HOW-TO Start a nitro engine after long term storage

How to start rc nitro engine when your rc nitro engine won't start because it's been sitting for a long time. So if you're having trouble starting a nitro engine or you don't know how to start a nitro car after a long time, watch the video above. If you have any questions or comments leave them below I always reply.
SUMMARY: Video on how to start nitro engine that's been sitting for months.

[@R0V0lv0]

never mind two years. I just managed to start my dads old kyosho nitro car which hasnt been used in 12 years XD

[@malicious81]

I'm about to do the same thing with my Kyosho DMT later today. Wish me luck.

[@1slowe60_9]

Same man waiting on my parts to arrive i have some old fuel and it didn’t turn on so hopefully with new fuel it will make a difference

[@thewizard3770]

1 slow E60 _ with fuel that sits a long time... Just shake it real good for a minute. 👍 it becomes good again. Smell it before....then after. You'll smell the difference !

[@richlincoln1824]

I have a hpi savage x 4.6 and I haven’t ran it in probably 12 or more, I’m doubtful it will run 😬

[@scottmacdonald7667]

Dude my Revo 3.3 hasnt ran in 10 years! gonna give it a go! Great work getting your dads rig going bet that felt good.

[@oldskoolhunting]

Hey it’s just my opinion but I have to say you being you is just as entertaining as the nitro gang character…. Very easy to listen to and very professional!!!! Great video, I’ve spent my day working my way thru most of them 👍😀

[@hybrid32494]

hey man! how you doing! Yes, this whole video is very unique, it was recorded in ONE SINGLE take, without any editing at all. It was highly improvised but came out quite well. I'll try to create a balance going forward, thanks for the comment my dude! NitroGang!.. In fact, hold on, im gonna watch this video myself now, lol..

[@michaelinzitari]

Using up all the fuel is great advice. Also immediately after it stops use the pull start to move the flywheel to BDC (out of the pinch zone) This protects your sleeve and helps the next start

[@greg20152015]

Just bought this for my son for Christmas. Very helpful man. Thank you.

[@hybrid32494]

Congrats, glad to help btw. Any issue with the nitro startup and break in, let me know, ill do my best to follow up.

[@DanielFerreira-qq8hb]

Neken

[@tonycable4560]

Just fired up my Kyosho MP5 (circa 1995 - restored in 2010). After 4 or 5 years of sitting in my garage, it was a bit stiff, so I had to put in some oil and let it spin on my starter box for a bit to loosen it up. Running like a champ now - screams like it should.

[@evhexrc1765]

Thanks for the advice! A friend and I are wrenching on a ravaged tmaxx that is the oldest make from traxxas from when they first made it. It's giving us a lot of trouble tight now. It's his neighbors, and he might be having me do a brushless conversion for him

[@hybrid32494]

Hey buddy!!! I used to have a few t-maxx's, miss them too. I was trying to pick one up for a brushless conversion too, but it seems like you would need a lot of work to make that happen, it's easier if you just started of with the E-maxx. For one, you need a totally diff trans, without all the one way clutches and two speed. BTW on the t-maxx have you gotten it to run?

[@evhexrc1765]

hybrid32494 not yet. Not really. We had it for a bit but something is just really messed up. Some guy had given it to one guy, then that guy gave it to my friend’s neighbor, and he doesn’t know what to do with it. My friend and I decided that since his neighbor has never had an RC before, he should start with an electric setup. I’m going to do a brushless conversion for him so he can use that for now, then I can put the nitro stuff back in for him when he has gotten the hang of the electric. I’m still thinking about what electronics to put in it. What are your thoughts on all of that?

[@emmettuhlir3272]

EvHexRC 1 I would look for a electric conversion from Kershaw designs or Integy. As far as motors go, a decent 4s system would be great in a classic tmaxx. A 6s system would likely destroy the older style transmission used in the tmaxx. Reedy sells a 4s motor and esc combo used in their Rival monster truck. Its a good system made my a company that has lots of experience. As a final note, I would definitely recommend taking care with the transmission. You can still use the nitro set up and have it shift for reverse, and use mechanical brakes. In the long run, it might be better to purchase a newer emaxx. It would still be a very fun project, classic Tmaxx trucks are a really good platform.

[@hybrid32494]

Im pretty sure the stock T-maxx trans would be destroyed ASAP with even a basic 10th scale brushless system. You gotta think back when this truck was out it had a traxxas .15 engine, that made less than 1 HP. As you say, the e-maxx would be the way to go, especially the old two speed shift on the fly version (I used to have).

[@MR5er1]

I had one in storage for around four years.. I'm in quarantine at home so I took the time to completely disassemble and clean the engine with two stroke mix, now it's like new! It had old fuel inside it and it had gummed up the carb and the fuel tank

[@jamesphillips9750]

Excellent video sir,very informative for me just got a Redcat,thanks.

[@hybrid32494]

thanks for watching!! I love that 2-speed, when it shifts you just get happy, ahaha. Let me know if you ever need any advice on tech help, I love that kind of stuff. Plus check out my other vids, I've recently been doing alot of gas 1/5 rcs too.

