In this video i will show you how to poperly mix and apply a brown coat on your cinder block wall. all the prep work for your smooth finish stucco
Пікірлер: 349
@richarda.valdes11976 ай бұрын
I built my home in Mexico 35 years ago and after wetting my cement blocks I used the same air gun that used to spray a textured ceiling to spray stucco directly on the block . It’s been this long and my outside walls here in this area of Baja California Mexico is still in great condition.😊
@ORIGINALTOPICS7 ай бұрын
This is one of the best videos on how to do something because there’s more working instead of talking
@timstringer30377 ай бұрын
Please wear a mask I'm 68 and can't breathe I have concrete in my lungs love your work master mason
@Dbb276 ай бұрын
Thank you for the warning. Appreciate. Blessings to you.
@julioortiz5869Ай бұрын
Much love I love my job be doing for 12 years now all ways keep that mask 😷 on have a blessed one
@kingshamous27 күн бұрын
Randomly came across this comment. Good warning message. Thank you
@hugosanchez16433 жыл бұрын
These guys are good, I’ve been doing stucco since 1992 and now days no one wets the block first with is “very important” and yes it’s ok to use a go devil on block but not lath, and that’s exactly right, it’s all about moisture and layers not one shot, THE ROD is the only way to do smooth or float finishes and see how he finishes it side ways?! that is knowledge...Great job!!!
@PxssyGalore3 жыл бұрын
You said,"No Lath"..why do you say that? And when you say Lath, do you mean that metal mesh stuff that you attach to the wall and then stucco over? I want to someday build a house out of cement block then stucco/render over it. I thought that you use that mesh stuff so the stucco lasts longer?
@MMGJ102 жыл бұрын
@@PxssyGalore I'm not as experienced in stucco, but I do some and I'm a mason/bricklayer. You do not need galvanized mesh over concrete block. There's a natural, mechanical bond, a cementatious bond that occurs. Make sure the block is as clean and dust free as possible, and dampen it, but don't saturate it. Over wood? Yes, use a moisture barrier then attach the mesh and plaster coat it.
@MMGJ102 жыл бұрын
@@PxssyGalore Kirk Giordano plastering is a great page to check out too.. Lots of good info there.
@glenwarren43512 жыл бұрын
Put glue on block not water pure amateur 45years in the trade
@rayterry72 жыл бұрын
@@MMGJ10 Will it bond to cement board without Mesh? Will it apply and hold just like it does to the cinder blocks?
@MrHandsomeferny3 жыл бұрын
The cleanliness and professionalism at the job site is 🙌🏻, more contractors need to be like clea. And not dirty their surroundings
@SeamlessFab Жыл бұрын
Who’s Clea?
@jimhartley98053 жыл бұрын
So Miguel wears a white shirt and after the job is done his shirt is still white... must be great to work with someone so competent. Good professional video too, thanks!
@mail065133 жыл бұрын
Miguel makes it look so easy.
@cynthiaipina95413 жыл бұрын
Oh plus all the names of the tools your using! Closeup of wall was excellent to see the consistency of the mix on the wall, what it should look like! 👍👍keep up the great work & videos! thank you
@Locharts_ Жыл бұрын
You guys do quality work. I’ve learned a few tips from you that I’m going to tweak on my own projects
@VirtualSculptures3 жыл бұрын
Please protect your lungs from cement and silica dust when mixing your mortar.
@BeckVMH3 жыл бұрын
I’m not a contractor or doctor, but was thinking the same thing.
@stevenm31417 ай бұрын
I knew from when you said wet your walls you had this under control! Made it very easy with your routine.
@darrellblair58183 жыл бұрын
Very impressive. Definitely a professional. Great job.👍
@dirkg70623 жыл бұрын
Great job! I've been doing this kind of work for many many years.
@genevandyke40883 жыл бұрын
Just goes to show you , that there are people with some great talent A
@jclements658 ай бұрын
True craftsman, very talented. They make it look easy, definitely not easy,
@1classilady4132 жыл бұрын
Excellent video. The commentator is professional with a little swag. Love it
@thomasodetinape41803 жыл бұрын
Working men👍! A very fine line between a hoddie and a baker,!!!!
