HOW TO STOP ANDIS MASTER LOUD CLATTER/TUNE

CLIPPER REPAIR

[@thomashebert5907]

Finally, a man who's willing to go behind the curtain and talk about the things the other videos didn't (in fact some of the videos go out of their way to say 'these are all factory adjustments, don't mess with them') It turns to that those adjustments you mentioned were the ones that eliminated the chattering (big screw / little screw on side). Thank you very much.

[@signalsoldier]

Brother!!! I was doubtful that I would find the information that I was looking for before I searched. I've had my masters for over 14 years and I didnt want to get rid of them. I cant say enough how thankful I am for this video!!! Cheers and thanks!!

[@markruddyjr56]

This helped a ton. Got a set of 70 year old masters that had way too much noise. This made this run like new. Thanks dude!

[@ceciliatrevino6129]

this video was most definitely helpful. In cosmo school and they have been real noisy. i fixed the tension screw and they run real smooth. thanks for the video.

[@jaxvanhorn6413]

This helped me so much!! I was about to give up on it but this solved my problem! Very knowledgeable, thank you!!!!

[@Retroweld]

Garrick is an Andis Master Ninja! This is a huge help. Thank you Sir!!

[@jamieshorter7093]

Finally somebody explained the parts of this clipper that I needed to hear.......Thanks.....I'll soon get to fixing on my Fade Masters

[@elliottsmithlove1]

Thanks for the clipper tune up lesson. Andis master is unrivaled in cutting and now I fixed mine up instead of buying a new one

[@TR-kg7lh]

Brother you are a life saver. this tutorial saved me some money and time and my andis! Much. Love. 👍👍👍

[@malikaustin2958]

Appreciate the content. My masters is working good as new now 💪🏾 God bless

[@SHARKZTOWN]

Thank you I bought an Andis Master in like new condition still in box but blades weren't moving for $30 for parts as is. Fixed with this video and got my self some good running clippers for bargain.....Thanks Bro

[@jessegarcia6104]

Thanks bud! Saved me some money not having to buy another set of clippers. Great info.

[@MrFilthyAnimal]

Thanks man, I really appreciate it. I couldn't figure out why my clippers weren't acting right! This helped out plenty.

[@ChicagoMade]

U helped me a lot to get my andis masters back working after I dropped them

[@iambigsim]

this is exactly what I needed. My clippers are working like new.

[@seanfallon6312]

Couldn't find anything on here to help me. Your video told me everything I needed to know. Thank you

[@DarthB213]

Sometimes its hard to understand what he is trying to say , but you can tell this dude knows how to disassemble his clippers and put them back together. Thanks , much help👍🏽

[@bravojuan559]

I watched your video and it was very helpful, I played with my machine till I got it working good, removed the lower tab as well to get a closer cut. thanks garrick white

[@YouTubehndl]

Wow awesome video man! Got my rattling problem fixed super quick!

[@DOMINICANCHILD231]

thank u so much brother they stopped chattering very smooth and quiet I cant say enough how much this helped

[@Saffron333]

Thank you for this video! I was close to just throwing mine in the trash but I think this troubleshooting did the trick.

[@alizarincrimson123]

Thanks! Mine purrs like a kitten now. I adjusted the tension screw and the left to right on the side. Would not have known that without this video. God Bless.

[@Sxbliminal_.]

no 🧢 u all over the place with this video, i dnt even know where to start to fix mines b/c u are addressing so many areas of concerns

[@karaez11]

Thank you for this video!! Helped me so much!!! I fixed my clippers.

[@treefrog2687]

Thank you sooooooooo much for the instruction. I was able to fix my Andis Master perfectly from your video.

[@kamper951]

thanks for the video bro. much appreciated by many barbers. -cali barber

[@L316049]

Thank you very much for this, sir. One quick adjustment and my silver Master is back in top form.

[@GarrickWhite]

Your welcome

[@beastjz]

Thanks bro you really helped me out I was at a complete loss.

[@joeyyys9079]

thanks man, was able to fix the pressure screw because of this video

[@express951]

That's this video is the best I was able to fix my clippers in less then ten mins. Thanks for the help bra

[@MightyMothra]

3:02 This solved the issue I was having. Really appreciate this video, man, it helped a lot.

[@nealchatman6266]

Thank you! I couldn't get these to quiet down for nothing!

[@jarrellfox9119]

Great video. Really got masters on point

[@Racer..X]

4:22 got mine sounding just like his! Thanks brotha🙏🏾

[@Chuck.Mast3r]

Preciate the help, God bless brotha🙏🏽

[@tevynstewart320]

Man I wanna thank you so much for this man if I could pay you I would thank you so much uncle!!!!

[@jarojoe6938]

Bruh you are a life saver. Thank you!

[@moneybags8869]

Thanks brother!!! I feel like a heeeehaaaaaa dunkey lol smh i had my andis for 11 years. And how i even forgot bout the two screw on the side. Thanks agein brother!!

[@hovtopia1685]

I love my master dude. And I had them in the morgue for about 5 months debating if I should throw cremate them, bury them or just hold on. I'm glad I held on brother thank you 🙏🤜🏾🤛🏾🤜🏾🤛🏾

[@theelonnanicole]

This helped me soo much, thank you!!!