[@chris929rr7]

Good advice right there kids! If the fuel was drained and the carb emptied on the last run shutdown (sqeeze the fuel hose shut to shutdown dont use the finger over the exhaust method or it will leave old fuel in the carb.) then id should sit for as long as you like and fire straight up like a well maintained dirt bike. I hardly ride anymore getting old not interested in getting hurt nothing to prove so the bikes sit for up to 2-3 years at a time. No problems starting them either. Just make sure to empty the carb otherwise old fuel turns into varnish and clogs carbies. Nitro engines last 30 years if you look after em. I plan to be one of the few who can still pull out his old tmaxx 30 years later. Hell its already been bout 15years and until I get my XMAXX its still my go to basher!

[@hybrid32494]

hey buddy! thanks for watching! These nitro engines will never die if you take proper care of them, you got that right! I've got Vintage HPI nitros that still run like new from around 1997. T-maxx is king my dude! It's one of my fav nitros ever. I have a 3.3 model personally. Check out my channel for some awesome nitro rc content in my newer videos, it would sure make me happy knowing a true OG Nitro RC fan is here.

[@orcnic]

Good honest video..made more sense then most out there..keep goin bro!!

[@hybrid32494]

thanks man!!!

[@Unfinished_sentenc]

This was cool! I never knew they had an extra gear! Times are changing! Awesome, Thank you

[@hybrid32494]

hey buddy!!!, Yep, the 2-speed is neccessary to add some cool factor to any nitro RC. When they shift, it's just so cool sounding. I have newer vids on my channel where you can see the top speed of this and the 2-speed changing.

[@Unfinished_sentenc]

hybrid32494 Thank you brother. I’m searching now, that stuff is awesome!!! Much appreciate your time, too

[@hybrid32494]

you got it!! anytime. Check my channel for the way a. 2 speed traxxas revo sounds like. So nice.

[@Unfinished_sentenc]

hybrid32494 what’s the link I can’t find them too many videos. Thank you very much! Appreciate

[@hybrid32494]

here you go. these are top speed runs where you can clearly hear the 2 speed shift. kzbin.info/www/bejne/iYHGZJmLlsxrrrc

[@toyota218921]

Thanks for the info👍👍

[@yaquelinaguilera13]

My nitro rc buggy sat for 8 weeks only because I haven't order a servo and then it broke the power switch but now I factory reset it and it starts I'm so happy

[@MarioFilippoRJ]

Thanks for the video and for the advices!

[@hybrid32494]

no problem, you got it, thanks for watching!!!!

[@gerardoherrera9254]

Thnx 4 d advice, I'm on the process to buy a volcano s30 4x4 ,I don't know nothing about it, thnx 4 ur video 👍👍up

[@hybrid32494]

you got it!!! let me know when you get it and how it goes. These are pretty tempermental, but when they run well it's super satisfying.

[@zekezzekekan2144]

Great videos bro you're going to be at 10 k before you know it. You have a new supporter here.

[@hybrid32494]

hey my dude! It's 5 years later and I've hit that target and more! What matters most is the amount on nitro RCs I've restored and made great again!! thanks!

[@MultiBLINK21]

Thanks learned a lot

[@mikewhittington144]

When the pull gets tight the compression is just right

[@SargeScum]

Amen brother

[@zingzing_media]

Attempting to start my first nitro car tomorrow I bought it for £20 second hand I have a new glow plug and glow starter hopefully I will succeed haha thanks for posting this 😀😀

[@hybrid32494]

hey man!! Welcome to the NITRO GANG!! Good luck, and let me now how it goes or if you need any help and advice. Most important thing is lets hope the fuel system is well sealer and you have no vacuum pressure issues.

[@zingzing_media]

Cheers for the reply pal haven't actually tried it yet couldn't get hold of any guel lol but it all looks clean and pipes look ok so hopefully it'll work 😀😀 I'll let you know how it goes cheers pal 😀😀👊👊👍👍

[@rcsendandblast1579]

I went to the store yesterday and found a roll or Mason String for marking properties or anything for that matter. I’m not sure how long it was but for 10 bucks I have pull start string for my entire life. That little guy started great 🤘😎

[@hybrid32494]

hey bro! terrific idea! You know, I once use a thin parachute cord for a pull starter sting. It was worked well and not ripped since. anything to make out nitros great again right bro!! Sickening!.

[@rcsendandblast1579]

@@hybrid32494 for sure bro I finally got me hands on a version 2 flat blue pants rc10GT model it had all Steele transmission gears and hardened Steele spur and bell. All stock originally shocks with the original plastics on the car except my old school black yup body that I had to use. It’s sickening just 1 thing I can’t get but I believe I’m narrowing the loss of traction to the wheels the issue may be the collet May be needing some love on in the flywheel. I swear the crank is turning when the flywheel is not at times. 🤘😎under hard loads but dang it’s coming together sweet thank you bud for your support 😊🤘

[@pigeon-uc9wo]

Brilliant mate thanks 👍👍👍🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@royarsey5429]

same as my starter nitro..but buggy "Forza" 2-speed now i run 1/8 racing buggy. Nice demo..!

[@hybrid32494]

yep, basically any nitro engine will be the same. Thanks for watching!!!

