How To: "SpeedoHealer" V4 Install w/ Programming

Quick install on my 2011 GSXR 600.

[@FreddyG687]

4 years later .. this is still the most informative video out there

[@kenswanson4457]

I agree, very clear and easy to follow! It is the way.

[@MrFDS-nj1gu]

It definitely helped me out. I just did it and what a fast process it was. I haven’t ran the bike yet but my calibration is the same as his and I’m running a 240 tire and n the rear plus my gearing is converted as well to compensate an 18” wheel and appropriate gearing

[@2strokeboys191]

2 years later came in clutch for me

[@molonlabe9602]

I just installed into a Suzuki GSX 150. It was EZ. The unit's couplers can be attached to the speed sensor cable at the transmission casing on the left side of the bike (i sealed them off with a good electrical tape job). It isn't under anything, like the gas tank in this video.. If you're good at feeding cables through a bike, you may not need to remove any plastics on the GSX 150. The control box and coiled up TSM button fit nicely under the pillion seat and the unit works great as long as you carefully follow the programming instructions. This video was great for giving the confidence to do it. Thank you.

[@cguzman3685]

Broooo tell me why I installed this device years ago with the help of this video and retired back to ensure my unit was working by watching your video thank you for the great content keep it up

[@Omega47]

That's awesome bro thank you. Ride safe.

[@jeremytaylor5863]

Just fitted to my 2018 Kawasaki Versys 1000 . Used precise app setting set for 105 to 100 kms - Bang on !! love the security of knowing my actual speed , excellent product

[@EzPeasZ]

Great video! Most others I watch don't ever show what I need to see (either it's a shot of their back, too far away, edited out, etc), but it's the small things like figuring out how to actually unplug the thing that always gets me lmao

[@Omega47]

That was my motivation. I feel the same way 🤣

[@OzarkHillsRider]

Great video. I'm installing my Speedohealer tomorrow. Now I know how to do it, Thanks..

[@johnpctech7473]

Best video for SpeedoHealer..Thank you sir!!!!

[@GSXRob750]

Dude 2 am video DIY are the best haha! Nice job man!

[@Omega47]

Yes sir! Alone time!

[@longjonwhite]

BIG thanks for this bro. Now I can order one with confidence.

[@tylerrue3108]

Thanks, man! Super helpful. Now I can out and buy one without worrying about how to do it.

[@Omega47]

+Tyler Rue It is super easy, takes minutes. You will laugh,lol.

[@BrokeassProduction]

Big thx for your video bro😎👍it really help me out and the installation was so easy to do😊👌

[@vr___46]

Very good explanation. Bravo

[@dougieclark3904]

Tremendous instructional video. Thank you.

[@RevBomb]

nice broddy I'm enjoying these do it yourself shits pretty dope

[@aaronham5881]

simple, easy, great video

[@repsollifewhataride2567]

You did a great job bro thank you

[@mr.s.9115]

A great video thanks for that. Just a note, when you spin the rear wheel it sounds like the rear wheel is out of alignment, or maybe wrong sprocket combo for size of chain hence the clicking sound.

[@marcpotvin1650]

Great video

[@Jms4ntana]

Awesome video, thanks!

[@ionootz83]

Legend

[@nicolash.9222]

Hey nice video, just a question : Did you have to cut any wires of the hareness in order to install the Speedo ? Because I just saw you plug 2 connectors onto the gear sensor's black ones but no wire cutting which looks good imo. Thanks.

[@Omega47]

It is all plug and play man. No cutting. Great investment.

[@nicolash.9222]

@@Omega47 Yeah I can see it, I had one on my previous bike (Kawi Ninja ZX636R) but because of the "universal" harness, I had to cut some wires... I hope the installation will be the same as yours on my upcoming '06 Gixer 750 😏

[@RJ_Slidez619]

Lmao the “whys it gotta be black” killed my black ass 😂😂

[@Omega47]

LOL. Thanks for having a sense of humor.

[@seatime674]

​@@Omega47.. Another crazy comment, I'm new to these. So this physically changes the position of the needle itself in the speedo instrument cluster to read correctly or is this just for digital speedo's??

[@Iseekoutthetrails]

nice and easy.

