Fantastic lesson vide for the 50g! Much better organized and helpful than anything I have seen or read for isolating variables!
@torstenlange2418 Жыл бұрын
Long ago, but thanks for the great presentation. It helped a lot. I just began and wasn't sure about the polynomial equations.
@JDW-4 жыл бұрын
With my real 50g calculator, I tested what you demonstrated at 2:57 in your simulator. When pressing the rightmost "SOLVE" softmenu, I get the same "SOLVE Error: Not exact system" message in Approx Mode. If I then change to Exact Mode and try it, my 50g beeps and then shows me a choose box that says: "Approx. mode on? YES NO". If I choose NO, I get "SOLVE Error: Mode switch cancelled." If I choose YES, I get "SOLVE Error: Not exact system." In other words, my real 50g is unable to solve it either way. Clearly, there must be some Flag differences that must be enabling you to solve it on the simulator.
@nodn37463 жыл бұрын
I got the same problem.
@pmccarthy001 Жыл бұрын
I like that skin you have for the 50g in this video. Is that skin for the HP-50g that you show in this video available somewhere online?
@Micaeljm6 жыл бұрын
I tried your third example on my "real" HP 50g running ROM "Version HP-50C Revision #2.15" (the newest one I've found), and it gives me the exact same error you got when trying to solve it on ~ (APPROX) mode, so it doesn't seems to be a problem of your emulator.
@samuelriverareimy736314 күн бұрын
Is possible to do this on the HP 48G ?
@borbs50604 жыл бұрын
Hi, a quick question I can do this with no trouble but why aren't the equations showing in an array all tiny like yours in the video?
@CristiNeagu4 жыл бұрын
You need to set flags -97 and -98 for the array display, and flags -72 and -80 for the small stack font. You can play around with more settings in MODE -> CAS to get small fonts for the various other editors.
@parragoriouse0138 Жыл бұрын
so at 1:55 how did you change from that textbook display for the arrays to the other one? cuz my calculator always uses the other one( puts it in brackets) i am wondering how i coul get it to use the textbook like appearance, am using mini stack btw
@leonardoknollmoreira27252 жыл бұрын
Hi, thanks for the video, it helped a lot! I have a question about something that I found very useful, the results are displayed in a column (the values of the calculated variables appear one on top of the other) and not in a line (one next to the other), could you explain how to configure this ?
@Andrews01878 жыл бұрын
Great video. It'll help me with my math exam tomorrow!
@pleighto774 жыл бұрын
that looks like a 50g app for windows? if So where do I get that?
@luisfelipefusco53067 жыл бұрын
Hey! I really enjoyed the video! Do you know what to do when you create an array but it's in the horizontal position (like 1x3 matrix) instead of vertical position as on your video (3x1 matrix). Cheers mate!
@crclayton7 жыл бұрын
Hey, vertical vs. horizontal lists/arrays are just display flags you can change. I go over the flags I have set in watch?v=HII6X1YRKEc
@DennisReyesCaballero4 жыл бұрын
Flag 98. You can type on your calculator -98 CF and then press ENTER to activate or -98 SF and then ENTER to de-activate
@teuyandishiilangendjoba14573 жыл бұрын
Great video! Can someone please advise? I wanted to know how to store/backup the equations I create with PEQUM onto the SD Card or any other recommended safe place? I had several equations neatly organized after graduating and lost them all when my memory battery died...
@CristiNeagu4 жыл бұрын
Tried this in the HP Prime simulator. It's a better experience to input all the equations, and the output is easier to read. But the funny thing is that "Just a mess" crashed it xD
@Micaeljm6 жыл бұрын
Hello. First of all, I wanted to thank you for making this and all your other videos, they're helping me a lot. I tried your first example and it worked wonderfully on my "real" 50g, but then, for the second example, it gave me the "LINSOLVE Error: Invalid Dimension" over and over again, and I haven't managed to figure out what the problem is yet. I'm on the CASDIR folder inside HOME, on RAD mode, "XYZ" to it's right (not sure what those mean yet), and HEX to the right of that as well (also not sure, but I think this is kinda the "secondary base", or "base to convert to if asked"), on the R ("Reals", as far as I know), ~ (APPROX, but also tried it on = (EXACT)), the variable on the top there is 'X', I'm on RPN mode, and I did set both flags that display arrays vertically instead of horizontally, so as far as I know all the important settings are exactly like yours, and my screen looks almost identical to yours just before asking it to solve, but it doesn't give me a result. Any help is appreciated.
@Micaeljm6 жыл бұрын
Ok, I Googled that error and it seems like it's actually a known bug for the ROM I'm using (Version HP50-C Revision #2.08), so I'll try to update it to a newer one and see if it solves. If I remember to, I'll reply here with the results. Either way, I think this is worth a mention in the description, as probably everyone running this ROM will face this issue.
