HOW TO CLEAN, PROTECT AND MAINTAIN YOUR WHEELS !!

[@PanTheOrganizer]

⬇🔶 LINKS TO QUALITY DETAILING PRODUCTS & TOOLS ⬇⬇ 🇺🇸 For people in USA: Gyeon Tire Cleaner: amzn.to/2V4DGpN Gyeon wheel brush: amzn.to/2EjGH0d Gyeon Smoothie Wash Mitt: amzn.to/2Ehaab0 Gyeon Bathe shampoo: amzn.to/2TWEYTM Gyeon Tar: amzn.to/2EgikjF Gyeon Iron: amzn.to/2EhQ2Fq Gyeon Clay: amzn.to/2Eid5Af Gyeon Clay Lube: amzn.to/2XcEYAU Gyeon Silk Drying towel: amzn.to/2EiYCUA Gyeon Prep: amzn.to/2IlbvBy Gyeon Rim coating: amzn.to/2NfCPQk Gyeon microfiber suede applicator cloths: amzn.to/2tsqgIt Gyeon Tire dressing: amzn.to/2tsq7op Gyeon Wet Coat: amzn.to/2V4w7zq Gyeon Tire Express: amzn.to/2V4wxG0 Gyeon Bald Wipe microfiber towel: amzn.to/2U0u8MI Gyeon Polish Wipe microfiber towel: amzn.to/2V3sycN Tuf Shine tire brush: amzn.to/2BKNQVs Detail Factory boar hair brush: amzn.to/2XfuCAv Adam’s tire dressing applicator: amzn.to/2GUPdnN Car dryer: amzn.to/2DZ5ViN 🇨🇦 For people in Canada: Gyeon Tire Cleaner: bit.ly/2Gy7wQv Gyeon wheel brush: bit.ly/2XaWeGV Gyeon Smoothie Wash Mitt: bit.ly/2V5lNHn Gyeon Bathe shampoo: bit.ly/2NbjFLJ Gyeon Tar: bit.ly/2SWYmTq Gyeon Iron: bit.ly/2EjI9Qd Gyeon Clay: bit.ly/2V5L5FC Gyeon Clay Lube: bit.ly/2DRXuGc Gyeon Silk Drying towel: bit.ly/2tvGfp2 Gyeon Prep: bit.ly/2XaDKq8 Gyeon Rim coating: bit.ly/2tuoA1f Gyeon microfiber suede applicator cloths: bit.ly/2SKQ1D7 Gyeon Tire dressing: bit.ly/2NcCNJe Gyeon Wet Coat: bit.ly/2T2Giav Gyeon Tire Express: bit.ly/2Gxi2r5 Gyeon Bald Wipe microfiber towel: bit.ly/2Ej0rAU Gyeon Polish Wipe microfiber towel: bit.ly/2IwufhM Tuff Shine tire brush: amzn.to/2NidNjN Detail Factory boar hair brush: amzn.to/2BJPLtx Tire dressing applicator: amzn.to/2DWzBNC Car dryer: amzn.to/2BKO52O 🇬🇧 For people in the UK: bit.ly/3fgoENJ 🇫🇷 For people in France: c3po.link/QCWWjkv74R

[@sabumiah3421]

Pan TheOrganizer Your channel is my favourite KZbin channel! Thanks for sharing!

[@PanTheOrganizer]

Thanks Sabu! I appreciate it!

[@21ZacDUDE]

This guys wheels are probably cleaner then my dinner plates.

[@PanTheOrganizer]

😎👍🏻

[@jahdel.j]

Nice video pan thanks.will check it out. have you did a review on the mcculloch steam cleaner mc1385?

[@PanTheOrganizer]

Yes, here: kzbin.info/www/bejne/rJDZk6iLpMydmpY

[@Solefresh10]

Could you make your own mix for the prep? Mix alcohol with water to prep the wheels

[@PanTheOrganizer]

50% isopropyl alcohol and 50% demineralized water

[@lsaichai]

Esoteric stated Gyeon Rim flash time is 10 to 15 seconds, did you have any issues buffing it off since you waited a bit longer ?

[@PanTheOrganizer]

No issues. I work in a controlled environment with perfect temperature and humidity.

[@kuattro2689]

Not even 3 minutes in and it's already liked. Love your videos!!!

[@PanTheOrganizer]

Thanks!!

