How To Spray Paint a New Car Fender At Home

WAX AND GREASE REMOVER www.amazon.com...
SHOP FAN www.lowes.com/...
SHOP FAN www.lowes.com/...
SEALER shop.thecoatin...
PAINT GUNS www.walmec.com...
#GRANT7
#HOWTO
#PHARRAWAY

[@rgomez5683]

Can i use the red pad to scuff a new bumper aswell?

[@splash5974]

Yes. Unless its raw plastic! Then red is too aggressive and you will have to use grey pad with scuff paste. Then seal it when you are done.

[@rgomez5683]

@@splash5974 thanks

[@SprayWayCustoms]

Great work and video Pharraway 🤝

[@PHARRAWAY]

Thank you so much 😀

[@ANDY-we7mr]

Hi mate brilliant video thanks for sharing that very well explained

[@bigsquatchsasfoot1964]

I’m jealous it was 95 degrees there ! It was only 10 here in the UK 🤣

[@robertthrem3382]

Paint the inside first I’ll hang mine with hooks

[@dianelee2100]

The clearcoat is bubbling on my Honda Civic. Can I wet sand it? What grit? Thanks. It's just a out in weather driver

[@PHARRAWAY]

You can email me at [e-mail]

[@Demastrify]

looks good brother

[@juanarmenta1515]

Buen

[@splash5974]

Looks good bro! I really like that Walcom.

[@billgroel4463]

Good job thank you for sharing stay safe God Bless 👍🇺🇸😎

[@PHARRAWAY]

Thanks, you too!

[@ceesklumper]

Just in time. Have to paint my new rear Volkswagen fender tomorrow!

[@thekevorlando]

Hey there man I'm enjoying the content but I do have a question I'm assuming that the materials have improved since I was doing this with any regularity but I was always taught you should shoot a panel the way it'll hang on a vehicle a door up and down offender up and down and so on is that not necessary with the new paints and clears thanks keep up the good work

[@davidharrison8397]

Another great video .....nice job

[@vivernpadiachy3528]

If I don't use sealer must I put 2k primer sand it and than spray

[@PHARRAWAY]

Yes

[@johnsmith-qz4bv]

great video

[@Turbovanilli]

Could u also use regular primer or etch primer? Or is sealer another name that can be used for primer

[@PHARRAWAY]

sealer is primer but don't need to sand it

[@martinjay5906]

Can I just sand it instead with 240 grit on a hutchins 4500?

[@PHARRAWAY]

240 will be to aggressive if your using the 4500 go with 320 or 400

[@luismorales_1991]

Yes Sir! Another great video!

[@JustMike2791]

How long can it be in sealer before painting? A day, week, month? If it didn't get my truck painted after sealer for a week or two or twelve, would that be OK? You're a good teacher, thanks for the video.

[@jaydotseedot]

It can technically be in sealer indefinitely. You just have to clean it then scuff it before applying basecoat. When doing it all at one time it chemically bonds to each coat. When you have time in between sealer and base you need to scuff it so the base mechanically bonds to the sealer.

[@JustMike2791]

@@jaydotseedot That's exactly what I needed to know. Thanks for taking the time.

[@orlandoperez5968]

Im trying to paint the fender of my truck on my own , i have the tools & everything, i would love to learn new skill , so practicing on my own truck would be a good way to start. Would it be necessary to do a light scuff on it & wipedown after the sealer make sure is smooth ? or no ? Also when you do the mixing , what would be the measurements ?

[@orlandoperez5968]

or sanded down after sealer ?*

[@PHARRAWAY]

Yes sand it down first and about the mixing it depends on the brand paint

[@zefti4980]

Do you think i can get same results without paint gun

[@PHARRAWAY]

Yes you can just use good rattle can paint

[@williammarshall3193]

How can I get some of that grant 7 clear.

[@PHARRAWAY]

Go to buycustompaint.com

[@srtjdm1458]

How much was that spray gun carnal?

[@PHARRAWAY]

this one is about $400

[@frankrodriguez1977]

Very nice job. Thanks

[@PHARRAWAY]

Thanks for watching!

