How to SUPER Clean & CERAMIC COAT Wheels

In this tutorial, we'll show you how to ceramic coat wheels! ceramic coating is a great way to give your wheels a new look and make them easier to clean.
Ceramic coating is a quick and easy way to give your wheels a new look, and it's a great way to make them easier to clean. In this tutorial, we'll show you how to ceramic coat wheels step-by-step. This process is simple and easy to follow, and it will give your wheels a new look that will make them look more professional!
Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
Wheel Discount: rexracingwheels.com/discount/...
- Use code "vroomfreeship" for free shipping
Ceramic Coat: tinyurl.com/armorshieldIX
Wheel Cleaner: amzn.to/3PCy0l4
Strip Wash: amzn.to/3oyTTrI
Iron Remover: amzn.to/42cjB2U
Clay Mitt: amzn.to/3IGGxAA
Clay: amzn.to/3pUqZTz
IPA Prep Spray: tinyurl.com/IPAPrep
Wash Mitt: amzn.to/426ovPf
Tool Kit: kit.co/fritzramos/bmw-mechani...
Video Gear: kit.co/fritzramos/filming-gear
If you are looking to get started on KZbin, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
00:00 Why you Need to ceramic coat your wheels
00:25 BEST time to Coat your wheels
00:55 Wheel Preparation
04:38 Ceramic Coating the wheel
05:48 Getting into the tighter areas
07:09 DON'T Coat this section
07:25 Cure Time
08:09 How long does it last
08:34 Recommended Tire Dressing
08:54 WARNING!!! Check for THIS!

[@sankey5915]

Exactly what video i was looking for today, thanks Fritz!

[@grimmlock25]

Video is so detailed. Bro I’ll pay you to ceramic my new wheels!! 😫 😎🤘🏼

[@Ara_Milan]

bro how many layers are recommended , and is it able to do multiple layers after that 10 minute whipe off?

[@aaron81931]

I watched your video yesterday of when you changed the Oil Thermostat to the Mossellman. Since you drained some of the coolant first, how did you move the car to drain the oil with low coolant? or does that not matter as long as you don't run it too long?

[@TheSneakylemur]

This might be a dumb question but would you not want to apply the strip wash as the final step (after removing chemicals and polishing) to insure the ceramic coat adheres directly to the clear coat?

[@804MRMAN]

Yup! If your wheels come from the factory clear coated, all you need to do is wash them with a normal none abrasive soap. Then ceramic coat. You can clay it if you want before the ceramic, but it's not needed if your wheels have never seen the road or they were properly stored.

[@TheSneakylemur]

@@804MRMAN awesome thanks man!

[@804MRMAN]

@@TheSneakylemur No problem