[@twonames8440]

Just used the Gyeon Iron the other day. My wheels were BLEEDING purple. So much so I thought I somehow pierced the brake line and it was brake fluid leaking down haha crazy product! Great video Pan as always!!

[@PanTheOrganizer]

Thanks Kaitlin!!

[@JackOfHearts42]

Any discount coupon codes? I was thinking of getting some Gyeon products from Carzilla. Really great content!

[@willoverkill]

Carzilla in Calgary is awesome to order from. No discount codes I know of though sorry.

[@misaak1898]

Nice job Pan again, and you make a great videos! I like a Gyeon products and I will apply a Q2 Rim into my white Civic Type R Enkei wheels too for a summer season. I'm very curious on finish look. :) I'm looking forward to the next detailing video from you. Have a nice rest of day. ;)

[@PanTheOrganizer]

Thanks Michal! Have a great weekend!

[@portoss44]

Bonjour Pan pourriez-vous faire cette vidéo en français merci continuez comme ça vos vidéos sont top😉

[@PanTheOrganizer]

Merci Damien!

[@inxs13]

That’s my man ! Wish I could give you an extra thumbs up for the big Paaan ! 🤘🏼 awesome video

[@PanTheOrganizer]

Hehe thanks! 💪🏻👊🏻

[@Car-Loverz717]

Thank you !! 👏😊 I have used - TEC 582 CERAMIC DETAIL SPRAY , bead maker and meguiars detail spray. I would one of them during the maintenance wash. Depending on what I have had available during the detail. That’s the products I’ve used to protect the car and rims. I really like the video you made on ceramic coating on the paint and wanted to ask about the rims :-)

[@PanTheOrganizer]

Thanks John!

[@superameric8]

Weekends are better with Pan! Thanks for all the great info.

[@PanTheOrganizer]

Thanks!! 😎👍🏻

[@jochenhoubaer73]

Great video again Pan! Planning to coat my new wheels. (new car arriving end of March). I've already wrote the steps down from your previous video's. Only difference is that I'm going to coat them With Carpro D'lux. :-).

[@PanTheOrganizer]

Thanks!

[@MrPuthycoupe]

Have you done raw polished aluminum wheels ? If so what products do you use

[@ruimarques_]

Another great and informative video. On a side note, you blasted past 200k subs like it was going backwards ! 😁 👊

[@PanTheOrganizer]

Thanks Rui!

[@zertoxe6908]

tu peu fait la video en francais stp? merci

[@themachine8009]

Third. Hello. If I’m doing paint correction do I need to do an IPA wipe down after the compound or just after the polish? Or both? Thanks in advance.

[@misaak1898]

I think, that it is better use an IPA mixture after every step of paint correction, 'cause some pastes can masking a paint inperfections. But very important is a final IPA defat step because from it matters a durability of your applied protection. :)

[@ryanott6763]

it wouldn’t hurt to do both, but you need to do one after whatever your last step before applying protection is

[@ZacBurke2]

Thanks Pan!!! Your channel is awesome! Really great to see some CarZilla links, they are amazing and that is where i get all my detailing supplies. I watch your videos then rush down there for the products! Keep up the awesome videos!

[@PanTheOrganizer]

Thanks!!!

[@aaron1984a]

Carzilla for the W!! Another secret gone! There shipping and lack tax for CDN buyers makes it the best source for all of Pans mentions. Had two deliveries this week and my car isn't out of storage for 6 more weeks!!

[@johnwilliam8366]

Not even 1 minutes in and it's already liked. Great Video Pan. Just what I needed for my new car.

[@PanTheOrganizer]

Thanks for your support John!!

[@sivakornamatavirakul9391]

Thank you for bringing PAAAAN the organizer back. I really miss this gimmick. :-)

[@PanTheOrganizer]

💪🏻👍🏻👍🏻👍🏻

[@AActionHomeInspectionHouston]

Great how to video, definitely giving me ideas for new how to videos on my Channel.

[@PanTheOrganizer]

thanks!

[@francismarseneault9856]

Pan, can you use this product on matte black finished wheels? Thanks!

[@algirdaslaurinavicius1539]

Hey, I have the same question too. Did you find out or tried?

[@francismarseneault9856]

@@algirdaslaurinavicius1539 did not find out and did’t try, sorry!

[@ihop4no14]

Great video! I did my wheels last year using GYEON Q2 RIM EVO and was very pleased. I opened the bottle about six months ago. Can I use the product on another vehicle, or does it have an expiration date?

[@PanTheOrganizer]

Normally, once opened, coatings are good for 1-2 months at best.

