How to start mobile detailing business using your small personal vehicle | Building your ‘sedan’ Rig

[@B.Dizzler93]

I'm actively trying to start a detailing business out of the back of small crossover, you are an awesome person for making these videos man. I can not tell you how much I appreciate you.

[@Tomasthe1st]

You're like the only one who shows this process. Thank you so much!

[@FyFamily]

I will be building one like this to fit in my STI and then I will start my journey of mobile detailing and being my own boss… thank you for your knowledge, brother…

[@Flatfourdetailing]

Hey man I’m building one for my wrx. Good luck too you

[@FutureTrunksSSJ1]

How’s it been for you two. Hope all is well and I hope you guys actually started your journey and not given up

[@killmaster46]

How’d it go I’m trying to start one out of my civic

[@NBANainoa]

How is it bro

[@M.B.autoaesthetics]

Mine been doing great in my STI!

[@Dtorresolo]

Love that you actually show some of the plumbing work ! Keep doing more builds ! 💪🤙🏻

[@rickymartinez4950]

Hands down to this video 🙌🏻 you know how long I’ve been looking for a video to show a diy pressure washer skid without using all types of expensive equipment. I never leave a comment on videos but this is a must. Great work with talent. Straight to the point with details THANK YOU VERY MUCH 🙏🏼

[@revibeautodetail]

Thank you so much brother! 🙏🏻

[@zurc597]

Same 🔥

[@isaiahgarland7615]

Same

[@piggybank9899]

​@revibeautodetail8044 Where you get that board from that's attach to the water tank it's not in the description.

[@leojohnwayne1422]

@@revibeautodetailwill this set up work on a 16’ Lexus IS ?

[@fastmotoring3102]

Thank you bro it work I did the reel thing for mine it came out good the only thing I when I order the lil hose that goes from the reel to the pressure washer it’s a 14mm I got the bigger one so had to return it and get the correct one

[@luivids181]

Nice set up really helpful but do you have links to the PVC fittings both elbows and reduced I can’t seem to find them in my local home depot

[@robingarcia9780]

Thanks for helping us out bro. Working on getting my setup complete but having a lil trouble getting some fittings out here in El Salvador. All going in a 2009 Nissan Sentra.

[@bloodmooncomix457]

It's really nice getting step-by-step instructions from another Ryobi junkie! 👊😄😉😚😎🇺🇸

[@TJ-rw2mz]

pinoy detailer here!! great video lods.. hope to get a setup rig like this one day lol.

[@moncorp1]

suggestion: run those 2x4s all the way to the edge of the plywood, then put those eye bolts into the 2x4s. It will give them much more bite. a full 33 gallon tank weighs 260 lbs. You don't want those tearing out of that plywood in the case of a fast brake or worse.

[@yvngjvcrspy]

Appreciate you showing us step by step how to do this, this is a awesome tutorial and its crazy informative, keep doing good work bro!

[@garciasautomotivedetail5196]

Slamming Set Up. Keep up the great videos. Garcia's Automotive Detail Tucson Az

[@gensyvanterpool2890]

there is no waste in this video thanks for sharing 👊🏽 .

[@bigchris5413]

You can even buy a storage deal. For the top of your car. And use it for storage also. That’s what I’m going to do for my Prius.

[@revibeautodetail]

Yeah i have that idea too, but I haven’t bought them yet but i will soon! 😁

[@TheVANITYKILLJOY]

I’d like to see a video on how you have everything else in the car. Like your wheel brushes, buckets chemicals. Surely you have to go back and refill if you don’t have your gallon chemicals to dilute. Also steamer and a stain extract like a bissle

[@marcusmack3632]

Awesome setups. I redid my focus hatchback based off of your designs. But warning these water tanks don't like being stood up vertically like in the Prius. The sides bulge like crazy under the weight of the water. Just a heads up. Still super nice setups tho guys. Everyone thinks you need a huge van. You don't at all.

[@revibeautodetail]

Thanks man! About the tank i put good amount of support on the bottom of that tank coz i know it will happen 😁 thank you again!