[@frank.l181]

Prior to long term storage, I did put 6 drops of after run in the carb. But the carb got gummed up from the fuel, it got stuck in full throttle. I had to use mineral spirits to free it up. I like to to heat the cylinder head with a micro torch to 160° for way easier starting.

[@charlesmcgehee3227]

I always use inline filters. Hey I had a car that had not been run in 15 years. The owner did not use after run oil. I pulled the head and air fiter. Got some CRC Throttle/carb boby cleaner from a car parts store. Sprayed it id, cranked it over and it freed up. It was gummed up bad. But after a 1/2 tank idle run, I sprayed it out again, upside down. Dumped he fluids out and the engine lit up light new. Quick way to avoid a complete tear down. It won't always work. But usually does fine on small engines. I use the same glow starter with the meter. I joined your channel. Nice video. Sweet car. Don't flip it and scratch that head. BODY ON!

[@hybrid32494]

hey my dude!! welcome to my channel, hope you check out and comment on my newer videos, they are much battery than this one. I still have this nitro BTW, and it's still going strong.

[@magia5035]

Thanks I get a jato 3.3 soon. Yeah and can't wait. I want max power

[@ryan14r95]

Get you a high pressure air compressor will get that dust for ya(at least most)

[@pongosp]

Very well tutorial

[@camrowdrone6497]

Enjoyed bro 👍🏻

[@hybrid32494]

thanks my man!! this was an oldddd video here. Clearly I had no idea how to edit back then, and just recorded straight up then loaded to youtube.

[@mikewhittington144]

Not to mention after a year or more in storage u half ti do a slight break in run a quarter tank on the bench till it quits that gives the pistion and mechanics the lubricant they need to run properly AND efficiently

[@Buntybill1]

I storeed my gv nitro car for 5 years..still had fuel in it..just replaced the fuel tank and lines new air filter..and it runs perfect now.

[@hybrid32494]

Sometimes you get lucky with nitro storage and the engine is'nt rusty after. The issue with leaving fuel in the system is that it will just Gum up eventually and ruin everything, but can generally be cleaned.

[@michealrobinson9778]

Did put after run oil in it

[@fujiwarafanboi6982]

Personal story: got a tmaxx and a revo off a buddy, both motors seized, hadn’t run for maybe 5-8 yrs. easy fix pull motor remove gloplug fill with wd40. Wait a day. Fill again, use vise grips to grab the flywheel and just wiggle it loose and it’s good as new. Almost, you because the afterrun oil gets cruddy, u gotta pull apart the motor so it will run good. Clean the crank bearings with brake cleaner or rc cleaner. And re lube em with 0w- 20 motor oil. Then use that or wd as assembly lube. And your all set, this works on a Traxxas 2.5 and 3.3.

[@giovannigalanti59]

Car is so cool wish i had ine when i was a youth

[@hybrid32494]

thanks!!. are you into this hobby now? if so do you own any nitro or electric rc models?

[@rcsnapon2132]

Cool video brotha

[@805sDjDekon]

The Nitro Gang is happy

[@hybrid32494]

You know it bro! Thanks!

[@mikewhittington144]

My traxxas trx 3.5 big block fired right up after 10 years I built it from scratch it's all about how u store it n the condition u leave it when putting into storage

[@hybrid32494]

hey dude! thanks for watching, You're right, storage with proper after run oils in critical. I usually never have a problem, unless it's a used RC and from somebody else, in which case it's always 100% seized, lol.

[@militantsvgtv2576]

When I tried rolling my car, it didn't roll, only on the back wheel. Any suggestions will be helpful. Thank you.

[@marvinmikha202]

Hi man, great video! I have a redcat tornado and I haven’t used it for almost a year. Today I tried to start it up, and it started up after a minute or two. Then when I was tuning the idle from the controller, I went to low by accident and the car turned off. I tried to start it again, but it wouldn’t start. I shecked the glow plug, charged up the igniter, and tried many times to start it but it never started. Do you have any idea how I can get it to start?

[@maybenotsure5380]

Getting my dad's old one today its been sitting in shed for 10 years

[@bobkinney886]

Just ordered my first nitro truck, Redcat Earthquake 3.5, but very cold here in eastern Wash , so may wait till warmer weather for the break in

[@hybrid32494]

great buy!!!, I have been looking for one of those myself. Great prices on ebay on those too.

[@brandonb.288]

break that bad boy in - the ambient temp will only cool the head quicker, after this winter storm go have some fun and make sure to keep at 25-50% throttle to keep the temps up.

[@hybrid32494]

YUP, unless you literally cant take the cold yourself, the nitro engine will be fine. I've broken in nitro motors and they still warm up well even at low outside temps.

[@bobkinney886]

@@hybrid32494 Been running it like i stole it, now it's broke in, a blast in the snow

[@Martybrown-kc4xg]

Increase idle slightly and a good tip would be to start it on a block of wood or something to keep the wheels raised and this lets the wheels spin freely

[@hybrid32494]

good tip, thanks. To raise the idle I just adjust the throttle trim normally, then lower it when it warms up. Not sure if I did that in this video, but thanks for watching!!!

[@Tony-ow3if]

Very Cool vid👉🏻

[@hybrid32494]

thanks my dude! Lets make nitro great again!!. You should check out my newer vids, I guarantee you will live them.