@ronrocha3163 жыл бұрын
Looking forward to part two. Nice!
@cynthiaipina95413 жыл бұрын
Love how you explain everything & why you do all the extra steps. Excellent youtube video! Subscribed! & don’t regret it. 👍
@wthomas79553 жыл бұрын
Excellent video. A lot of good information here.
@newyorkdragon3 жыл бұрын
Good job! From a stucco company in northern idaho
@MMGJ102 жыл бұрын
Very nice, professional work!
@karlachavez314 Жыл бұрын
70’s had grooves! True that!
@Dbb276 ай бұрын
In many ways,lol.
@pocatellocowboy1077 Жыл бұрын
This was great. You guys not only did an awesome job, but you made the video be enjoyable to watch. Thank you!
@tonymullen39203 жыл бұрын
75 Stucco finishers who did not like this video for letting us know how to do it ourselves!
@Rubbernecker6 ай бұрын
These guys are artists.
@charlespollard89233 жыл бұрын
Fantastic job. So many contractors spray and say looks good.
@BuildingwithBudd3 жыл бұрын
Love your work , we are watching from the UK cheers from building with Budd 👍
@karlherceg32892 жыл бұрын
Very informative, thank you!
@jessedukelacrosse64703 жыл бұрын
That miguel es chingon!
@stevenjohnson6266 ай бұрын
Well done video. Found the music very relaxing.
@kevinvitale89802 жыл бұрын
skilled artists... awesome video
@mattcreamer21578 ай бұрын
Miguel makes that looks super easy he got good technique
@mahdideldar76133 жыл бұрын
I liked that applying material technique I wonder if I could use that technique in cement rendering here in Australia as well
@Casmige9 ай бұрын
THANK YOU For letting people know to properly Pre-Wet the Cinder-Block wall…
@picu2delhighenergy293 жыл бұрын
So much 2 learn....thanks guys !! 🖒
@df44803 жыл бұрын
Is like tape and float with cement.. respect ✊
@garyK.45ACP3 жыл бұрын
Definitely more an "art" than a science. Good job.
@outofthebox99133 жыл бұрын
Excellent work nice job
@refugiopoint3 жыл бұрын
Nice video, appreciate your time, peace!
@easycleanbahamas99323 жыл бұрын
Thanks for the knowledge
@justinsantana48023 жыл бұрын
Great videos man!
@kylemccali33243 жыл бұрын
thanks for showing the way.
@OgedayKhan3 жыл бұрын
I am did same like this plaster when I am doing I feeling so much enjoying,, I will tell you for drying issue use a brush and throw some water on face plaster before shaping... Also sometimes I want to do plaster some kind of mans after making hammering on his face,, I wanted learn how to do decors from concrete then painting I like to amazing architect design,, I love this construction job,,
@agustinbeas28333 жыл бұрын
We call the go devil tool the money maker 😂 good vid
@rigomanjarrez30042 жыл бұрын
Es todo mis chingones, keep it up .
@kid37643 жыл бұрын
Good job guys !! 👍👍
@DanO530.8 Жыл бұрын
Believe me he is making it look fairly easy but it’s way harder than you think they did an amazing job
@torpigeonloft7793 жыл бұрын
Nice thanks for sharing 👍
@mouse65023 жыл бұрын
Miguel is the man!
@FromTheHood2TheWoods Жыл бұрын
Bout to do it. Dope thank you brother
@enriquefausto54362 жыл бұрын
Talk about privacy, that is high and looks 👍👍💪, CHINGON!
@BeADad24478 ай бұрын
Chingon el Miguelon! Awesome
@jarrenklohr80468 ай бұрын
Looks good. If the bid allows add rib lath to the wall and attach with shot pins. That ensures you never see grout lines bleed through.
@FromTheHood2TheWoods Жыл бұрын
I’m glad I work for myself, because after a day like this, I would need two days off to rest.
@robertcalamusso42182 жыл бұрын
Nice work.
