How to stucco a cinder block wall.

How to apply stucco to a block wall.
www.paintersph...

[@ABNPainters]

Installing stucco is a labor intense process that is very unforgiving on your back. We stopped bidding on stucco installation because we are getting older and our backs are telling us we should leave this type of work for younger generation. So if you are looking for a stucco installation quote - we don't bid on this type of project any more. Sorry. Please visit our website for a current list of project we bid on. www.housepaintinginphoenix.com

[@wordimobi5765]

More relaxing than a Buddhist meditation video.

[@marcorangel8668]

😅😅😅😅

[@colinmoore68]

Good job and thank you for posting. I am gathering the courage to take on a similar size project. Can you tell me the approximate wall coverage from an 80lb bag of stucco? If a top coat of stucco is to be applied, how much time should be allowed from the application of a base coat? Hope your backs are doing well these days.

[@exquisitladywilliams2924]

Great tutorial. Excellent job narrating the steps and use of graphics outlining products/tools used. You made the process look very simple and clean.

[@rogersayes4013]

How about it. I need this guy to give me tutorials on everything. I'd be super successful 😅

[@richarda.valdes1197]

I stuccoed my home 23 years ago. I used a acoustical spray gun and sprayed my cement block directly onto the block. I made sure the blocks were layer neat and clean to start. Sprayed water on the block and sprayed on my stucco . It’s been 23 years in the heat of Baja California and I recommend it to anyone

[@sgtrojas6]

What type of material did you use?

[@misaelg15]

I wish all videos will be like this one . Easy to understand . Very clean work

[@jesuscarrasco3341]

By far the best video I've seen explaining how something is done. I wish you were on the east coast.

[@boldty653]

Great job on this video! Excellent instructions and suggestions/recommendations! Much appreciated!

[@jacquelynnyte8001]

Very informative and easy to follow. Appreciate paint/primer suggestions as well. Thanks!

[@jenlyles124]

I really like your voice. Thank You!

[@CarolinvonPetzholdt]

Very good video and explanation

[@mattthomson1689]

Question; working with an older original, unpainted block wall, would a stucco application eliminate any need for joint tuck-pointing with mortar? Also, would a half-round block cap be applied by hand instead of a trowel tool?

[@brianbower7303]

Simple and very clear. Excellent! Thank-you.

[@msh104utube]

Very clear tutorial! The customer should of went with a finish coat, as you can still see the outlines of the cylinder block. What percentage would the cost of a second coat have increased the project by? Why do you prefer Sherwin Williams and Dunn Edwards over Behr? Thanks.

[@memirandawong]

I am a general contractor and this video is a great straightforward refresher on the stucco process. Good job!

[@Duvall9042343]

Who are those 173 people that gave this excellent video tutorial thumbs-down? Who are they?

[@memirandawong]

Most likely they are people who are wholly incapable of learning or performing this work.

[@aryntay145]

I have a 30×70 cinder block building. Do I need to use drylock or something else on the exterior and what would I do on interior before framing? Any advice is greatly appreciated!

[@lalo5574]

very good video, and 51 jealous individuals...

[@StephanieHughesDesign]

Good video. What specific Terracotta colors did you use for the primer and finish coat? Love the finish coat color. Thanks.

[@orknibbler]

Very helpful, clear instructions and very informative. Thank you so much. Really appreciated

[@RVBadlands2015]

I live in Golden Valley/Kingman Arizona we have colder weather then the Phoenix area is there anything you do different to a stucco wall that has finish coat. How long would the stucco last verses painting it.

[@Sonichistorian]

A green float would’ve been a lot easier to float out the brown coat. If you were going to apply a color coat of stucco over the top you could have used a hard rubber float over the brown coat.

[@johnnywadd7960]

What La Habra product would you use for the finish final coat? Thank You

[@ABNPainters]

www.homedepot.com/p/LaHabra-Stucco-Texture-Coat-in-Paint-Grade-Finish-1248/303464451

[@tep149306]

Great instructional video. Thanks

[@THESHMUPMASTER]

Thank you for a very straight forward, easy to understand video 👍👍

[@vincentquarles3159]

Very Good Instructions. Would like you guys to do my fence. Looks like you're in the Phoenix AZ area. I'll give you a call!

[@JosueGarcia-sh5or]

If the blocks are painted can I still stucco them? Thank you

[@mc4492]

Great ez to understand . Those are good brand paints but hella expensive $$$$$

[@johndonaldson7043]

Not to bad , stucco is very hard work. I liked that you where very clean.

[@missb9914]

Thank you very easy to understand

[@michellegaza7740]

This video tutorial is great! I'm kinda excited to fix up my block fencing now.