[@roflips6314]

@@revibeautodetail I read these tanks need to be vented. How do I do that.

[@GG-ub4ej]

​@roflips6314 I would guess you open the shut off valve for your fill side while using the pressure washer. But not sure how to vent while filling. The one in the prius had a vent but it was standing.

[@PlayerUnknown05]

I'm designing a trunk setup for my 4Runner with a 40 gallon classAustoms tank stood vertically. Does your tank seem like it might break from being stood vertically or is it good to go?

[@marcusmack3632]

@@PlayerUnknown05 its definitely not meant to be vertical. The side bowed out and the top was collapsing under the weight. I've turned mine horizontally now.

[@dperez578]

I have a question about the water tank. How do u keep it from pressurizing and exploding when using and filling. Do u just leave one of the valves open?

[@letslearn2gether145]

Pure talent... great setup enjoy watching

[@revibeautodetail]

Thank you so much!

[@matthewowen5574]

Looks awesome. Very clean and professional. Everything has its place. Great job!

[@jcon2wheels49]

Hi. Inspire by your journey and trying to create my learning journey here. I do have a question. How many cars can you get done with that 33 gallons tank. ? I do have a smaller sedan. (Civic ) and was wondering if you have any water left at least after detailing 2 cars. If you can even get done 2 cars.

[@hegemomusick]

Can you do a test on the water pressure do you need a pump to feed the power washer?

[@carlossolis9933]

Thanks to your video I just did the same mod for my Amazon air hose reel to pressure washing conversion 💯💯

[@ricardovillerias9671]

Donde compraste la pieza de conversión la ando buscando

[@Fear882]

Starting working on a project using your design.... The conversion is actually smaller then the sedan. ... It'll be put in a mustang . I do however have some questions relating to the wiring and if there are any items NOT listed in the description. If you can get back as soon as possible it would be a great help!

[@SalfromDETAILS]

This man has his game on lock.

[@revibeautodetail]

Thank you Sal! 👊🏻

[@sergiorobles6819]

Great video .watch it couple times to see how it's done . 👍 What wood or piece you use for bases and you paint it ? . How is gravity feed working out for you ?

[@raylendvera4729]

I love your setups, I would love to do one for my Honda Pilot 2005 one day

[@jo90007]

Thanks for sharing. What is a ballpark figure for this setup? And how do you power this rig using retrofitted alternative car power?

[@fredschair-heavytalk2683]

Hey excellent content. Quick Qurstion. what are the actual sizes of the 2 elbow pvc fittings?

[@optimumdetail-cj2eh]

Can you post a video of the Ryobi having a consistent pressure flow by just being connected to the water tank?

[@franciscomartinez7008]

Hello, good morning, I like your videos and I liked the configuration. For the Prius, do you have a video on how to install it from the beginning for the Toyota Prius.

[@adrian2392]

I’m trying to put this set up in my 2018 Buick regal sportback

[@adrienbowden4654]

Man, you’re giving great information. This is super helpful for me.

[@revibeautodetail]

Thank you 🙏🏻

[@hulamac74]

@@revibeautodetail how much

[@KGReef]

Great work! Clean and professional looking.

[@AlruMoToRiderz]

I did the exact thing with the air hose reel from harbor freight, hasn't given me any problems yet

[@revibeautodetail]

Same here! 👌🏻

[@vladimirvillegas8266]

@@revibeautodetail how much you sell them if you can make one for me

[@revibeautodetail]

Dm me on instagram.

[@vladimirvillegas8266]

@@revibeautodetail what you ig

[@dannifl6329]

For the last fitting is it 1/4 to 3/4 fitting because i can’t find it anywhere? Thank you

[@erickalcazar3741]

Where did you make your shirts?

[@OG_WOLFNATION]

No response ❌That was expected 💯

[@mike.detailer]

Impressive how you made this happen in a 300! Nice work!

[@revibeautodetail]

Thank you!