[@Omega47]

+1down4up Very,lol

[@folerx]

is it better to have more gps speed, maybe 200kmh or is it irrelevant? OE speedometer is not linear, more speed less correct is.

[@scott3065]

Isn't it a must to also program the threshold speed "U" in order to get an exact speed displayed within the set limit (U)? 🤔

[@Omega47]

🤷‍♂️

[@defeatedeye7693]

so this will still work even with stock sprocket size, cause i just wanna fix the factory error

[@Omega47]

That is correct.

[@BIKELIFEANTONIO]

Help I did this on my 08 gsxr 600 and it's not working I follow the instructions but my speedometer it's on 0 and when I did the test mode and spin the tire it doesn't do anything please help

[@hogfeeder7680]

So, my bike is stretched +9 inches. Does this have any effect on the gearing, or only the tooth count of the sprockets?

[@christopher5468]

If your bike is like it is from factory its about correct. The factory is not 100% on the spot but close.

[@Omega47]

I believe it is tooth count, have a friend pace you on their bike and see.

[@ErzaRosenberg]

Stretch doesn’t change the speedo. It only makes you GAY

[@emokiid7742]

How do we accurately measure our speed? I’ve just installed this and I did the exact same on my cbr650f. I went from 15-42 to 14-44 and compensated for factory error… is there a way we can see if we’re really going the speedo our dash is telling us?

[@Omega47]

Really the only way is to have a friend in a car pace you or use the GPS on your phone. Best way to confirm how close you are really.

[@louisajansen7743]

I got the same bike and wanting to do same gear ratio as you how was the difference from stock good noticeable difference?

[@emokiid7742]

@@louisajansen7743 what year model is your 650f? Is it LAMS or full power? My bike is full power and with the new gearing 14-44 the bike accelerates faster than before I can power wheelie in first gear and clutch up wheelie in second gear is easy. The dash is also showing the correct speed with the healtech speedo healer I’ve installed

[@louisajansen7743]

@@emokiid7742 mines 2018 and it’s full power and had a dyno tune on it but yer wanting do sprockets next so might do same as yours

[@emokiid7742]

@@louisajansen7743 Ye too easy -1 in the front +2 rear and you’re set to go! It’s wise to replace the chain also!

[@wuzza1960]

Is that the SH S01 plug ? I bought a speedohealer and they sent a SH U01.......you have to chop the wires...I sent it back

[@Omega47]

Mine was straight plug and play. No splicing.

[@patw9175]

Wish it was this easy on my gsxs lmao

[@zsoca851]

Hello! If I remove the battery from the engine, does the module need to be programmed again?

[@Omega47]

It should not. When you reconnect the battery, same as when you turn on the ignition it should display your settings when starting.

[@zsoca851]

@@Omega47 I understand Thanks for the answer.

[@molonlabe9602]

I think it has solid state memory which doesn't erase when power is disconnected. I programmed my box, disconnected the cables to it, reconnected them and my settings were still in the box. You have to press and hold both buttons until an "E" displays to erase programming. It works, I tried it.

[@tonytoneton2pac966]

Where'd you buy yours at.

[@MrCODEmaster00]

What about the TSD feature? How do I use the "TSD" to remove speed limiter on my bike?

[@Omega47]

That's a feature I didn't use so I can not comment. I am sure the supplied instructions or the app can show you by now as this is a few years old.

[@MrCODEmaster00]

@@Omega47 Okay, thank you, all I could find was a PDF of the manual saying this: " You can set the TSD unit to either ‘freeze’ the speed signal to the ECU at a specific threshold, or apply a stronger calibration value so that the speed signal will be increased at a slower rate above the set threshold. " So I don't know what exactly that means, thank you for the response though.

[@shizukodream]

Is that the rear wheel I need to measure o. The app??

[@Omega47]

Yes, just get the size information from the sidewall.

[@shizukodream]

@@Omega47 thank u! My last question is would it stop my code 25 on my ninja 400 because I change my sprocket size??

[@chrisreese2965]

Let me get something straight. This well make your odometer count correct aswell, right?

[@Omega47]

Correct.