[@marissascheffel6559]

i get that clatter noise after I do a haircut and I always thought it was because hair was getting stuck somewhere in the blade while brushing it off and that was the reason for the loud noise I get after a cut, Im excited to go into work tomorrow and try tweeking it a bit with these tips to see if it gets rid of the sound!!! Ill let you know how it works! wish me luck!

[@bobianahill1928]

thank you this helped me a lot with the right explanation

[@chasmotv9607]

Thank you sir. Very helpful 👌🏾

[@GarrickWhite]

@eric ellis sr you're welcome and thanks for the compliment

[@jacobbradley9541]

Thank you. You are awesome.

[@poncho559]

I'm not gonna lie after watching your video I fixed my Andis masters after them not working for over 5 years

[@Nizzey215]

My issue was the power screw which is the smaller screw on the right side.. it was slipping it took me many years to figure this out but today I put plumbers tape around it after I cleaned it real good. It's nice and stiff now it will never move again. But taking the Clippers completely apart is a good thing you will quickly learn how it all works together just by looking at it I will suggest getting a headlamp that you can put on your forehead to work on it.

[@hannahdorton8187]

Thank you for this video, it was so helpful!🙏🏽

[@justanornallife]

Hannah Dorton u cut hair

[@DRob70]

Video was a lot of help brother, thanks

[@korri2xxx]

helped a lot.,. got my 5 yeat old machine back to work like new🔨💣

[@danielcarraway9641]

It worked. Thanks.

[@360kids2]

man, that was a great informative video

[@rickyhernandez4844]

Hey just a tip for people trying to figure out why there clipper is clattering is to make sure you attach both blades to original position, i was testing them without it after adjusting it and it would continue to make noise and after i installed it, it was fine

[@T-_R-_E-_Y]

Worked thanks!

[@oscardiaz3181]

Thanks for the video brotha it help me out good

[@EmHotep4520]

Do have a video on how to zero gap your andis fade master?

[@blackmagicbarbering1100]

I like how you call them the cutter blade and the calm blade.

[@7SickoZ]

Thanks alot bro you saved my masters, I took em apart to do a deep clean and when I put everything back in they where clicking like a MF I gave up on them for about a month, turns out it was the cutting blade holder, it was set to far back and it was rubbing against the metal on the masters.. all I did was adjust it and it was good as new !

[@GarrickWhite]

Glad they're straight

[@1985themovement]

i believe I may have the same problem with mine. i bought a used set that needed a replacement blade because of a chipped corner blade tooth. Put new blades on and there was still the metal on metal sound. vibration and clatter.

[@GarrickWhite]

+1985themovement you tried tuning it with the small screw on the side

[@nomatterwatialwayswin]

Do u have a video to fix the lous noise the cordless andis master makes? My clips run so loud!

[@brauliocano8736]

How do you make it to get to the first notch? I've seen a lot of videos complaining bout it, and I just bought a pair but it seems like I can't just get them to get to the first notch. Thanks in advance

[@zidelll]

7 years later this vid helped me. The more you know

[@flaviocastro8951]

Thank you so much!

[@GarrickWhite]

You're welcome glad I could help

[@jesussaves2856]

Very helpful. Thanks.

[@grandeluciano5896]

This guy is the 👑

[@ronnieandmaja]

Thanks big bro!!!

[@BL-pv7et]

Does it eat into your guards when zero gapped great tutorial brother

[@GarrickWhite]

@TL Just adjust it properly and it will be fine

[@Kg-hl4kh]

This video saved my clippers. I was close to trashing it

[@unguidedone]

fantastic video :)

[@Nizzey215]

good work my dude

[@bobbyhill302]

Thank you sir 💯

[@D9084]

Thanks man I'ma try to adjust it one more b time and if the problem continues I'm definitely going to try the grit sand paper because I think the fade blade is too sharp

[@GarrickWhite]

That's the problem the points on the end of the blade is to pointed and sharp because that blade is very thin file the points down a little not to much but continue to do it until you notice it stop snagging the pores and be sure to do the ends on the blade because that's what snag the most

[@GarrickWhite]

Make sure to round the ends off they're are square now and those points is what doing the snagging

[@GarrickWhite]

,@Jorge Perez thanks and barber luv

[@FastdounutTV]

I had to turn the screw on the side. I was about to throw mine away. Good looks

[@clicknsee450]

my trimmer is getting heated up.what would be the problem

[@jasoncolbert3279]

Mine just started giving me problems ,I've tried to adjust the screw on the side but it slowly turns back to the way it was previous and starts making that loud noise again!!

[@pottershand91]

lobe you're vids but I have a question... everytime I use the tension screw to adjust the cutter blade it goes right back to make the loud clatter please help... how can I fix this

[@GarrickWhite]

adjust the small screw on the side as well

[@moisesramos476]

What tool do I use for the little holes tho? I know I have to loosen the flat head screw than tighten the other one with the holes, but what tool do I use for it?

