How To Sublimate a Tumbler In a Tumbler Press With A Silicone Sleeve

[@made.by.markia]

You’ve done an excellent job!!

[@SnazzyMoonDesigns]

Thank you!

[@rampena9426]

You the Man Tracy!

[@SnazzyMoonDesigns]

Thanks Ram!

[@rampena9426]

@@SnazzyMoonDesigns Im still getting ghosting 😭 I think i have to much pressure that my silicone sleeve is bunching up and getting air.....Ill try again

[@SnazzyMoonDesigns]

@@rampena9426 Make sure you tape nice and tight before putting on the sleeve

[@samiebennett352]

Looks great

[@SnazzyMoonDesigns]

Thanks for watching! I do not use the silicone sleeves myself but I enjoyed making a video for them!

[@FamousModelingAgency]

Great job as always. You are a expert at this. But what do you prefer, tumbler press or convection oven? And why? If you don't mind me asking.

[@SnazzyMoonDesigns]

I prefer the convection oven because is does a better job with darker color tumblers

[@FamousModelingAgency]

@@SnazzyMoonDesigns Thank you so much for replying.

[@vikki92411]

Beautiful

[@SnazzyMoonDesigns]

Thank you

[@alexvelis1]

great video. what tumbler press is that?

[@SnazzyMoonDesigns]

It does not have a brand name on it! I bought it from someone on FB Marketplace

[@laurawidgeon2287]

Hi, thank you so much for your video, I guess I'm just looking for more about how you printed that picture out and what did you use to print on, like printer and what kind of paper... thank you

[@SnazzyMoonDesigns]

I use Affinity Designer to print my designs. I have 3 printers. F170 with Epson Sublimation Ink, ET15000 with Printers Jack and ET 4760 with Cyclone Ink, I use Asub 125 paper. Thanks for watching!

[@raymondlilley8037]

What kind of tape dispenser and tape are you using?

[@SnazzyMoonDesigns]

www.amazon.com/gp/product/B08D8RQF78/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

[@amyemery4337]

Thank you for the informational video. Does your heat press have an item# or model# listed on it? Thank you

[@SnazzyMoonDesigns]

务功能烤杯机 额定功率：500W MAX （土5%）（视不同配件而定） 额定电压：110-130V. 50/60 Hz 加热垫规格： •¢50-75mm 小杯垫； • ¢90*H98mm 小锥形杯垫； •中75-90mm 标准杯垫; • 中70-75*H220mm杯垫； • 中88*H149mm 大锥形杯垫。 防触电保护类型：类 Multifunctional Mug Press Power: 500W MAX (‡5%) (subject to the accessories used) Voltage: 110~130V exchangeable, 50/60 HZ Silicon Mat Size: * 50-75mm for 6-10 oz mugs; •75-90mm for 11-22 oz mugs; • 70-75MM for H 22CM ©90*H98mm for 12 oz Latte Mug; +88*H149mm for 17 oz Latte mug Protection against Electric Shock Type: I C€ MADE IN CHINA 瞽告 本机必须使用带有接地保护的三芯插 座及漏电保护器开关！ Warning: This machine must be in application with three pin grounding plug and RCDI

[@SnazzyMoonDesigns]

Unfortunately it is all in Chinese

[@Kraftydesignsbyopie]

So with this sleeve you dont need parchement paper right? I just received mine and cant wait to try this Wow

[@SnazzyMoonDesigns]

That is correct!

[@ChaunaCasteel]

Where did you get the tumbler press from?

[@SnazzyMoonDesigns]

I bought it from a lady on Marketplace

[@ChaunaCasteel]

@@SnazzyMoonDesigns Can you share what brand it is(

[@SnazzyMoonDesigns]

@@ChaunaCasteel It is all in Chinese so I don't have a clue! Sorry!

[@annedeppeler354]

Can you use silicone bands in a tumbler press? I'm having a terrible time with ghosting.

[@SnazzyMoonDesigns]

I tried that and it does not work very well. I do have a new video that shows you how to sublimate a tumbler in a tumbler press without silicone sleeve or bands. Thanks for watching!

[@ne0njm]

Good morning, could you tell me the difference between making the tumbler with the silicone wrap and without it?

[@SnazzyMoonDesigns]

The silicone wrap helps keep pressure around the design which will help eliminate the ghosting around the tumbler. It can also replace shrink wrap that is used when baking in a convection oven.

[@purplepassion7029]

Can you use sleeve in a convection oven

[@SnazzyMoonDesigns]

Yes you can

[@aanderson0772]

@@SnazzyMoonDesigns would it be the same time and temperature in the convection oven with the sleeve as when you use the shrink wrap? I have a Tiffany colored tumbler I will be working on.

[@andyleal2583]

can you please get me the link for the silicone sleeve?

[@SnazzyMoonDesigns]

www.amazon.com/Seamless-Silicone-Sublimation-Straight-Convection/dp/B09KGN2V9F/ref=sr_1_5?crid=2B7BGO2DQXQYS

[@Goodellsam]

Can mugs be done in oven?

[@SnazzyMoonDesigns]

Yes they can be done in a oven but it is a lot easier to do them in a mug press

[@Mark-ob8nh]

Where do you get that silicone sleeve and the tape dispenser

[@SnazzyMoonDesigns]

Both from Etsy

[@Cookie-mw3xu]

What the brand of the cutting paper machine

[@SnazzyMoonDesigns]

It is a CARL rotary cutter

[@Cookie-mw3xu]

Thank you

[@flavormaker]

When you cut the tape, let the end on the roll stick to your scissors. That way you don’t have to fish for the end of the tape every time.

[@SnazzyMoonDesigns]

Thanks I will try that

[@cclemons7853]

What press is this ?

[@SnazzyMoonDesigns]

I am sorry I do not know what press it is because it is all in Chinese!

[@sherrylynn7771]

What temperature and time do you do for black designs?

[@SnazzyMoonDesigns]

I use 350 for 5 1/2 minutes turning once at 2 1/2 minutes. All ovens are different and what works for me may not work for someone else with a different oven. It took me several tries before I found the best setting for my oven.

[@debbielittle6956]

@@SnazzyMoonDesigns what settings do you use for black design in a tumbler press

[@lornacantu6255]

Someone please help me understand something,so I did a tumbler yesterday with photos one of the photo the girl had dark brown hair but when i unwrapped the tumbler it looked like a light brown..is it temperature,or do I need to adjust my printer?? TIA

[@SnazzyMoonDesigns]

You probably need to adjust your printer settings

[@moemac8691]

i can not get my sleeve to go on like that AT ALL lol

[@SnazzyMoonDesigns]

Yes they are a pain in the butt to get on and off!

[@moemac8691]

@@SnazzyMoonDesigns I didn’t know if there was a trick I was missing lol

[@keronaus6914]

I woulda thought you wouldn't need that much tape with a sleeve

[@SnazzyMoonDesigns]

The sleeve does not work very well for me! I don’t use it anymore. Thanks for watching.

[@nashvilletransfers]

I tried the sleeve and was a hot mess. I see a reply where u stated the same May i ask what is your method your using now?

[@SnazzyMoonDesigns]

@@nashvilletransfers I don't use the sleeve or the tumbler press. I only use the oven with shrink wrap which give me the best results.