[@azplease4121]

My back aches just watching this. Wall looks amazing! Where in AZ are you located?

[@ABNPainters]

north phoenix

[@azplease4121]

@@ABNPainters is Surprise, AZ too far to travel for work. We'd love our house and block wall painted by you!

[@melissah170]

It looks fantastic. Very good job!

[@danoc51]

Nice video! Very informative. Thanks for your work on this.

[@angelgama1981]

What material is used to make the mix? First layer

[@gwilchek]

Is it possible to do light gray color or other colors?

[@sherryelshaug9897]

FANTASTIC Video! Thank you.

[@hollycox102]

What kind of stucco did you use? What equivalent can we get at home depot? We thought we had to put up chicken wire in front of our cinder block. Do you put a primer on the block first?

[@ABNPainters]

www.homedepot.com/p/LaHabra-LH-Fastwall-Stucco-Base-Sanded-SW-80-lbs-743012/303464449 you can put chicken wire, or adhesive. We did not, and so far it held up well.

[@Engine61]

What color did you use in this video?

[@imbenmeyer]

What are the benefits of the top coat? You mentioned one or two things. Also, I see you’re in Phoenix. I’m in Nevada! Hey! About how long should one wait between two coats? You said it was warm. But those of us I’m Arizona and Nevada know that 100 is warm. I don’t want it to dry too fast I’d I decide to do this.

[@alberthoogendoorn2396]

Very good video and very nice job.

[@tigranjamharian132]

Great video, thank you! Two questions: what do you have to do to make the stucco stick well if the concrete wall has already been painted and we’re going over the top with stucco? Would there be any issues with water/moisture ruining the stucco if you only finish one side of the cinderblock wall and leave the other side open? Thanks

[@DingDingPanic]

Paint stripper or sand blasting to remove the paint.

[@mcgee6177]

I would use surface bonding cement if you have a painted block wall.

[@michaeladams2077]

About your second question that nobody answered. I’m no pro but I can say it’s best to water proof the backside. Depends also hood the core is filled with concrete and how much rain / water gets to other side. If it’s a retaining wall then I’d say absolutely waterproof the back side. I just did mine. And am now going to stucco the front side. Black mold can build up and show eventually.

[@rubymilstead5519]

Just sponge or spray on wall outside design

[@PatoLoco1833]

Thank you! Great video

[@VA_Biker]

Great video! Would the process be the same for slump block? I live west of I-17 and my house (as many in this area) is slump block. I always thought stucco needed chicken wire or something to adhere it to the Block.

[@ABNPainters]

Never applied stucco to a slump block before so i am not sure . sorry.

[@HerRoyalHighnesss]

You don’t lath (chicken wire and paper) block walls.

[@alexandradobson1067]

I love your video. Thanks so much!

[@glencabbage52]

Thank you sir. Great video. Much appreciated!

[@MrPVaSoldier]

Great video

[@MRM-wp4gr]

It looks like the thickness you applied is only about 1/4"....is that right? Would you say that the consistency of the stucco is about the same as mortar for setting block....or is it a little thinner?

[@MrFreddarama]

I wish all videos were this good! You explained everything very well and in detail.

[@teamhpg1043]

Nice video and well explained

[@antoniosmall4413]

What would use on a larger project to deal with the droppings?

[@lawlovers1173]

Thanks for this great explainer video.

[@ABNPainters]

Glad it was helpful!

[@carolynwolfe5023]

Whats the name of the stucco mix you used. I'm trying to find at Home Depot Thanks

[@ABNPainters]

www.homedepot.com/p/LaHabra-80-lbs-Fastwall-Stucco-Base-Sanded-1-Coat-2502/206969849

[@darthtrader7605]

Thank you. Great video.

[@CDPMATH]

Hello and thank you for the tutorial. What if the cinder block is already painted? Can we follow the same procedures outlined in the video? Thank you and take care.

[@ABNPainters]

you have to apply adhesive first. kzbin.info/www/bejne/eKnHf5qdaMSYh7M

[@CDPMATH]

ABN Painting awesome! Thank you very much.

[@witwilbw]

Great video with easy to follow steps and explanation!

[@MrJohnmmcgrath]

Excellent video, good production, thanks

[@jasmine13in]

Hi, can we apply stucco directly on a painted cinder block wall?

[@ABNPainters]

you need some kind of adhesive between paint and stucco. Stucco will not adhere well directly to paint.

[@googleuser569]

Amazing on how it only took 7 min to accomplish this. Wife had seen this video and now on my a$$. 😂 Great video tutorial though.