[@crazyyyxdmv749]

i was waiting for so long for a video like this! Thanks Pan for this video it helps me allot! :p

[@PanTheOrganizer]

Thanks!

[@dantesolis318]

would a steam cleaner be a good idea to use cleaning wheels since less harsh chemicals to brake down the wheels

[@RaylinAquino_]

Could I use the carpro c Quart 3.0 for wheel?

[@PanTheOrganizer]

You can, but wheel specific coatings have a better durability on wheels. They are made to resist higher temps.

[@RaylinAquino_]

@@PanTheOrganizer Thanks, What another products of ceramic coating for wheel do you recommend?

[@Exoseven]

Pan, you said to throw away the microfibre towels after using the ceramic coating... is it the case when applying Turtle Wax hybrid ceramic spray coating & ceramic wet wax?

[@PanTheOrganizer]

No

[@nicorallysport]

Not French 😭😉 Bonne vidéo sinon 👍

[@PanTheOrganizer]

Merci!

[@roberthughey4188]

This video is 3yrs old and I'm just watching it now. Are there any updated products to protect the rim that you recommend? If you have an udated video for a rim protector and you share it with me?

[@PanTheOrganizer]

This is still valid. I made a wheels of detailing tutorial here: kzbin.info/www/bejne/aX2mgmOdap1spq8

[@qg_detailing_]

Il y aura une vidéo en français ?

[@PanTheOrganizer]

Pas pour le moment.

[@micka3412]

La vidéo en français ?

[@PanTheOrganizer]

Pas celle-ci

[@jagerbence]

Can Gyeon Rim used on exterior plastics? I know there is a specific product for the trims, but I am curious.

[@PanTheOrganizer]

No. On plastics, you use this: bit.ly/3BQ8WS7

[@miwanna4139]

Full gyeon detailing video next?😜 actually not found a singel video with full detailing only using gyeon. Great video🤩

[@PanTheOrganizer]

Thanks!!

[@StickNclutch]

Hey Pan so basically this product Q2rim ceramic coat of wheel protect is almost the same as a carnauba wax for wheels like ammo gelee wheel protect?

[@PanTheOrganizer]

More durable. A ceramic coating has a higher resistance to extreme temperatures and chemicals.

[@250Pants]

Hi Pan, what would be the equivalent products in the Car Pro line? And is the process the same with Car Pro?

[@PanTheOrganizer]

Yes they are pretty equivalent. At CarPro, it would be the DLUX wheel coating, which I applied on my own previous BMW in this video: kzbin.info/www/bejne/mqSmnn2AebVmrtE

[@baderaltami6737]

Thank you pan you are really HELPFUL. and we waiting the next one again and again 👍🏼keep going man I mean pan✋🏼😄

[@PanTheOrganizer]

Thanks!!

[@andyguildford]

After applying Gyeon RIM how long should I wait before refitting the wheels to the car?

[@PanTheOrganizer]

You can put the wheels back on the vehicle after the application. But don't drive the car, and don't expose to water or rain for 24 hours. Always follow the instructions.

[@willoverkill]

I purchased Sonax Spray and Seal for topping up protection on my wheels, think I've seen you use it before too, should I consider switching to Wet Coat?

[@congo4900]

Pan knows the tyres!! best winter tire!!! Nokians!! as always, another great video, thumbs up!

[@PanTheOrganizer]

Thanks Congo!! :)

[@andymorris4760]

Pan, full credit these are the best vids by far. Hope your able to help with this one... I have raw freshly polished BBS RC aluminium wheels (Nicely done, but not mirror finish). Car only leaves the garage for short spins when dry. Please can I ask.... 1. Are the following products suitable: Wax, Sealant, Ceramic coating, graphene coating. 2. Which product would you recommenced for best finish and easy maintenance? Many thanks bud..

[@PanTheOrganizer]

Thanks for the kind words Andy. As per Gyeon's own statement: "There are various wheel rim types available on the market, e.g. wet painted, powder coated, anodized or polished. Q² Rim is an appropriate product to protect each and every one of them. Even the owners of models with polished rim lips have observed that the need to refresh the so-called mirror effect is significantly less frequent."

[@andymorris4760]

@@PanTheOrganizer Pan, appreciate the rapid reply, guess ceramic coating is the way forward then... These forums certainly cut out the guess work, thanks for the Q-Rim recommend. Cheers bud

[@projet2907]

Gyeon has Such a beautiful line of attractive quality Products. You drive your car in our winter? Thank you for this Video Pan.