[@bensheppard7717]

Just started my 1993 Mugen after 30 years of no driving!!!

[@hybrid32494]

hey man! very nice. That would have made a great video for sure. You must have stored it correctly years ago.

[@marrcusc]

Hi! My steering and throttle servos are acting up and are weak and twitch. It's a few years old and I'm just wondering if it could be the receiver or the servos? Appreciate it 👍

[@hybrid32494]

hello man!!! First thing to check is your receiver batteries. Make sure they are new. Do you have a 2.4 GHZ radio? Make sure your receiver antenna is correctly mounted and not somehow shoved inside the receiver box. IT sounds like you got symptoms of signal interference instead of bad servos. Generally the servo either works or does not. Ofcourse you should also check the linkages themselves to make sure they are not binding. Let me know, and I;'ll continue with more advice and checks.

[@say-dq1th]

I will face this situation next week and preparing for the worst! I have a half full gallon of fuel that has been sitting just as long as the car - approx 3 yrs. Should I get new fuel first?

[@hybrid32494]

hey dude, good luck, let me know how it goes for ya, if anything we can troubleshoot. Generally the nitro fuel is ok, just check if it's not separated into it's component parts and still looks well mixed and shake it.

[@benjaminmartinez7982]

Never before seen OMG

[@starguard4122]

No Offense But when I first watched this, I thought this guy was the Actor Shia LaBeouf from the Tank movie "FURY". I thought" Man I didn't know he was into R/C" :D

[@hybrid32494]

hey dude!! ahaha, that's funny. I get that all the time don't worry about it. But I wonder if the real Shia Labeouf is into rc? ahaha. BTW, I just did a 2 part update video on this truck with some awesome bashing, check out the vids, thx!!

[@Merky_Gz]

Guys... It's also cool to get a brushless as it's silent and lighter in weight for most rc's.. I do ride both because it's so different but that new gen' of brushless are banging to'👌

[@nikosnix]

Only this? Just checking the electronics and battery? I have a litle car like this but I haven't start it for 5-6 years. Is it possible to start it or is useless? What else should I do to help the engine start? Any advice pls??

[@hybrid32494]

there is also more to check than I demonstrated in this video. One of the important things is to check for compression or if the motor is seized. Attempt to turn the flywheel, you should feel some tension but it should move with just one finger. Then Check to see if your glow plug works by either using a meter glow starter or unscrewing it and checking to see if it gets red. do this first, then followup with me on here, Ill give you more steps to follow.

[@mjr412]

So when you mentioned about the two gallons of fuel ⛽️ did you mean that particular motor is not usible after two gallons ?

[@hybrid32494]

hey man, if you take really good care of your motors and make sure to oil the filter and never get any dirt inside or overheat it you can easily run 4-5 gallons of fuel. Most people who don't keep up with service on these only see about 2 gallons until they need a rebuild. I still have this car and it's fine, I'm up around 3 gallons on it.

[@JasonTylerRicci]

For the life of me I can never figure out the darn adjustments on the carb (high and low needle/jets). Seems one year I get it going fine, then after storing it over winter and trying to start for 1st time , it's a royal PITA

[@hybrid32494]

hey man!! thanks for watching!! I hear ya, you usually set the LSN and let it be, Issue is with the long term storage is you gotta usually take the needle out completely and clean the carb some, then go back to factory settings.

[@MikeyGG34]

Why don't you blow out the extra fuel,un-hook the carb line, and the exhaust fuel line and blow in the exhaust line,fuel comes out on the way to the carb. This is the same way we would prime the carb with fuel,you see it in the fuel line. Also pre-oil the piston, through the glow plug,turn it over by hand a couple of times. Then get the piston to the bottom of the stroke, before you start it.

[@noahv1916]

To take the fuel out u don’t need to run ur rc car out just unplug the carb tube and the petrol will get air and go back into the tank then once u have done that start your car untill it dies then put wd40 or after run oil both work the same and remember to pime your wd40/after oil (WITH OUT THE GLOW PLUG) so that it gets every we’re in the engine

[@hybrid32494]

Your method works too, but it is not the best. In general it is best to limit fuel in the RC in general, it will eventually gum up the fuel tank and the fuel lines if left in for a long time. I also do not take the glow plug out unless it needs to be changed, or the engine is flooded. If you spray aftersun or wd-40 into the carb its the same effect. Taking out the glow plug each time will increase the chances of dirt or sand getting into the piston and sleeve.

[@noahv1916]

hybrid32494 ehhhhh hasent dont shit to me I’ve been runing my 1/8 for around 8 years and when I do ride it I beat the living fuck outta it still strong but that’s me

[@hybrid32494]

Its possible, but you know its all about risk, all it takes is one grain of sand to get in there, and its done. I just try to limit unnecessary unscrewing of the glow plug as much as I Can. You might have a very good engine too, what engine do you run?