@Micaeljm6 жыл бұрын
Yay, it worked! I updated it to ROM "Version HP-50C Revision #2.15". Now I managed to make your second example work on my calculator.
@crclayton6 жыл бұрын
@@Micaeljm Thanks for reporting back your solution!
@pleighto774 жыл бұрын
I have version 4.02 build 106 downloaded and a 2.15 version and nope i just got the error on my calculator
@pleighto774 жыл бұрын
Fixed it. i had to be in RAD mode AND inside the casdir under home..AND....NOT use the matrix writer, but do it EXACT entered like you did...it worked but other wise on the real Calc it wouldn't work other wise.
@snowkingplc70934 жыл бұрын
how to you solve for sumation notation?
@quota666 жыл бұрын
How does stack display font gets so small? Cant get mine to do that. Great video though!
@perepalacin41305 жыл бұрын
When i try to create the array the calculator says too few arguments... Btw, how can i make it so that i can see the numbers of the stack (left column with 1:2:3:..) How do i put things into the stack without pressing enter?
@nodn37463 жыл бұрын
This is dependent on your calculator mode. In this video he used RPN, you are probably using algebraic.
@henrereyneke81776 жыл бұрын
Hi. Can you do the same equations in algebraic mode?
@acm78925 жыл бұрын
can you use trig values such as cos(DMS) in system of linear equations? i can't figure this out.
@pachecogomezfrandiop8 жыл бұрын
thank you so much for the video. How can i get all of possible solutions with mslv solver?
@crclayton8 жыл бұрын
You can try providing different first guesses and re-running MSLV, but other than that I don't think you can.
@ChrisBorchert8 жыл бұрын
Thanks so much for the video! I have one quick question that I've been unable to find the answer for elsewhere: My HP50g sometimes has extra brackets in the solution when I use some of the solve functions. For instance, the calculator may output V0=-(4*V1-5*V3) as a solution, and although this is correct, I would prefer V0=5*V3-4*V1 and I am prone to making simple errors in later hand calculations when the solution is more complex and I am rearranging it myself. Is there a system flag for this? Using the simplify function seems to have no effect.
@crclayton8 жыл бұрын
Try checking flag 114. It simplies the brackets in you example equation, although I'm not sure it'll work universally.
@ChrisBorchert8 жыл бұрын
No way, that worked! Thanks for the quick response, I have an electrical exam in a few hours and this will help.
@sebastianjohnsonamorrortu95718 жыл бұрын
Hey you are a cowboy with the emulator, how do you switch approx symbol mode that fast? What's the shortcut?
@crclayton8 жыл бұрын
Right-shift and enter simultaneously
@sebastianjohnsonamorrortu95718 жыл бұрын
Thks man!
@antonioramiro54058 жыл бұрын
with complex numbers?
@Kiatirie7 жыл бұрын
Hi, this was very helpful! If I had an equation, let's say 3x + 4y = 18, how would I graph that? I've only been able to graph equations where Y= (somethingsomething x), and I'm not sure how I would graph equations where I can't easily just manipulate the equation algebraically to isolate Y.
@crclayton7 жыл бұрын
Put that equation on the stack and press Y SOLVE, and it'll isolate Y for you.
@Kiatirie7 жыл бұрын
Oh thank you!!
@retniery8 жыл бұрын
How could I make a soft custom menu
@DennisReyesCaballero4 жыл бұрын
Flag 117. Type on your calculator -117 CF and then press ENTER to activate or -117 SF and then ENTER to de-activate
@srikarsiripuram72288 жыл бұрын
When you are doing the system of linear equations, what is the purpose of the three that you entered at the bottom of the stack?
@crclayton8 жыл бұрын
That tells the calculator how long the array is. I'm putting htree equations into an array, so I put three on the stack then pressed ->ARRY
@srikarsiripuram72288 жыл бұрын
Thanks!
@Micaeljm6 жыл бұрын
I'm having trouble entering your fourth example on RPN mode. The first equation went well, but on the second one, I managed to get (3*X)/Y on the stack, but once I press the square root key, it turns it into 1/|Y|*SQROOT(Y*X)*SQROOT(3) which I suppose means the same thing as SQROOT((3*X)/Y) but it's not nearly as pleasant to read or to work with. How did you manage to enter that on RPN mode? Any help is appreciated.
@Micaeljm6 жыл бұрын
By the way, I managed to enter it using the EQW tool, but I managed to enter everything else without using it, so yeah, it feels like cheating... Knowing how to enter it straight away on RPN mode would be much better, IMO.
@DennisReyesCaballero4 жыл бұрын
@@Micaeljm I updated to the ROM to Ver2.15 and I tried all the exercise using the Eq. Writer and pice of cake....success and full operational.
@gravitycat47776 жыл бұрын
I found you'd be much better of using a program called SOLVESYS than having to put up with the quirks of the stock solvers.
@DennisReyesCaballero4 жыл бұрын
The SOLVESYS is a monster program, the best....recommended 100%