[@GarrickWhite]

a pair of neddle nose pliers that will fit the holes

[@chavanieto187]

Thank you the noise stopped!

[@Unavailablesorry709]

Cwippers

[@pottershand91]

question when you're cutting blades slows down or stop does it mean the tension is 2 much and what can I do to stop it from happening ?

[@GarrickWhite]

1 timedime. If you have tried tuning it by the small screw on the side with no success, then you'll need to tune all the way. You'll need to take the lid off, next takes some neddle nose pliers and turn the bigger screw on the side in all the way, then turn it one full turn back. After that loosen the tension screw in the clipper but don't take it out. After that use a screwdriver to lift up the magnetic arm from the top of the clipper where the two allen screws at. once you do that turn on the clipper, it'll be be running loud, but start turning the tension screw back in and you'll start hearing the clipper quiet down. Next tune it from the side smaller screw until running full power, put lid back on, oil blade and you're set..

[@ramongotkix2826]

great video. how to I get my masters to stop the whistling or squeaking noise? and it happens about a min in to my cuts

[@GarrickWhite]

you tried oiling the blade

[@byronsito5048]

Great video thanx for the info

[@GarrickWhite]

You're welcome!!!

[@cemildurak2345]

Garrick White bu makinayı nerde bulcaz

[@GarrickWhite]

Cemil Durak Eger abd bu alabilirsiniz

[@drctv2023]

Problem solved. Thanks.

[@D9084]

Thank you sir

[@blancomike7361]

I wanna know see what you did to zero gap.

[@mcfriedchicken1972]

hey garrick, what if my masters only clatter everytime i oil them up? even then, i try to adjust them but it keeps clattering :/

[@nflcolts83]

MCFriedChicken1 same here man.... got it brand new. .. after 4 cuts... I oiled it then started to make a noise.. I loosen the side screw didn't work.

[@D9084]

Mine keeps getting caught in like my pores by my temple how would I stop that it's pretty painful is it just that the blade is to sharp I have the fade master blade on

[@GarrickWhite]

Look at my video on wahl balding clipper snag & pulling do the same exact thing with the fade master blade only the comb blade not the cutting blade

[@runningbull6178]

Thats a WHOLE lodda dogone cladda goinzone bra

[@chosenocutz3233]

Can u do a cordless

[@eastac4680]

how can I loosen bottom screw on right side of cippermaster.the one under the flat head screw

[@GarrickWhite]

Some needle nose plies while do the trick

[@eastac4680]

Thanks

[@eastac4680]

Still wasn't the problem very weak when I turn it on

[@tommykane8143]

Perfect

[@trimmersbarbershop]

I love you my brother

[@Channel1718]

what size screw do u need to hold the blade in place?

[@GarrickWhite]

Ci Se you will have to contact andis and order it

[@Channel1718]

Garrick White thanks. was about to go to home depot and look for it

[@christophersoto4696]

I've played with the tension and the side screw but my masters seem so weak. I can easily stop them with my fingers

[@GarrickWhite]

Have you tried screwing the other bigger side screw in all the way then a quarter turn back check the video out again when I talk about that part

[@ashwinhirani6768]

halfull thanks

[@blessed7411]

💯🙏🏼

[@Channel1718]

what tool do u use to adjust the circle on the side with the 2 holes?

[@GarrickWhite]

Ci Se a pair of needle nose pliers, what exactly are you trying to do because if you mess with that you'll have to tune the clipper in general, meaning you'll have to reset everything. What's going on with the clipper?

[@Channel1718]

Garrick White initially it was making a loud buzzing sound which led me to this vid..but i was able to turn the other screw on the side to lower the noise.. basically trying to figure out how to use and maintain this clipper

[@GarrickWhite]

Ci Se so is it running smooth now and cutting well? when you press on the cutting blade while it's running is it stopping or running weak?

[@Channel1718]

Garrick White I'm waiting on this screw for the blade before i start cutting again.

[@GarrickWhite]

Ci Se. well don't mess it until you can start it up

[@regalrivera]

Quick question guys, i zero gapped my masters and now its eating my magnetic guards. How can i fix this?

[@1985themovement]

you may have them set a little too close. try dialing that cutter blade back just a hair.

[@jesuspizano9514]

hey garrick, can you help me out? i tried zero gapping my Masters but everytime i open the lever all the way up, the bottom blade sits it an angle and it stays slanted after

[@GarrickWhite]

make sure the blade is snapped into the fork/tension tightly, when you take the blade off the cutting blade should remain on the fork tightly, if not remove it take a screwdriver place in between the the fork and spread them apart and snap the cutting blade back in place. Let me know if this helps.

[@jesuspizano9514]

Garrick White yeah it snaps in place. Again when i open the lever the bottom blade is slanted. Im positive the top blade is centered

[@GarrickWhite]

can you shoot a quick video of what it doing and send it through my email [e-mail]

[@jesuspizano9514]

Garrick White the file is too big, I'll go ahead and upload it on my channel, I'll shoot u a link when its uploaded... i think i may have fixed it for now like i show in the video but it's happened before where it seems fine but after a couple uses the bottom blade will slightly slant.

[@GarrickWhite]

ok