[@noahv1916]

hybrid32494 I don’t think it’s a good engine might be wrong but it’s off a old thunder tiger size 20 engine way bigger than the one in video i don’t worry about sand and stuff I’m careful but I allways unscrew the glow plugs and shit no worries and I run it on the lean side and bash on it non stop I don’t know how the things still alive but starts first go if I prime good the first time tbh I even have small engines like urs I beat the fuck out of I even ran one with out the air filter for test purposes but then was having to much fun forgot about the filter and still runs but the smaller engines allways a little cunt to start some times but still starts one pull if it’s primed right

[@noahv1916]

hybrid32494 who knows I might just be geting lucky but I have lot of rcs that do the same shit with

[@dreamtoes4832]

I had a rc for like 6 -7 years i think everything seems fine the gas is doing what its supposed to i even checked the engine spark thing or whatever it turns red and everything but i try and try to start it and it wont start and like the controller the wheel on the controller is the driving and the trigger is turn for some reason i dont know the problem to this and why it wont start i even ordered a new thing to put in the engine just in case it was that fault it is coming tmr see if it works

[@just4kicks950]

Bro what's your fav Rc ?? Nitro or electric I luv the sound & smell of that nitro ! Are the pro's IMO ! And con's messy & high maintenance fuel prices . But still dig nitro 😃🙌 💯Salute to you brother 😎

[@hybrid32494]

whats up man!!! Good question, I have about an equal amount of nitro/electric and gas rcs at this point. They are all different, but I find that nitro and gas retain alot more value when used and usually I have a better time with them when they run right. Electrics are fun too, but if you're into the mechanics and tech aspects then they are pretty much all similar. Big motor, big battery, you got speed, thats all there is to it.

[@just4kicks950]

@@hybrid32494 Yeah love them nitro when everything goes right its awesome 👌. Nice pickup on the Tamiya terra Crusher ! Vintage Rc's are so cool ! Can't explain it( Youth ) 😃🙌👊

[@ryanerb5964]

Just got this truck. What shocks will fit?

[@hybrid32494]

good question, I am still running the original shocks on here. You can usually mod most 10th scale truck shocks to work on this tho. I think the hpi savage XS shocks would be around the same length.

[@joehervey84]

Might buy one of these in 2 weeks. I assume u used nitro rcx??? Any issues with them ? I've watched you're rally monster videos great job with a fair honest review.

[@hybrid32494]

thans for watching!!!. Yes this was from nitro Rcx some years ago. So far nothing went wrong with it at all. Two speed is very reliable and actually shifts well (unlike almost every HPI I've ever had), lol. Not the fastest RC overall but worth the money for a beginner nitro model. With better shocks and wheels this thing would be great.

[@joehervey84]

hybrid32494 I'm 33 an been in to hobby grade rc for 18-19 years. I just need a budget rtr nitro. Last nitro was a nitro slash,I really want speed n 2wd so the rally kinda meets my wants. I just fear 25% nitro might b a bad idea. U run only 20% for a .18 and a hot glow plug? I was thinking 25% and a med/hot plug from brake in to full tune.

[@hybrid32494]

don't worry about running more than 20% nitro, Ive used 30% before too. I just use the 20% because its cheaper, lol. And really they both seem to run bout the same if you don't run the engine lean. Are you at all into brushless electric? that would be the best bet for speed.

[@rajivk4705]

Hey bro...just a quick question.. My nitro is slow on acceleration. Does it mean a lean lsn?

[@hybrid32494]

Hey man. Thanks for watchin. It usually means your high speed needle is too rich, if you have way too much smoke too. Thers a bunch of factors, like motor temp too. If your engine isnt hearing upto around 200 degrees its generally too rich and will not hit top rpm.

[@rileyenia9388]

I’m trying to get my old redcat avalanche xp running haven’t ran in 2 years and when I did getting running 2 years ago it was after it sat for god knows how long it ran for half a tank cuz that’s what I put it in then the pull start broke and IT sat ever since

[@bobkinney886]

Just ordered the 36cc Roven for 529.00, exited to see that sucker RIP! My CC has 18 months of no interest, just hope Nitro RCX gets with the program, when i ordered the Barca, there was no indication they were out of stock, and according to their policies, the say they don't charge you for OOS items, but they did anyway, and their customer service Ph # comes up disconnected. I will file a dispute with my credit card Co if i don't hear back within 24 hrs. Won;t do business with them again

[@93jake81]

How long do the batteries usually last in the car while driving?

[@hybrid32494]

you mean the regular 4 AA batteries used for the electronics system right? If so, then I would say they last about 25 tanks of fuel, which is a good amount. You will instantly be able to tell if the batteries need replacement, because the steering will become sluggish and slower.

[@93jake81]

hybrid32494 ok that's really good thanks

[@byt3gaming960]

hello bro i have nh problem with my nitro .. have a force engine r.25 black ... bought new installed and set to basic settings to let it run in ... as soon as the engine is on for 30 seconds it starts to stutter and the engine stops.. do you have a tip how i can get rid of it or is it the fuel? the fuel line is too short... it is 3 cm long to the carburetor

[@hybrid32494]

hey buddy! In general almost all issues like you're describing comes down to incorrect carb needle setting. Try to richen the carb with both the Low Speed needle and the High Speed needle, the engine should have plenty of smoke and a normal low idle. In terms of your fuel line, it should be 5-7 inches long overall. Sounds like a tuning issue to me.

[@lildonkey3044]

Im just a kid do it all myself it hard but I got it to work movvmm

[@hybrid32494]

NIce, I was 12 when I got into nitro RC. Had to visit my local hobby shop a few times for help myself, ofcourse youtube wasn't a thing as it is today at that time.

