How To Sticker Swap with Funko Unko

[@JjosephA4]

Very helpful, quality control on stickers for pops r horrible at times ,and can be placed wrong or not straight, this helped me straighten up the stickers instead of having it look all sloppy

[@Unko-Nel]

Thx buddy

[@justin_g6187]

Im eyeing a 2017 glow all might right now, the box is crushed but the stickers are intact. I wanna buy another wave one all might and just put the stickers on there. Boom. Should work right?

[@Unko-Nel]

Yeah remove those ones, I'd just cut the windows out and remove remove when ur new pop arrives

[@sweetlogo]

I do this to stickers that are crooked. Stickers that aren't straight drive me nuts.

[@Unko-Nel]

Agreed

[@jjs_funko_sodas3517]

Can you do the same thing with the smaller target sticker? I can do the bigger target sticker all day but when it comes to stickers like black light Spider-Man it always rips no matter what I do

[@Unko-Nel]

You can the main think is to heat the sticker so thr adhesive is deemed to become for sticky so that way when you do remove and restick itll stick easier.

[@jjs_funko_sodas3517]

@@Unko-Nel yeah I’ve tried that 3 times with that particular sticker and it doesn’t work, just half comes up and it rips

[@Unko-Nel]

@@jjs_funko_sodas3517 so what will do is have a test out on which adhesive can I use for to reactivate

[@jjs_funko_sodas3517]

@@Unko-Nel yeah cuz i have a real cool skeletor with special edition sticker that came off perfect but putting a reg target sticker bigger one is the wrong version, so I ordered a sticker and that looked bad and unoriginal , now I’ve wasted 4 pops with the smaller target sticker trying to get it off with a blow dryer and razor, it’s driving me insane lol

[@cole9383]

I get what your saying. I personally dont collect for stickers so idc but that does fuck the value up TREMENDOUSLY

[@Unko-Nel]

Yeah, the good thing about thr new special edition stickers is I'm actually game for that. It's nice and I'm not going to remove it

[@T1D0zTMChannel]

Hi sorry, what is the name of the cutter? I never seen a cutter like that. Large and short

[@Unko-Nel]

Cutter?

[@mrbosscollector7431]

Amazing bro

[@Unko-Nel]

😊

[@pidrone96]

What if I wanted to restick a peeling sticker?

[@Unko-Nel]

You can try reheating it again although I suppose the adhesive is no longer intact or can be rvived so super glue I guess...

[@pidrone96]

My biggest worry is using a blue that could stain the window, do you recommend any?

[@jjs_funko_sodas3517]

@@pidrone96 very tiny bit of gorilla glue stick I’ve used, very very very tiny swipe

[@peterstachura8595]

@@jjs_funko_sodas3517 I use the brush & nozzle gorilla glue. Use the brush and just wipe off the excess glue before applying it to the backside of the sticker that’s peeling away and press firmly on both sides (outside and inside of the box so obviously remove the pop beforehand). Works like a charm! I did that to a 2017 shared sticker that was starting to peel away and you’d never know it by looking at it now! If a corner is starting to peel a little that’s not a big deal to me. Just keep it inside of the soft/hard protector to keep it from peeling any more.

[@voydkid]

@@peterstachura8595what's gorilla glue?

[@mrbrainchild7637]

Window will warp when heating the window.

[@Unko-Nel]

Depends no how high of a temp ur using and feeling the output of the heat. It won't melt if heating a certain degree and distancing the heat from area ur firing it at.

[@sativasmoke6208]

Yeah, if you do it incorrectly it will.

[@marlyq7242]

i wished that i had the razor im a kid so i cant touch those so i mighta removed the thing that sticked but i think superglue fix that im using an comic cover for this so we should be good

[@kennysoto6036]

What about when the sticker doesnt stick and after a while it rises off the plastic

[@Unko-Nel]

That I wouldn't use, if the sticker is not stackable I wouldn't continue with that sticker.

[@lilyhewitson7718]

What happens if there’s sticker residue/glue left after you’ve removed the sticker. How do you get rid of it without damaging the box?

[@Unko-Nel]

WhT I've always used it a small pad that contains adhesive remover but be ver careful U don't edge the cardboard..

[@robertboycewoodturningn.c.7838]

Would love to sticker swop.👍

[@oscurocattivo8900]

Can this be done with any sticker??

[@Unko-Nel]

Not all some con stickers have a diff type of adhesive, some strengths are more powerful of a sticky.

[@oscurocattivo8900]

@@Unko-Nel I’m trying to change the stickers on my FAO Toy soldierfunko Chase. 10 to the diamond and FAO logo be changed?

[@Rylamosa.agency]

Where can I find stickers for funko pop?

[@Unko-Nel]

Usually I buy pops that are on clearance from local shops that have the stickers and then I remove those and plaxe it to the pops I want to sticker

[@Rylamosa.agency]

Yes, but you see I am from Romania and in this country are just special edition stickers

[@Unko-Nel]

@@Rylamosa.agency oops ok well then I'm not to sure over there...😟

[@Dev850]

Etsy has any sticker you would ever want

[@Rylamosa.agency]

They are original?

[@RickyMtz]

I lowkey hate this idea . Specially when it comes up to con stickers since there’s a difference in the price margin

[@Unko-Nel]

It reflects on pros and cons, yes I know where u stand by what ur implementating. Agree on Con stickers as well as you noticed I didn't vouch for anything con related bit again it can be done and if done properly you cannot notice thr swap.

[@2735angel]

Would I be able to swap a GameStop and glow in the dark sticker that is already on a box to a different one without a hairdryer?

[@Unko-Nel]

Problem is thr adhesive does not become soft and will leave residue or thr sticker could tear...by all means u can try but ao wouldn't recommend it tbh...

[@2735angel]

@@Unko-Nel ok what I will do is get the stickers on Etsy so they will be in better shape

[@dagos555]

Well did this on a sdcc pop and it melted the window lol

[@Unko-Nel]

How hot was your gun!! Lol you prolly went either too close or used a stronger setting

[@dagos555]

@FunkoUnko used my girls new hairdryer and not my old one and did it too hot I think lol just swapped a signed Brad pitt window last week and it was fine , then I tried to swap a batman patina sdcc damaged box and the window dented a bit on the new box 😭

[@Unko-Nel]

Unfortunately it does happen sorry it happ in that scenario

[@joexys96]

So this is how the scam works for con exclusives and shared lmao

[@Unko-Nel]

Peopke have there opinions for me it helps not getting thr north American stickers that I find more of a collectors addition aside from the crap silver special editions.

[@hansolo4575]

Cringe

[@Unko-Nel]

😂

[@LeviSaku]

Only someone who deceives himself, without any respect for himself, has no dignity, education, values ​​and principles & would you do this? Oh really? Let's be realistic, This is for people who buy Funko Pop Pirate or Clone, in my life and more than 10 years with Funko Pop I have changed a sticker, it seems to me something extremely repulsive And by doing that you lose your own respect, you lose everything, but if you say it's not like that, it's because you're a HEDONIST and you avoid everything bad, my best vibes to the true Funko collectors

[@Unko-Nel]

Ok Mr perfect