How to Solve IP Camera No Link Issue on Hikvision NVR

How To Reset Hikvision DVR to Factory Default :
• How To Reset Hikvision...
How To Share Hikvision Device to Another Phone :
• How To Share Hikvision...
How To Connect Wifi To Hikvision DVR :
• How To Connect Wifi To...
======================================================
This Video Will Explain How to Solve IP Camera No Link Issue on Hikvision NVR. In this comprehensive troubleshooting guide, we'll show you how to resolve the "IP Camera No Link" issue on your Hikvision Network Video Recorder (NVR). If you're experiencing connection problems between your IP cameras and NVR, this video will help you identify and fix the issue.
We'll begin by explaining the common reasons behind the "No Link" problem, including network configuration errors, faulty cables, and IP address conflicts. You'll gain a clear understanding of the potential causes, enabling you to effectively troubleshoot the problem. Next, we'll guide you through a step-by-step process to diagnose and resolve the issue.
======================================================
Hikvision Software Download Portal : bit.ly/34goKMd
Hikvision Tutorials : bit.ly/43hdRXg
Hikvision Troubleshooting : bit.ly/3MLABHB
======================================================
If you found this video helpful, please remember to subscribe to my channel, give it a thumbs up, and share it with your friends on social media. Thank you for watching, and see you in the next video!

[@HikvisionUpdate]

How to Resolving the Hikvision DVR Offline Issue : kzbin.info/www/bejne/qoDYi6KXfclgpLs

[@olaoyejohn8628]

Actually I enjoyed the message on this video, and hopefully it will solve the equation at hand. But sir, kindly give more explanation on SADP tools. Thanks sir

[@SANJA-NANENANe]

Thank you so much

[@nana_hacker]

Will nvr work display to the monitor with or without the router without going to change ip configuration?

[@user-uj4ov4tg8h]

Great video! I have an Eero and cannot find the Lan Lan isolation. On the SADP tool all I see is my LTS NVR, no cameras? How would you fix this issue? Thank you!

[@isaacusman4098]

I have a Poe switch to my 32 channel NVR and some cameras are going on and off, saying network unreachable and are working well

[@user-cy1gz9iv4z]

你好，想寻问电视屏幕看的到，电话看不到，要如何解决😊

[@robertmonroe9728]

I would strongly appreciate your help. I have hikvision camera connected to the router and white IP address. Port is forwarded. I can see the video in my phone ivms4500hd through internet. But when I use same settings in my hybrid dvr (there are two ip channels available), then I get IP exception. Any idea? Do I must have dvr and ipcam in same network? Does it mean remote camera connect through internet is not possible?

[@HikvisionUpdate]

Yes, if your ip camera not on same location, your ip address should have public ip address

[@northwanderer800]

i have router connected to internet and nvr connected by lan and only 1 of 12 cameras show up... they are meant to be plug and play seeing they are all hkvision cameras.. i just dont get it... why is the experience so bad from a trillion dollar company. They all have ips allocated by the NVR, all ethernet lines were tested as working. I just dont know where to go from here.

[@Sparkling_stardust_Studies]

Question? If no electricity’s and WiFi went off and loudly beep coming out. My IP cameras still recording?

[@user-mv9ir7rf5i]

Hello i need help!!!!! I don't remember the camera H256+ hikvision password, how can i reset with SADP??? The software doesn't reconize camera!

[@princekhan4216]

Im installer and have don one project of hikvision ip cameras but sum time caemras online and some time face no link issue even nvr every time online and i face this problem just in one that project and my 10 year experience so now i cant understand what I do please help👍

[@HikvisionUpdate]

Check your connection between your ip camera and your nvr. Check cable, connector, or additional hardware that you use

[@noorarsalan2064]

Mine is oppo wifi router don't have same functions... what to do?

[@krishnah.s.thakur9991]

operation failed the address of ip camera added cannot be the same with the system. What to do now?

[@HikvisionUpdate]

You need to set between ip camera and nvr should in the same lan segment

[@gamalabdel-wahab5504]

I have s hikvision system of 8 IP cameras and NVR. Sometimes 8 images appear properly on the monitor but other times one or more shows “no link”. There is no pattern for this problem. Any help please!

[@gamalabdel-wahab5504]

I installed this system for more than 4 years and this problem is always part of my life.

[@kathleenborromeo3987]

How can I go to SADP tool?

[@nigatpex]

Please dear how can i remot view on mobile data

[@HikvisionUpdate]

Cek this video kzbin.info/www/bejne/sJWZY316p5WjgLc

[@mayur8277]

Bro how to connect network to dvr

[@HikvisionUpdate]

Just make sure your nvr, ip camera, in the same router, you can connect using lan cable

[@Ankit_Vlogs598]

Agr no link show ho rha hai to kya camera recording ho rhi hoti hai kya ??

[@dulcerobledo9821]

Cameras said the user name or the password is wrong, what to do now?

[@lightgo7991]

How to resolve this problem: camera is disabled or not connected

[@HikvisionUpdate]

Check your cable connection

[@JeffC-fq1be]

Problem, not "issue."

[@justinjy009]

Camera is detected in sadp tool. But still no link whats the issue?

[@HikvisionUpdate]

Check the ip address that shown on sadp same with ip address on dvr or not?

[@JeffThompson7]

@@HikvisionUpdatei have this issue and the IP address in the SADP tool doesn’t match the IP address show in the DVR. Any ideas?

[@HikvisionUpdate]

Update your device ip address on dvr, make one subnet

[@JeffThompson7]

⁠@@HikvisionUpdatethanks. I am trying to do that but I am not sure I am getting the password right. Do I have passwords for each camera? Are they the same as the NVR passwords? Sorry, I inherited a system from a previous home owner so trying to sort out

[@HikvisionUpdate]

@JeffThompson7 some case, password ip camera can be same with nvr, but the other case, can be different