[@johndenu9230]

Hey man do u still run ur nitros even if they leak My hpi rs4 leaks fuel but runs good think its the engine lol

[@hybrid32494]

hey man! what's up! Can you tell me specifically where you're observing a leak? Also is it unburned fuel leaking or more like an exhaust leak around the engine and or/header. Technically there are not many areas for leaks to happen and generally the motor should run very poorly if you have an air leak, which could include a fuel leak. Tell me more and I'll try to give you some advice.

[@dinoilcagnolino3213]

What keeps the engine from gumming? Is it the after run oil?

[@hybrid32494]

DINO IL CAGNOLINO hey man!! Yes, the after run oil inhibits rust, just like regular transmission oil in cars. You can use wd-40 also, but its not as effective. 3 in 1 oil works too for this.

[@charlesmcgehee3227]

Even after run oil will not stop gumming up after 5 or more years.

[@asams7255]

I'm trying to start one that has sat since 1980

[@hybrid32494]

hey buddy! That's very long LOL. I never came across one that sat around that much, chances are it's just got a seized motor. As long as it does not have mechanical damage you could make it move with disassembly, oil and heat. Use a heat gun and the internals should start moving easily. Also you'll need to clean the carb and fuel system fully. Let me know how it goes, I've got vids on here on nitro rc restorations.

[@richcarrier1947]

Have you got it started

[@americawalk1154]

I bought a used Ofna with hpi k4.6 engine with snapped pull start. can you use any strong string for pull start?

[@Cmack6025]

Add some after run oil in the exhaust, slowly pull the cord

[@marcusc173]

Hey I havnt started my rc in years so I'm wondering if I'll have to rebuild the engine or not? Thanks

[@hybrid32494]

hey man!! Hit me up on here if you need any help or advice. First check the entire fuel system and just make sure it's pressurized. They check the glow plug, and see if it ignites. add some 3-in-1 oil or after run oil to lube it a bit before you spin it. If it's pretty loose and has ok compression it'll fire. The carb cleaning is usually the key here, the nitro fuel tends to gum up after a while in the system.

[@marcusc173]

@@hybrid32494 thanks a lot!

[@ijustsavedalotofstressbysw9378]

Question I have a ofna p3 .28 and sometimes at half tank it stalls. Any advice.

[@dfwboxingisback9173]

As long as you store the engine so as it's covered (i.e no debris can get in to the engine block) then you are fine. I did some extensive testing on after-run oil (ARO) over the course of 2-3 years on like six different engines (including two of the same engines). I did a long video on it, but the net-net is I recommend it. However, the ONLY difference I could see is that the engines "peak" lasted about 30% longer than not using ARO. Meaning an engine usually peaks around 3-4 gallons, and then at some point becomes less optimized (usually on the bearings will wear, or the shaft might get scored with debris, etc., and it is not as strong. All rectifiable, however...but I've stored engines for 5+ yeatrs (never had a drop of ARO) and they fired up immediately. Heat is what you want to use.

[@austinsilva5054]

How is the durability of one of these ? Not trying to jump off roofs or anything , just maybe take to a track every once in awhile.

[@hybrid32494]

hey man! thanks for watching. I've been making a few videos on this RC recently with great speed runs, check out my channel, you will see. As long as you don't do crazy jumps of crash this thing is solid.

[@austinsilva5054]

hybrid32494 awesome thanks for the reply, enjoyed the video keep up the good content 👍🏼

[@vibezfortnite2703]

Mine was in storage since 2015 and now it’s running like since it was at first

[@hybrid32494]

hey bro, good work! We can't let our nitros die! NitroGang! Check out my newer videos on this truck, it's been kicking some AS* lately, I got a top speed of about 39 MPH with it too. I did a whole series on it with awesome on-board FPV shots.

[@SuperSurr73]

You from Staten Island?

[@hybrid32494]

Penny Budget hello, yep, i am. Thanks for watching!!!

[@LuxxyHD]

I didn't even know you can program up to 10 cars with that remote

[@hybrid32494]

hello, yes, best feature. All you need is a few spare 5-7 dollar flysky receivers and you can literally use one remote for upto 10 models, even ones that need 3 channels.

[@mikeymike3240]

TWO SPEED BABY 👶 lol 😂

[@hybrid32494]

whats up bro! Damn man ,this is an old video of mine, you can see I recorded it in one shot, no editing at all. This was a rough time for the Nitrogang right here. I still have this truck btw, it's been in many of my newer vids.

[@cannabisoutlawz]

Nitros are only good for one thing...Converting to Brushless

[@chriss4365]

The rpm they can do is insane.

[@hybrid32494]

hey man!! YEP, the average economy nitro motor can do about 32K RPM. The really good ones can hit 40K.

[@chriss4365]

@@hybrid32494 no wonder they only last a few gallons.

[@adventuresoftigtourettesin5885]

What’s a good idle sound like

[@hybrid32494]

hey bro!! That is really a question that is open to interpretation. All that matters is the idle is consistent and the clutch does not engage, therefore it's not too high. Based on engines and pipe combos the PITCH and/or loudness will be different. But you really should be looking for consistency and a good RPM, instead of sound quality.