[@PanTheOrganizer]

Yes I drive it all year round. It’s so well taken care of that you can’t tell it’s been through winter. Plus, if I pay that much for a car, I have to enjoy it every day. ;)

[@projet2907]

​@@PanTheOrganizer ​ Oui,,, good ⭐️ surement beaucoup plus confortable pour passer un bel hiver!! It must be magical to watch the powder snow just Glyde off the surface. Pan, all this safe on aluminum wheels / Chrome bumper?,

[@Ozzcaddy]

G'day Pan, First off, good to hear your using some Aussie lingo (twice) "no worries"! Question: Not knowing how long before the ceramic coating begins drying on the applicator or MF towel, should you Clean and Prep ALL 4 wheels before applying ceramic coating, or is there sufficient time in between doing one wheel at a time? Again another excellent video. Ozz

[@PanTheOrganizer]

I clean all the wheels at once. Then prep all the wheels at once. Then I coat one wheel at a time, buff off the coating and move to the next wheel.

[@Ozzcaddy]

Thanks Mate.

[@PanTheOrganizer]

👍🏻

[@jeanyvesgiguere6666]

As usual Pan, you’re the best. Tu nous donnes le goût que le printemps arrive au plus vite pour aller mettre tout ça en pratique.👍 Tes commentaires live, c’est vraiment super.

[@PanTheOrganizer]

Merci mon cher! Moi aussi j’ai hâte au printemps!!

[@jimgee2676]

pan love your video and with that aside I have a question for you ,I was offered a car wash location to operate myself instead of running around from house to house garage to garage to clean cars , my question is the deal I am offered is as such , I have my own garage rent free ..electricity free..all the water supply I can use ..all washing and detail products I use all paid for by land lord from soaps to ceramic coat products to brushes to hoses buckets etc all supplied to me on my demand and need , but I have to split all my washes 50 50 with landlord and 70 me 30 landlord for detail jobs basicly if I do a complete ceramic coat job and charge 600 I will subtract 200 for parts and have a 400 dollar froffit and I will keep 280 and landlord will get 120 ////do you believe this is a good deal or should I keep being a mobile detailer ...the only thing I am thinking of is the winter months where its super quiet for me for detail jobs but if im in a garage I can wash a gazillion cars during winter months ..so please tell me if its a deal I should take or keep doing what I am doing as a mobile car wash /detailer ...thank you

[@DrKerr..]

Great video pan u doing another one lol. Your voice is so chilling. Enjoy the rest of your day!

[@PanTheOrganizer]

Thanks!

[@ynte8114]

Hi Pan, when we apply ceramic coating,do we throw away the products that we used to apply the ceramic coating? Just wanting to make sure. Greetings from 🇩🇪

[@PanTheOrganizer]

I always throw away the towels and applicators used to apply ceramic coatings in glass bottles. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@ynte8114]

@@PanTheOrganizer Thank you for the reply Pan 👍🏻

[@wjohnsonism]

I just bought a F80 M3. Perfect timing to learn how to properly take care of its wheels.

[@PanTheOrganizer]

Congrats on the M3! I hope you watched my black BMW M3 detailing video? Here: kzbin.info/www/bejne/hZu0kql_es6Koq8

[@wjohnsonism]

Pan TheOrganizer..I did indeed. That video was the reason for subscribing. Keep up the great work.

[@Detailpops]

Y’all ever have an issue with weights not sticking because it’s coated on the barrel now?

[@PanTheOrganizer]

The weights are on the wheels before you apply the coating. So it’s a non issue.

[@robertowens2133]

You are the best person that I’ve soon, on making your vehicle stay looking good, I have an Lexus, Silverado, and Cadillac truck, all look very clean, thanks to you, keep up the great work, I wat h all your videos, all the time, one other thing, I purchased an pressure washer too !! Thank you

[@PanTheOrganizer]

Thanks for the positive feedback Robert! I appreciate it!

[@robertowens2133]

Now I’m washing the cars better then before!

[@PanTheOrganizer]

😎👊🏻👍🏻💪🏻

[@alexanderdelossantos2238]

Hello Pan, are there any videos like this with a different coating brand?