@JoseSilva-hy4pr3 жыл бұрын
Lol Miguel is doing everything, I just was passing by and decided to recorde !!!! 😂😂😂😂😂😂😂😂
@GrillWasabi2 жыл бұрын
Great video
@Ireland-bc2gx2 жыл бұрын
Same process here in fla over block ,float finish or texture 👍
@pedropereira89242 жыл бұрын
Buen trabajo 👍🏼👍🏼👍🏼
@almaf56873 жыл бұрын
I’m in Austin Texas and had someone do our foundation facing! Wish I had seen this video before we had someone work on it😫! We didn’t know any better so the people that worked on it made a disastrous job of it! They used different types of cement, so our facing has different shades of grey on it!
@hatzlmike13 жыл бұрын
Waaaaaaaaaaaa
@LF124683 жыл бұрын
Alma F, If you took the cheapest price then you got what you deserve.
@aaabbbccc543 Жыл бұрын
a true plasterer can take the mud off the front of the hawk ..most wont bother to use a rod on a wall....or wet the block.. so good job !!!!!
@elsaint7657Ай бұрын
beautiful ❤
@YUKONCAMINO2 жыл бұрын
You make it look easy! I have paint on my cinder block wall, do I need to pressure wash all the paint off first?
@vdscnch04983 жыл бұрын
Very Good workers
@kosmotto3 жыл бұрын
What form of magic do you use to get it to ignore gravity. I tried it a few times. I put it on the wall it falls off. Works great on the ground.
@roadjet1843 жыл бұрын
Is that like 2 parts sand to 1 part concrete? I'm in the midwest we get 100F in summer and - 10F in winter. looking for a mix that will handle the extremes. Thanks for the help.
@LF124683 жыл бұрын
I been a stucco mason on the east coast for over 20 years. California seems to be behind the curve just a tad. We use vinyl beads and Jmolds etc. Glad to see you guys using rods too. Atleast you guys arent hacking it up like that Kirk Giordano guy, that guy is the worst I've seen.
@pandaplastering24663 жыл бұрын
Lol I agree ☝️
@osvaldosandoval95239 ай бұрын
Wrong brother we use metal trim because we don't have humidity like you we use stainless steel next to the ocean but everywhere else we use regular trims and we have the plastic trims to some city codes ask for plastic trims some don't
@franciscocazares1093 жыл бұрын
Ese miguel es chingon.
@samueladams584 Жыл бұрын
Do you use wire brush or brush wheel to clean off previous paint on cinder block in order to prep for stucco ?
@AbersonPlastering2 ай бұрын
Hi panda, try using masonry sand instead of plaster sand over masonry walls. You wont regret it. Ken from nor cal
@gilbertchavez84763 жыл бұрын
Nice work ! Hope you make a million bucks but no I'll leave mine to the professionals !!
@smallnuts23 жыл бұрын
does stucco help with water protection? my outside wall is starting to get coerced. Do I sand them down first?
@ATappin Жыл бұрын
Can I use type S mortar for this? I have extra bags from the block wall job.
@AA-rc4zr3 жыл бұрын
Is it possible to stucco directly on hardy board? If yes, is the process different?
@artemiogomez86197 ай бұрын
Los maestros!
@askor95853 жыл бұрын
Can you apply that over a red brick chimney?
@rancesgarcia5853 жыл бұрын
Chingo compa!
@xuser99803 жыл бұрын
You guys will be finished and on to the next by lunch. Looks great. 🤙🏻
@petergray54913 жыл бұрын
Hi Migual,what's the dimensions of the devil board,might make one out of alloy?
@MarioMartinez-os5ch Жыл бұрын
Love your videos forever I am making money
@DanFrederiksen4 ай бұрын
Looks pretty good but would it be possible to use something more fine grained like how spackle is for drywalls? I'm guessing it will be much easier to work with and much finer finish. just a matter of using very fine sand?
@albertblazo18103 жыл бұрын
Should you wet finished wall twice a day for a week or more
@angelethie57293 ай бұрын
Nice Work. Yes, masks when mixing.
