

[@cuber-ray]

Yeah to avoid having to solve the centres at the end it’s best to just since the cube with yellow and white at the top and bottom

[@srujanapenmetsa-h9m]

The last corners are not going in place😢

[@cuber-ray]

@@srujanapenmetsa-h9m did you make sure that you’re doing the algorithm from the correct place?

[@Betothepower3]

Did only i used F2L for second layer😂

[@cuber-ray]

Yeah I taught the beginner method because F2L might be confusing for people just starting this cube lol

[@Betothepower3]

😂 I'm to bad to use begginer I was like nahhh I spend 20 minutes and I was like f$$## I'm doing F2L great tuto anyways new sub 😁

[@cuber-ray]

@@Betothepower3 ahh fair enough lol I should’ve said that you can just use F2L in the video, thanks for the sub! （＾Ｏ＾☆♪

[@Betothepower3]

​@@cuber-raynoooo np ❤ I'm a small ytber too 😂 I understand I just solve it 😊

[@FeonixFazer]

7:30 what if none of them are in the right place (or am I just not understanding it😂)

[@cuber-ray]

If none of them are in the right place then you do the algorithm from anywhere 👍

[@FeonixFazer]

Thank you, great tutorial

[@prod.yungktp]

idk if i got a fucked up one but how do you solve the middle one. i literally did what you did exactly and i cant solve it for shit

[@cuber-ray]

I’m just gonna give you a written tutorial which you may find easier. So assuming that you did the white cross, if you get an edge with one colour that is ‘standing up’, match it to the face that is the same colour and move it to the right. Next, you do a U’ and do the left-hand four moves. Then rotate the cube so that the front face is on the right and then do the right-hand four moves. If you get the other case, where the edge is ‘lying down’, do a U2 and rotate the cube so that the front face is on the right. Next, do the right-hand four moves. Then rotate the cube so that the front face is on the left and then to the left-hand four moves. If the edge that you want is in a second layer slot, replace it with any other edge and carry on from there. If that didn’t work, then you may have some other cube for example a fisher cube which looks very similar to a windmill cube. Hope that this helps :)

[@prod.yungktp]

i solved it earlier today and it was exactly that lol thank you @@cuber-ray

[@cuber-ray]

Glad that I could help you solve it :)

[@SarlaNimwal]

My last two corners are swaped

[@cuber-ray]

If only your last two corners are swapped and nothing else, this means that your cube is assembled wrong. To fix this, just take the cube apart and assemble it in a solved state.

[@sophiaroberts3524]

I solved it after a year🎉

[@cuber-ray]

hell yeah good job

[@YappykidsTV]

STILL CAN’T SOLVE THEM IDDLE LAYER

[@cuber-ray]

Yeah that’s probably the hardest part, but if you’re really stuck with it, you can try both ways of inserting the edge. Hope that helps :)

[@Sterlingclub24]

If you really think about it it’s the exact same as a 3x3

[@cuber-ray]

Yeah that’s basically what I say in the first 30 seconds of the video