[@scottcooper3741]

I wasn't aware aluminum can rust that's new to me 🤔

[@verdman54]

This truck looks like it blows away the redcat nitro dessert truck!!

[@hybrid32494]

I just checked it out, it looks the same. But very pricey compared to mine, I think I paid about 160 for mine. Both are fine, depending which is cheaper I'd say.

[@nitro_rc_dude8158]

I have 6 gallons in my trophy 3.5. Runs like new hasn't been rebuilt

[@fernandogopro]

Hey mate, your title is wrong! That's the normal procedure!! After so long without start u have to be more careful. you have looking for rust around, if its the case remove them, use some WD40 before, make sure you the flywheel is moving smooth, check fuel lines, etc..

[@hybrid32494]

hey buddy, thanks for watching and the comment. You are correct, I am much more detailed when I buy a nitro engine where I don't know it's history, I would even take the engine apart and inspect it and rebuild the carb. I this case I've owned this RC for many years and run it every 6 months or so, its usually easy to start.

[@Daniel-jw3of]

Like the way u pull the pull starter!! Lol 😂

[@hybrid32494]

hahaa, so you mean the right way, lol. JK. Short quick pulls is the way to go, ahahha. I;ve still got this RC and the pull start and engine are fine btw. I also did a few speed test videos on it, check em out pls. I'll just tell you now, It got 39 MPH with slightly larger wheels.

[@Daniel-jw3of]

@@hybrid32494 lol I know I got 6 nitro 1/10 scale and 1 1/5 scale 2stroke. So I know exactly how to start em properly I'm just saying

[@hybrid32494]

good point!! what 1/5 scale do you run? Have you seen my newer videos, I've gotten a few rare and unpopular 1/5 gas rcs recently too.

[@Daniel-jw3of]

@@hybrid32494 I have an 4wd hpi 46cc 2stroke trophy truck. And no I have seen your new videos but I'll be sure to watch. I also just ordered a 1/10 scale hsp warhead nitro buggy 2 days ago. I think it has the same engine ur running here. It's a vx18 (.18cxp) nitro motor

[@hybrid32494]

WOW, 46CC, very cool, is that one of the big block engines? I though my Rovan 30CC is enough and too much power for my BAJA lol. I also have a Redcat nitro shockwave with the same vx18 engine as this exceed and yours. I recently got a used redcat rampage XT, converted to an MT, whole situation with that RC right now.

[@Idkjsnfjdnsnd]

Go to 1:59 everyone

[@Intensegamer405]

At 6:37 it's trying

[@HONDACR919USA313]

do u use after oil ?

[@hybrid32494]

YES!!. If I don't drive the nitro rc for more than month I always use after run. The hobbico brand one. Although if you use more than about 10 drops it makes it quite hard to start next time.

[@noahv1916]

Just use wd40 don’t go buy after running oil there’s no need

[@noahv1916]

hybrid32494 reason makes it harder because it’s like flooding the engine so just put the oil then prime it enginr with out the glow plug like when u flood the engine but just don’t tip it upside down . then won’t be as hard to start

[@hawkcygan]

wd40 dont lubricate anything.

[@slon9120]

I personally do not, never had any problems even though my car sat for 2 years, started first pull after putting in new fuel.

[@bobkinney886]

Now i'm serious of getting the Exceed RC Barca 30cc Gas-Powered Off-Road Remote Control RC Buggy for 520$'s

[@hybrid32494]

you have some good timing, I was thinking the same about a 30CC gas model. And guess what? It's sitting on my table waiting to be unboxed right now. I'll give you a heads up so you can get the deals before my video comes out, check eBay for (ROVAN buggies). The Rovan 30CC rtr is well equipped and is about 440 now. They are identical to the HPI Baja and the one you are looking for, except they sell for in the low 400's, much cheaper than the exceed is right now.

[@bobkinney886]

@@hybrid32494 Damn, i just pulled the trigger on the Barca, but will let you know when it gets here, hopefully by XMAS, and yeah, love to hear how yours goes

[@bobkinney886]

NitroRSX just Emailed me and informed me the Barca is out of stock, so i submitted a ticket asking to cancel, and now checking out the Roven brand, like the 36cc buggy they have for 529$'s

[@hybrid32494]

great, hope they can cancel it quick for you. I got the 30CC model, the blacked out one with some upgrades. Paidl 395 plus tax with the eBay coupon at the time. Mine also has that huge rear home pipe, looks great. Interested in getting a silencer for it eventually.

[@bobkinney886]

@@hybrid32494 The only one thing that concerns me on this model is the pipe, looks vulnerable way out back like i see it getting some attention from the ground on a wheelie

[@depravedone]

I'm at about 9 years since start. Wonder if it's even worth trying.

[@hybrid32494]

you gotta try it, bring back the old nitro glory days, LOL. Which model do you have?

[@depravedone]

Savage X

[@hybrid32494]

you gotta start that up, I just ran my revo 3.3 the other day.

[@woody6692]

Yup. I just started up 11 yr. sitting time Novarossi 28-7 RT Plus on Jammin' CRT X1

[@Goomba_N64]

Why can’t you just start it with the pull starter? What’s the purpose of putting something in the middle of the engine, every time I see someone starting one of these things they have something stuck into the top of the engine what’s the purpose of that?