@fortunecollector3 жыл бұрын
can you do this over regular brick wall?
@mikesaldana41643 жыл бұрын
I’m waiting on part 2 to finish my wall lol
@pandaplastering24663 жыл бұрын
Part 2 is now up 👍
@louis39983 жыл бұрын
@@pandaplastering2466 where you guys from
@Akziis3 жыл бұрын
@@louis3998 i believe they're in fontana
@alexandersalarms53803 жыл бұрын
@@louis3998 looks like California .
@julioastudillo69743 жыл бұрын
😂😂😂
@user-lk2cr4kb5l7 ай бұрын
Have you ever had marble sand together with white cement, it's a miracle so beautifully white when it dries, you don't even need to paint it, we use it smooth or thrown rough, rough can be used when a wall is crooked and abnormal.
@richardchavarria81537 ай бұрын
Is there a product to apply to the wall before adding cement instead of just watering or wetting the wall?
@robertcalamusso42182 жыл бұрын
The “ Zen “of plaster. ☮️
@SantiagoPerez-vf8hp Жыл бұрын
About how many scoops is needed for a 100 ft wall ? Pls and thank you
@trustedSolared4u3 жыл бұрын
Great job 👍🏽 Is that go devil half of a stop sign? Lol 😆
@djhago31237 ай бұрын
How different yous do it compared to us in Ireland... we do a scud coat first at 2to 1 which is like a splashed on coat.. then scratch coat at 4 or 5 to 1.. then a finish coat at 4 or 5 to1... one coat you usually see every block through it
@mattjaramillo30652 жыл бұрын
Great video! I have a couple of questions. 1. How did you nail the corner bead without blowing out the block? 2. I started to stucco a small courtyard cmu wall in my backyard. I put the whole 1/2” coat in one shot. A big chunk fell off the middle and I noticed a lot of sag on the bottom of the wall. Would you recommend two 1/4” passes to avoid this problem? Thanks for the great videos and your advice! 👍🏼
@pandaplastering24662 жыл бұрын
Make sure the block is filled and angle your gun inward. Don’t mix too wet. And apply in multiple layers
@mattjaramillo30652 жыл бұрын
@@pandaplastering2466 Thank you for the reply! Are you using a ramset or other tool to set the nails?
@kyledewhitt9722 жыл бұрын
I just set my corner beads with mud right after I mix. No chance of blowing a block out doing that.
@pullupboy54639 ай бұрын
@pandaplastering2466 please reply can you stick foam block on this and gow
@Matentupe8083 жыл бұрын
Miguel has skills!
@mikesmithey48823 жыл бұрын
Every time I make a batch in the mixer ,I always put five gallons of water and five shovels of sand and let it run for a little bit before I turn it off, just to keep it clean.
@pandaplastering24663 жыл бұрын
I’m gonna start doing this.
@AdrianJTube3 жыл бұрын
Thanks for this great video. Really helpful. I have small planters made of block that I want to do smooth finish stucco to. Couple quick questions for you. How would you do a smaller mix for a wheel barrel or large 30gal drum? Seems like it's 5-6 shovels of sand to every bag of cement, but how many LBS is the bag of cement and roughly what is the measurement for one shovel of sand lol? Also, is a cement mixer the same as a plaster mixer? Really appreciate any help!
@tychonova93903 жыл бұрын
Mix in a bucket with a drill and paddle
@slicksjobshop2 жыл бұрын
I think they have premixed bags ready to go, just add water.
@michaelrutledge70487 ай бұрын
Standard bag of Portland cement is 80 lbs.
@MillCityJam6 ай бұрын
Thanks for the vid... Mucho squats...
@JLT2342 Жыл бұрын
Can you put the stucco on the block walls that have paint on
@jameskelly27773 жыл бұрын
Professional
@9uidin9li9ht2 Жыл бұрын
So this is applying "stucco" over cinder blocks, not "concrete". Which is preferable and why? Great video thanks so much!
@yolandamercado67213 жыл бұрын
I love to mix cement, it feel like frosting a cake.