[@PanTheOrganizer]

The procedure is pretty much the same regardless of which wheel coating you are using. You can see us apply CarPro DLUX wheel coating in this full detailing video: kzbin.info/www/bejne/e5DGnGB-o5Z0rKcsi=fSc0OEiYmGVG28k9

[@amac8487]

Step 1: Spend hundreds on wheel care products Step 2: Spend hours applying said wheel products Step 3: Admire how clean and perfect they are Step 4: Realize they will probably never look like that again, so you refrain from driving your car ever again

[@PanTheOrganizer]

😂😂. Oh come on now Aaron! Some people love detailing and driving their cars. I have 220,000 subscribers who think like me. To each their own.

[@amac8487]

Oh trust me, I do think like you. My 100s of dollars and endless micro fibers are a testament to that.... doesn’t mean I’m happy about it though 😑. Hahaha. Just playing. I enjoy the process, but sometimes I ask myself is there something more productive I could be doing than obsessing over these things🤷🏼‍♂️. I enjoy your videos, methods, and reviews 👏👍🏻

[@archiepezek]

Pan, I have wheels that are gloss black and clear coated that I want to apply a ceramic coating to. In addition to the steps you've outlined in your video, I would also need to polish them due to some light scratches that are very noticeable due to the gloss black paint. What is your recommendation for wheel polishing? I was going to go with some small polishing heads that attach to a drill but I wanted to see what you thought. Thanks for all you do.

[@akent46]

Pan the man...should I change microfibers to level it off if doing the wheels takes me an hour for eg... how long until it cures too hard in the microfiber is what I mean.

[@PanTheOrganizer]

You have a few hours before having to worry about the crystals hardening in the towel. You can do all the wheels, and discard the towels when you're done.

[@akent46]

@@PanTheOrganizer thank mate 👍🏼

[@ji8651]

Hey Pan, I am wondering if you can get your hands on any Poorboys products? Such as their glaze & their multitude of polishes, etc.

[@Norcalw204]

The rims look great on your car!

[@PanTheOrganizer]

Thanks!

[@toddhalstead5038]

Once again Pan you have knocked it out of the park. My summer wheels are sitting in the garage and now I want to coat them! I have a question though, it looks like someone marked the wheels with a marker on the barrel to signify right, left, front and rear. How would you suggest to get this off of the barrel? Thanks again Pan, and keep up the great work.

[@PanTheOrganizer]

Citrol266 :)

[@toddhalstead5038]

Pan TheOrganizer are there any precautions I should take before using this?

[@PanTheOrganizer]

It can break down older waxes or sealants, but a non issue as you’re using this on wheels. Just thoroughly rinse after use. That’s it. Great to remove tar and glue residue, even bugs! I did a video about it for use on bug splatter here: kzbin.info/www/bejne/f4W1dGuYg6-efqc

[@ejoautovideos]

Great how-to Pan! One question; is it ok to use on the rest of the cars painted panels? (I have half of a bottle left that I don't want to go to waste)

[@PanTheOrganizer]

No. This is a rim application.

[@Midnytcowboy]

Hello thank for the informative video. I just bought brand new wheels for my f10. Haven't installed them yet. Do I have to follow these exact steps to protect the wheels before I take the car to garage to put in new tyres tyres on thm.

[@PanTheOrganizer]

I would do this after the tires are installed. Watch my wheels off detailing video: kzbin.info/www/bejne/aX2mgmOdap1spq8

[@Midnytcowboy]

@@PanTheOrganizer thanks

[@mohammedseedat3199]

Love the videos however why is it that every product is amazing, personally there needs to be a follow on video, for example 2 weeks later of driving how it actually works or does it actually last because im sure most wont

[@ritmoantiyano1551]

Very good,can the protector be use on chrome also?because the edge of my rims are chrome

[@PanTheOrganizer]

Yes it can be applied to chrome, and also various wheel rim types available on the market, e.g. wet painted, powder coated, anodized or polished.

[@juicesanchez1]

That's more than a couple of drops Pan.

[@PanTheOrganizer]

LOL

[@JPTinioMedia]

Hi Pan, I have brand new wheels that arrived from Japan 2 days ago and just had new tires mounted onto them! They haven't been on a vehicle snd have been in bags since today. Do I need an iron remover before applying the ceramic coating on brand new wheels?

[@PanTheOrganizer]

No need for iron remover if they're brand new and have never been on the road. Just clean them, use the IPA or paint prep (like Gyeon Prep) and then you're good to start coating.