[@hybrid32494]

hey man! thanks for watching!! Those are called GLOW IGNITORS or GLOW STARTERS. All nitro engines need that to start. Unlike 1/5 gas motors these nitro engines run a "GLOW PLUG" which needs to be heated in order to start a combustion cycle. Basically it is your ignition source.

[@Goomba_N64]

hybrid32494 I see now, thanks for clarifying what that was, that always confused me

[@Goomba_N64]

hybrid32494 oh yeah one more thing before I decide to get into Nitro Rc, I see the fuel is usually like an orange color, is there a specific type of fuel you need to use for these small engines?

[@chrismaffett1973]

You need to preheat that engine before starting. Get it to 180° before starting. Not good to cold start a nitro engine!

[@hybrid32494]

Whoooah, hold on. How are you going to warm it up to 180 degrees? that is basically the low end of running temperatures on nitro motors.

[@chrismaffett1973]

@@hybrid32494 yeah you need to. Ask anyone who knows anything about nitro engines.

[@chrismaffett1973]

@@hybrid32494 it's called a heat gun.

[@hybrid32494]

SO I watched an engine brake in video by ADAM DRAKE, he did use an engine heater that got the cooling hear to 200 degrees. This was for break in only, ideally the best way to start any motor, yes!!. IS this realistic and necessary for the common RC nitro basher, NOT REALLY.

[@brandonb.288]

Yeah - that is some absurd suggestion. Might as well preheat my diesel truck, sports car and family van as well right? The idle temps will get the engine into the mid 100s (F) and then a few short pulls will get the the temps close to 180-200 for running temps. So... the metal does not change between 70 degrees and 200 degrees that much, so even on the break in - if it is a gradual increase and "seating" of the piston it is fine. Otherwise the heating the engine to 200 before starting it is one of the crazier things I have heard.

[@isrealperez9069]

My brother in law has on in the garage so I decided to work on I believe in need a new engine the rope to start the engine is all the way out where do I buy the kit for oil filter, gas , battery stater

[@Pikkakikka]

What car is it?

[@hybrid32494]

hello, thanks for watching. This is an EXCEED NITRO RALLY MONSTER. There are many similar ones likes this with basically the same layout and specs, just different brand names.

[@bigjoker4u]

wish I knew how it turned out but to many ads for me thanks anyway

[@hybrid32494]

sorry, in that case I'll just tell you what happened. The rc started and I drove it around, LOL. Thanks for watching some, at least.

[@carlodalu3556]

I dont use oil because i dont have one

[@hybrid32494]

ok, gotcha. I'm gonna do some maintenance on this car soon myself, it's NITRO time.

[@mrwhite78]

do u use wd40 or not my freind

[@hybrid32494]

YEs, you can use WD-40 instead of after run oil.

[@davidwright4460]

Don't use wd40 inox way better

[@irishlad7458]

Should real take engine out and soak it in methonol

[@patrickB106]

i just bound my remote to receiver it is bound but have no steer or throttle what can it be

[@hybrid32494]

if you have no steering or throttle how do you really know it did bind correctly? Are you using a fleshy FS-gt3B remote and receiver, if not, which?

[@patrickB106]

RCR-2C redcat remote and receiver was flashing red once bound went to straight red

[@hybrid32494]

After the binding are you sure that you have the wires plugged in correctly? Try it again, otherwise I would recommend you get yourself a FLYSKY FS-GT3B remote and many receivers. Thats basically what I use, the cheapest, best radio system there is. And binding is easy, you can run uptp ten different models on this one remote with stored setting. I never liked other systems, their binding process is always bad.

[@7diplife858]

Patrick Brickler its hooked up wrong rewire the wires to the transmitter

[@cwatson42785]

hybrid32494 I just bought a gt3c off eBay for 45$ and absolutely love it.

[@yaquelinaguilera13]

I need someone to recommend me one good nitro rc

[@nitrogas5719]

Kyosho cars are good

[@sondraalicia4351]

i did't start mine in five years

[@hybrid32494]

have you tried to start your car yet? which one??

[@sondraalicia4351]

i need nitro gas and batteries

[@hybrid32494]

which model do you got? I've been getting back into nitro rc lately.

[@theps4gamerwifiboy704]

Nitro fuel is made out of of methanol and nitromethane

[@blackcountrybashers7760]

Just fell asleep

[@hybrid32494]

LOL, dude, I love you man!!! I will somehow have to work your comments into my vids one day. But I agree, this particular video was an old one, this was when I didn't edit anything and just straight talked and did stuff.

[@blackcountrybashers7760]

Just messin mate your vids are cool keep it up

[@hybrid32494]

LOL, I know!!! I know!!! Thanks for the comments, I love them all!!

[@stonegallimore1163]

Exceed rc is garbage get yourself a losi buggy or truggy you can actually buy losi parts in a hobby store

[@hybrid32494]

hey man!! thanks for watching!! I gotta say for the most part you are right, but I've had this one for many years so far, and literally nothing has broken, Ofcourse I don't bash it much. Watch some newer vids of mine on this one, I got it to hit 39MPH. Not bad, don't you think....