Dear lord of the internet, a million thank you's! I've never gotten dynamesh to work for digging holes or carving out other objects. I picked up core'21 to try it out after having a stalled copy of 4r6 that has refused to update after many attempts to the contrary so I can finish a set of prints. Man, finally!!!
@Sephiroth4luvrs4 жыл бұрын
Trying to figure this out was why I gave up the software in the first place. I hope you know how useful you have been!
@alannachristy59353 жыл бұрын
this was exactly the very specific tutorial i was looking for!
@paulnguyen30693 жыл бұрын
Truly for clean subtacting! Great video
@IgnisPhoenix3 жыл бұрын
lol. Good stuff. And you being as confused as me was great for a laugh.
@jkraken53613 жыл бұрын
Thx bru :3
@demonicpoocreations99665 жыл бұрын
You are really good at explaining things. Your speed is helpfull. I hope you do more videos like that are meant for novices and noobs like me.
@tridibutik75583 жыл бұрын
Thank you sir it was very useful
@TheKevphil6 жыл бұрын
Yeah, this is a really great help for us lowly CORE users! ;) Once you get to the very end, can you use HPolish to smooth the edge? In any case, thanks very much for this guide!
@animateclay6 жыл бұрын
Thanks Kevin, as for HPolish - it's worth a try. You would have to make sure that your Z Intensity slider is very very low when you do it. Maybe around 8 if you use your mouse. Especially on any very sharp edges.
@TheKevphil6 жыл бұрын
Does ZBCORE have edge loops or panel loops like its big brother?
@animateclay6 жыл бұрын
I don't think it does. Not long after this video I had the resources to get full version of ZBrush, so unfortunately I can't check.
@TheKevphil6 жыл бұрын
I understand. And Congrats!
@nerdstuffandreviews75785 жыл бұрын
Thanks so much, this was really helpful!
@kitebabe054 жыл бұрын
Helpful but confusing for a beginner like me. And why it looks bumpy on the edges?
@belkmaster6 жыл бұрын
This was great, thank you! I've been looking for a way to do this in ZBrush core for so long! How did you get the colors to be the way you have them? Mine just shows everything gray.
@animateclay6 жыл бұрын
Thanks Nathan, to change the colors you can click that red ball in the lower left side of the screen in Core. It brings up different materials, if you click any of them it changes the look.
@misamalirizvi16104 жыл бұрын
if I make a Boolean...is it Possible to somehow make the Edges "Filleted" or "Chamfered"....
@animateclay4 жыл бұрын
Not sure, but if I remember right - hard edged modeling is limited in Core. You can do that in the full version fairly easily.
@bbmbbf6 жыл бұрын
Thank u so much!. really need that info
@DarioScaramuzza7 жыл бұрын
thank you this is really helpful!
@animateclay7 жыл бұрын
Glad to help Dario!
@izvarzone5 жыл бұрын
Doesn't look clean to me, too much jagged edge.
@animateclay3 жыл бұрын
You can raise your Dynamesh levels higher for even cleaner geometry - if you so desire it.
@yehudiel45886 жыл бұрын
how do you make transpose look like that and not like the 3 orange circles?
@animateclay6 жыл бұрын
I'm not too sure Yuhudiel, I bought the full version of ZBrush soon after this video. I would do a search here on KZbin on the transpose tool and see what pops up.
@yehudiel45886 жыл бұрын
yeah, searching with you buddy, i thought it was innate with zbrush core but you have 4R7 which i have so i asked :)
@uppalong5 жыл бұрын
It's toward the top of the window. A few buttons to the right of the 'LightBox' button is a sphere with a bloated triangle in it. You hit that you get the Gizmo 3D. Uncheck it to get back to the transpose tool.
@scotthoover66896 жыл бұрын
Does zbrush not have a smooth tool that could be used to clean up the edges?
@animateclay6 жыл бұрын
Not in ZBrush Core to my knowledge. I now have the full version but this was always a big issue for me in Core. In Zbrush full there's a thing called zremesher which cleans the mesh up really well in most cases.
@scotthoover66896 жыл бұрын
animateclay so do you like the full version of zbrush? I have 3d coat but I like some of the stuff I see on zbrush and have been wondering if it's worth getting
@animateclay6 жыл бұрын
Oh, you'd love it. You can do so much with it and if you plan to use it for any sort of work related project - definitely worth the money. One of the things about it is the online community is really big and finding tutorials really easy. There are also tons of free things you can download for it such as materials and textures. Even some models are free for use in some places.
@michaelpeterson70033 жыл бұрын
when i merge it adds not subtract? and yes i did all you asked
@animateclay3 жыл бұрын
There's a little subtract icon you'll need to click that looks like two circles to the right of your subtool. You didn't click it first. I think it's dumb that ZBrush doesn't just make those a + or - sign but that's what they did.
@apantrasansson2 жыл бұрын
@@animateclay Hi, did that but nope. It still merges the two rather than subtracting, even though the mesh subtool below the main one is marked as 'remove'. Puzzling this is. Free tools on the net have this figured out, but not ZBrush?
@animateclay2 жыл бұрын
@@apantrasansson did you Dynamesh it after you subtracted? The subtraction will first merge them, then remove the subtraction object after that step.
@apantrasansson2 жыл бұрын
@@animateclay There you go! Asleep at the screen apparently :) Ofc I forgot this and will test! Thanks.