[@Mr.Pinger]

im sorry dumb question but how do you fill it without causing air pressure to build up inside the tank, or is that piece on the top inside corner?

[@LetsFishingGo]

I saw in your old video where it had the breather valve on the tank. Do we need it for this set up and if so can you please share a link? Thank you!

[@kickrocks_]

Bro I need to see a detailed video on that prius setup I have the car and half the stuff already. Thanks for these great videos!

[@johnboy5632]

Hey brother . . . . NICE WORK!!!!!! Where did you get the foam mat ? Where you mounted everything to?

[@DETAILINGDETAILING-hb7bj]

Thanks for post, very well done, very informative Really enjoyed how you describe in detail and listed parts and equipment

[@willwalker5409]

What size is the reducer ??

[@adriang9779]

Im new to all of this but how would you fill up wash buckets using this plumbing setup?

[@drrous9917]

I just subscribed to your channel. The build looks great. Thanks for sharing your knowledge. 🎉

[@nightwalkerp1289]

Very good videos and Thanks,,,,I learn a lot...

[@stilleysmobiledetailing1696]

wassup brother G!! awesome video fun to watch

[@ActOfGod-oj8eo]

Thank you for this DIY video! 🍻😎🫡

[@jonathangarcia5431]

What about the other hole on the top right of the tank we just leave it open ?

[@J.M.A.D]

trying to figure out the same thing @revibeautodetail

[@dieselbeastgamerkushgod7784]

Appreciate you i will be doing this exact same thing

[@cristianknuttsen8082]

Hello friends!! Question: I have the same 1800w pressure cleaner, what type of generator should I use for it to work well and what voltage do I need?

[@monkeyman6847]

Do you not need a pump inbetween the tank and pressure washer? Does it just use gravity feed?

[@victorialeon2784]

Yeah what about a pump?

[@PolishedMobileDetailing503]

You don’t need it for the ryobi. Just bleed the air out each time before use by running the washer with no gun on the hose.

[@optionprinting826]

such an underrated channel! 50km subs tbh

[@Maxxout1994]

I’m sorry I may be slow but if we have a tank and a electric power washer like yours. We don’t need a generator or a machine powering the water ?

[@anthony1113]

Doesn’t the ryobi needs to be gravity feed for its water supply?

[@goldendetailsnc]

Genuine question, who'd you go through for the shirt? I prefer a collard shirt and that one looks like it BREATHES.

[@VipDetailingMontreal]

awesome video! -What's the screw eyes size by any chance? I couldn't see it on the package and in Canada they don't sell it in packs of 2 unfortunately. -What's the size of these 3 wooden pieces that hold the Water tank, please? - How many Gorilla Black Spray did you use to paint this Plywood? :)

[@lpautodetailing2413]

Nice setup, much success in your business

[@revibeautodetail]

Thank you!

[@elgladiadoreternorodriguez3018]

Awesome. How do you do the setup. Base on car models and how much is the cost for everything shipping and made of the equipment?

[@apexholland7427]

Great setup!

[@JoseTorres-hd4lo]

Quick question. Anything special to use for the upper vent area?

[@aliduran1418]

We need you in California 👍🏼👍🏼

[@revibeautodetail]

i am in Oakland CA brother!

[@Kyle-wo3yf]

How does the tank vent when filling ?

[@mikadaqo99]

Great video I'm doing this build on my Corolla, quick question whats the size of the PVC reducer?

[@revibeautodetail]

1/2

[@Beatty804]

Just subscribed. Think about downgrading my tank and pressure washer to be more low profile. I have a 2300 ryboi and a 50 gallon tank.

[@MrJuandiego1988]

Can you post the link to pressure washer fittings?

[@revibeautodetail]

linktr.ee/revibeautodetail

[@jacksonsmartech6579]

Lovely Setup Bro ... Is this like a gravity fed system ... I can't see any pressure pump in between the water tank and the pressure washer ...

[@revibeautodetail]

Yes it’s gravity fed.