[@RSchlotzhauer525]

This is what I wanted to do but I’m worried because there’s cracks in the grout lines and holes at the bottom in some places.

[@gonenotforgotten6089]

Let’s say that gate were to come off the top, how would you continue that wall? Knock the top edge of stucco off and lay the blocks?

[@katieclark3573]

Hi there, great video. Do you have to fix cracks etc. in block wall with mortar prior to doing stucco or does the stucco solidify those issues?

[@matoko123]

Nice. I've always trowelled the finish. never used water sponge, I'm going to try it!

[@djtall3090]

Great Video! Thanks

[@hoggnoisevevo4577]

Great video.

[@SailorsGrave73]

Nicely detailed video

[@JLThisisMe]

That's really nice work.

[@orlandokings4844]

Is a cement mixer necessary for mixing stucco if you're doing a whole back yard fence? Also do u have a video on the second application that the customer on this job didn't want and what is the difference? Thank you

[@richardschlaud9895]

Very well done, very well explained.

[@viewmotion1373]

Y el mesh?

[@togodbetheglory9725]

Very clean job 👌

[@bigdaddy7670]

Back-breaking work, thanks for sharing my friend.

[@elsaint7657]

awesome ❤

[@snappphotoboothllc4228]

Which finish coat you recommend?

[@REGA3141]

Excellent instructions and well done video . Thank you.

[@kelseymathias3881]

This is what's about to be done on a new apt. next door to where I live. Interesting to see how the wall will look after the blocks are covered with the stucco. Much better, since my window looks right out on this wall!

[@andrewgrijalva2212]

Gracias...

[@nphoenixcrimefighter]

Can you recommend a similar company in Queen Creek AZ?

[@maedie1]

Great video.

[@BlueOsito]

Zzzzzzzzzzzz

[@amyliablack8269]

Thank you for the helpful video. Can you tell me how many days you should wait between the base coat and the finish coat (not paint)?

[@ABNPainters]

Ideally the base coat is fully cured (about 30 days ) before applying finish coat. But don't take my word for it. I am a painting expert not stucco expert. Go with your stucco contractor recommendation.

[@gregorydakin2767]

Do you have to water wall before painting?

[@dw3992]

TY for a great video! We've had block wall built all around our property & have now decided to have it stuccoed bc it looks so much better that way.

[@ABNPainters]

Glad it was helpful!

[@jherzog23]

What if my cylinder block wall is chipping away, but still sturdy, is there something I should do differently ?

[@ABNPainters]

i am not able to give you recommendation without looking at it.

[@msanchez1210]

Muito legal!!!!

[@gregorydakin2767]

Just wondering, how many times do you water wall before painting? Thanks

[@ABNPainters]

in Arizona where it is very dry and hot ideally 3 time a day for a week. and once a week for 3 more weeks. For more humid climate i would consult your local stucco contractor.

[@patrickgreaux6399]

The finished section doesn't look very smooth to me. Is there another technique that can be used to make the finished surface look flatter and more even?

[@ABNPainters]

it is not very smooth because this is base coat. if you want it smoother you would apply finish coat. Using trowel instead of sponge would give you the smoothest finish.

[@hughpiatt7661]

Will this technique work for a brick firepit? Could the same paint be used/

[@ABNPainters]

technique should work. as far as materials (stucco/paint) you would need something that is heat resistant.

[@Mike-bf9sm]

Finally - a video which shows step by step everything that is done over just a small area at a time

[@kemaberry3538]

Is there different colors of stucco so you don't have to paint it? Like the color of flagstone?

[@ABNPainters]

yes. stucco comes in different colors.

[@kaysonekaysone6245]

Thank you homie for sharing!

[@rogersayes4013]

Great video thanks. I'm doing a project this summer and this helped a ton

[@ABNPainters]

Glad it helped!

[@newlevelsconstruction7509]

That is not how we do it in jamaica look on my Channel

[@rolandsaludares694]

What would the cost for that job you did.

[@boogieboxmusic4331]

You could use a sandtex paint to finish the wall..

[@RVBadlands2015]

Can it be sprayed on will it where better.

[@NorthHoustonCityLimits]

Thank you great video!

[@lukejones1244]

can you do the same with lime?

[@salbrookstone2904]

Excellent video & narration. Thanks.👍 Can you tell me how many sqft an 80lbs bags cover please?

[@getstuk87]

27 square feet at 3/8" is about the coverage if I recall

[@BrentDaughertyMe]

How long do you let the stucco dry before painting?

[@ABNPainters]

about 30 days or when ph level is low enough. kzbin.info/www/bejne/anjVgaGMm8R0gsU