[@fordmustanggen5]

Will it automatically correct my mileage? Like the bike I bought has 10000 miles and is running a +1 tooth sprocket in the rear. Will it change it to 9xxx miles? Or is the damage of false mileage done? lol

[@Omega47]

Damage is done, it corrects the speed being read. Therefore mileage will accumulate correctly. If you have accumulated false mileage to due a false speed reading that is permanent. That is why I got it immediately.

[@fordmustanggen5]

Gotcha, thanks for the info man.

[@markwitham6784]

Im doing this tomorrow,,,but my speedo on my zx14 isnt digital, hope it still works

[@Omega47]

Still should be using a digital signal from the speed sensor. The Healer will be in between that circuit.

[@markwitham6784]

@@Omega47 Well the installation went well, hardest thing was to undo that black speed censor,( bloody thing) i looked up the

[@markwitham6784]

Cont.....Speedo healer calculator, and followed the prompts. When i turned on the ignition,the speedo went up to 140, so going by the directions, as long as it moved off 0 it should be fine. My sprockets are 16f ,,41rear, so my code was 0,2,9. Havnt ridden it yet, but it should be fine. Thanks again for the info. Mark, in Australia 👍👍

[@markwitham6784]

Well some bad news is that when i took it out for a ride thismorning, its runming rough as guts in low range. Juttering like its,outa tune. So i went home , disconnected the two plugs from the speed censor unit and went back to standard mode,,took it round the block, and it runs smoother!! Dont know why ? The only thing i didnt do on installation, was conect that other lead to the unit. Do you have to?

[@orionnocap]

@@markwitham6784 how did this end up working out mate?

[@phantomsean1]

wish they had something like that for cable speedos lol

[@Omega47]

+phantomsean If only!

[@phantomsean1]

yea i had to adjust that cable for hours and driving past a speed trap thing like 20 times lol

[@VoidedWarranty]

they do! it's actually a lot easier and costs nothing. Note how far it's off, take the lens off the speedo, jump the needle over the stop and mark where it sits at rest. Pull the needle straight off the shaft, and reinstall it, offsetting it by about how much it's off by. It's an adjustment instrument repair shops can do for you as well.

[@SipePerkele]

I bought k9 gsxr 750 with speedo healer v4, where can i find this app?

[@Omega47]

Speedo Healer Calculator in the app store.

[@zgarmy61]

I just installed one on my 2006 gsxr1000 and now the speedometer reads 0 constantly

[@Omega47]

Go through your connections and controller set up again. You may have missed something.

[@OKNERO]

the app makes this look easy. but unplugging those little tooth plugs is a bitch haha

[@Omega47]

+NINJA NERO Easier than you think,lol.

[@Renee_Lopez]

How accurate was the estimate?

[@Omega47]

100%

[@Nick-wx7tv]

Can you use the speedo switch between miles to km?

[@Omega47]

Nick S. The Speedo itself I believe you can set it to kilometers. That would be unrelated to the Speedohealer though.

[@Koz6336]

Does it still hold up?

[@Omega47]

I have since sold the bike but no issues until then. Last I heard everything was great.

[@JIMIXC]

Does this work on atv?

[@Omega47]

That all depends on the ATV I would suspect. I would consult the website for information.

[@dubzy-ztp6030]

Nobody shows how to set up for track use on the second channel to remove speed limiter. And also show how to change between the two.

[@Omega47]

Never saw that option. Also if the speedo continues to read the ecm will limit speed not the healer. That's a first I have heard of that or it's a newer feature since then. I still see the ecm playing a role if the speedo is still accurately measured.

[@dubzy-ztp6030]

@Omega47 finally found it! I've been looking so long for this lol

[@BIKELIFEANTONIO]

This speedo healers universal?

[@jordangreenhagen8380]

Kinda but they have a way of knowing which one for your bike.

[@superheroactionforkidstoys7427]

Anyone know exact name of app

[@Omega47]

Speedo Healer Calculator.

[@jdmcarboy64]

There's your proof for you 600 riders that swear your stock 600 did 160. He's set accurately at 151mph

[@podjo2k9]

Maybe or he dropped 2 teeth one one on front get more bottom end but u are right they can be way off brother

[@buisnessemail9109]

Idk man my shit is 100% accurate and topped my r6 at 167 stock gearing

[@ke42rich]

my 2018 GSXR600 tops out at 167 also, with my speedohealer and stock sprockets.