[@jron5113]

Do u paint the inside of the fender?

[@PHARRAWAY]

Yes

[@ericgonzales194]

Is that fender already pre primed From the factory?

[@PHARRAWAY]

They come with E-coat

[@ericgonzales194]

@@PHARRAWAY got it thanks

[@chespimorales4881]

Nice job bro.

[@PHARRAWAY]

Thanks!

[@eksine]

dude you are a beast! your fluid is wound out so much you smash the paint on in 1 pass! for me I try to close down the needle and go slower with more passes. it's probably the wrong way but I'm not a seasoned pro so I wanna see if my slow turtle way is gonna work for me

[@thirdcult101]

Thanks for taking the time to make another clear and concise video!

[@PHARRAWAY]

Glad you enjoyed it!

[@alienproductions9948]

Could you please tell us what the stand is that you put the part on for spraying? Thank you for a great video.

[@nearheaven5311]

Excellent job!!!

[@garyvs.carsmore4607]

I always enjoy your work. A great channel! Gary

[@PHARRAWAY]

Thank you so much 😊

[@lschneider6109]

Got my decals the other day and they are sharp brother, thank you!

[@PHARRAWAY]

Glad you like them!

[@leoestrada5624]

Man good job .....👍👍👍 Animo

[@broadcasttttable]

What about the edges resting on the stands? Aren't there small areas of edges that don't receive the paint because they're on the stands? So do you finish painting what you can, wait for it all to dry, all three coats or whatever, then come back and hit the edges that didn't get full coverage? Thanks.

[@PHARRAWAY]

It's very little that doesn't get paint hardly noticeable

[@ericohman]

How did you setup the fans. Did they push air or suck? I see you had some venting holes on the other end? Want to elaborate? 🙏🏻😀

[@PHARRAWAY]

It sucks it out

[@bengkelalam1936]

💪💪💪

[@rollthers3157]

Always satisfying seeing shiny new paint being applied! 😀

[@PHARRAWAY]

I totally agree!

[@sinformant]

Do you save the jagermeister for use on bmw's, mercaedes benz's, vw's,and porsche's?

[@PHARRAWAY]

no I dont sorry

[@MarclenChin]

I see some Jaegermeister at 1:25, do you use it as a paint thinner? LOL Love the video man.

[@PHARRAWAY]

Lol no I use it as a paint stick holder

[@UndergroundPaintKing]

Nice work bro!

[@PHARRAWAY]

Appreciate it!

[@husky1232]

I like these short videos I learnt to spray my first car wing in the 10 weeks course in college thank you for your channel always watching out for your next video stay safe farraway

[@PHARRAWAY]

Anytime brother

[@DT-lg6fd]

Great video , the video on polishing was very helpful too . Question : what brand of paint did you use ? Thanks

[@PHARRAWAY]

Urekem, ppg,HiQ and robero

[@DT-lg6fd]

Thanks for the fast reply Buddy .

[@lawrencepatterson]

🔥🔥 glass

[@ajd5363]

To paint the inside of fenders, do you hang them to do both sides at once?

[@PHARRAWAY]

Yes its the best way

[@larryb2905]

Thank you for sharing your true skill and craftsmanship!

[@PHARRAWAY]

Thank you very much!

[@zefti4980]

So nice

[@juanarmenta1515]

Burn trabajo amigo👍✌

[@v8man350]

Great how to tutorial video, thanks for sharing 👍🏻

[@PHARRAWAY]

Thanks for watching

[@stevessaws3612]

Good job mate

[@robsautobodyprofessionals7909]

That gun works nice bro

[@PHARRAWAY]

Its an awesome gun brother

[@BLACKRAIN390]

👍👍👍💯

[@Multi-Skill-Bill]

Two thumbs up brother!

[@PHARRAWAY]

Much appreciated

[@sinestro55]

Great job👌👌

[@PHARRAWAY]

Thanks a lot 😊

[@Supanova70]

What was your air pressure 35? sounds strong. Great job

[@PHARRAWAY]

Base was at 28psi and clear was at 33psi

[@bigmacklargefries]

Should have blended with the door