[@cesar-kq7zd]

Can you do a video on how you made the promotion sticker for your car please

[@luisserna6739]

How is the tank vented? The website shows not to have a pressurized line (such as a garden hose)? Or how may I modify the tank to allow an opening where I can fill it up by just pouring water in through the top of the tank? Is that possible? Thank you!

[@MrCamerononicus]

This is awesome! I love your creativity! How do you get customers? Do you do mail marketing?

[@adolforeyes4102]

Who made the shirts? They look so sick!

[@yves8836]

Who made the shirts!!?

[@baldcoconutz1]

Can I swap out the Ryobi pressure washer for the Active 2.0 and will it still be compatible with the parts on your list

[@autobrosmd4078]

Good job!! Awesome vid brotha!

[@JacolbyBeatz]

Ive been waiting for this video, thank you

[@703Youngster]

About How much total is this setup ? Looking to try and buy mainly what i need at one time i have most of the stuff

[@authentikautodetailing]

Very nice and simple setup. I love how minimal it is. I am thinking of doing this in my Honda Element SC. What type of wood did you use for the base?

[@revibeautodetail]

3/4 plywood

[@authentikautodetailing]

Do you have links to the straps you used to secure the pressure washer and water tank? And those little silver screws that go into the wood for the straps. Thank you!

[@nelsonluyando4725]

Can't find the hose converter anywhere. Only 3/8 appears ,any suggestion?

[@ikairaa]

What's the link for the reducer that connects to the tank

[@MattMiller200]

where do you get that vent?

[@jamescampos848]

What exactly is the reducer specs? I tried looking at my home depot here in Canada, and coming up blank. I have the water tank all set, just the reducer

[@LKSblackops]

Where do you find this water tank in Canada??? Doesn’t anybody know

[@sunnyprak2412]

Using an air hose reel for a pressure washer. Are you not worried about rust???

[@brauliosanchez6896]

What fitting did you use for the vent?

[@Jbreeezyjg]

Minute 13:53 what size fitting and where did you find that!? lol I can’t seem to find that one and brass says 1200 psi is that worth the risk?

[@callieserye771]

Awesome set up :) champion!!!

[@revibeautodetail]

thank you!

[@JCoova87]

I grabbed all the parts but the you said the pvc elbow is 1 1/2 and I found I just took your info way to literally and grabbed the wrong size. It would be best to at least fix it in your description so that others won’t make the same mistake now I have to order again for the rite fitting

[@senorbonbon]

I just ordered everything he had in his description, what was wrong about it

[@harlemkid144]

Amazing video man

[@dannys.auto.detailing_]

Great video bro. Amazing. You got some good energy too. I hope to someday setup my Honda Fit.

[@revibeautodetail]

I would love to setup a fit!

[@TankcareMarine]

Can you please send the amazon link for 90 degrees fitting?

[@revibeautodetail]

Link in the bio

[@RodrigoNavarro-s6c]

Exito carnalito.

[@coexist1018]

Nice neet work, I maybe in touch for a set up on a Rav4

[@loudpack2155]

Would this setup fit a 2022 Nissan Altima?

[@Kevinsmith-cb2fv]

Do you have any problems with gravity feeding the pressure washer? Is there any recommendations on gravity feeding?

[@revibeautodetail]

No never had an issue.

[@luispalma2209]

Does the ryobi pressure washer self prime?

[@deanrogan]

So how come you didnt make a vent for the water tank? That tank has to have a vent for fillup no?

[@Eduardotrejo03]

Awesome video What was the size of the reducer

[@SoFloSpotless]

u ever figure it out

[@omarzamudio7463]

What did you use for the air vent. You missed that part when doing the plumping

[@senorbonbon]

What air vent? Does there have to be air for the water tank

[@PrinceJes]

​@@senorbonbon 28:43

[@heanognegash3506]

Where can you get a flexzilla hose that connect the pressure washer reel to the pressure washer?!!

[@jadynrivera8660]

What size pvc reducer bushing?

[@brad90630]

How would you do a set up for winter

[@braveswrld1567]

You don’t need a water pump for this setup ?