[@JPTinioMedia]

@@PanTheOrganizer perfect. One final question, I'm using carpro dlux and I'll be applying it in my house ventilated. The temp my basement is at is usually 18-19c am I going to have to wait longer than 1 minutes? I'm told the colder it is the longer you have to wait before leveling

[@PanTheOrganizer]

You will see as you apply. 18-19C is actually fairly close to the temperature I usually like working at (20C). If it gets too tacky, it means you waited too long. In those conditions, 30 sec to 1 min should be fine.

[@stevenjones19-m8i]

Awesome video Pan,the wheels always look a lot better clean when this way is done.

[@PanTheOrganizer]

Yup!

[@richardseem7948]

another great comparison and product review Pan.thanks again 👍👍

[@PanTheOrganizer]

Thanks!!

[@jmullerxx]

looks like a good cleaning process for my forgestars coming in! you always change products too hahaha so i always do whatever you are currently doing🤣

[@PanTheOrganizer]

Heheh thanks for watching Jamie!

[@jmullerxx]

Pan TheOrganizer of course!! btw do you know if the ceramic coating would be safe to use on a satin black finish? verde axis wheels lol my friend got them for her lex but i didn’t know if she could use the same coating as me or not

[@PanTheOrganizer]

CarPro DLUX and Gyeon Rim can both be used on satin finished wheels.

[@trevormuggeridge4560]

Great step by step guide , thanks for sharing. 😁👍👍

[@PanTheOrganizer]

Thanks Trevor!!!

[@ImChench]

Love the vids Pan! I'm looking into applying Gyeon on some new wheels I got but I noticed the wheel finish on the spokes have a sorta sandpaper finish to them versus a smooth finish, could the Gyeon still be applied with no problem?

[@patrickdanforth7700]

Good sponsor and another great system for wheels. Systems are the a must.

[@PanTheOrganizer]

Thanks Patrick!

[@alexerickson9266]

Any advise on restoring or managing wheels with some oxidization? Bought a new vehicle and the Helo wheels that are on it need some work.

[@K_I_P733]

I've used Chemical Guy's Wheel Guard to protect my rims on my car. It's like a paste, or even looks like wax that would come in a jar. It goes on easy, and must stay for 15min I think. It gives a high shine, helps prevent water spots, and brake dust from sticking. It also makes cleaning the rims easier. P.S. I'm a detailer too.

[@bradc5633]

Thanks for the detailed review! I used Rim about 3 weeks ago and have to say it does it’s job. I’ve never used Wet, so curious if there are any concerns on overspray on the rotors? Thx.

[@PanTheOrganizer]

Thanks! No concerns for Wet Coat.

[@bradc5633]

Pan TheOrganizer great thx! I’ll get some on order! Anything that makes cleaning wheels easier, I’m in! 👌

[@PanTheOrganizer]

👍🏻

[@adamcarley7078]

So I guess you could say it was a..... Rim job

[@bamabladez]

Hi, sorry if I missed but why is this specific to wheels? Is this just a sales tactic? What makes this different than all the other ceremic coatings? I would much rather buy one product unless the difference is worth it? For example Adam's graphene ceremic or Armour shield.. thanks

[@PanTheOrganizer]

I am not the one formulating the products, but my understanding is that wheel specific coatings are designed for higher temperatures resistance and that harsher environment near brake pads and rotors.

[@bamabladez]

@@PanTheOrganizer 👍 thanks for the quick reply! Great work

[@PanTheOrganizer]

Thanks! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 750,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@bencook8109]

Can this be used on black matte wheel finishes without creating a shine?

[@PanTheOrganizer]

Yes

[@Juiczey]

I can't wait to spend $500 on these products to clean my wheels YAY

[@conedprepper]

Pan what pressure washer do you use and have? And is it electric?

[@PanTheOrganizer]

I have a high end electric Kranzle 1122TST pressure washer that I reviewed here: kzbin.info/www/bejne/eZuXd3emgNqCiKs

[@jonathonsampson9730]

Can you please make a video on how to wash a vehicle with rust? I have a Silverado I’ll be washing here soon and it has some rust on the bedside.

[@rayl4014]

hey,love the longer Pan introduction!!! keep it going,maybe a bit longer!!! Lol!

[@PanTheOrganizer]

Thanks!

[@rayl4014]

@@PanTheOrganizer hey,by the way can you do a video on Gliptone, they have a GT quartz ceramic line.

[@arielhernandez2911]

Do you throw away the towel after each rim or after you use the towel on all the rims

[@PanTheOrganizer]

At the end of the entire job.

[@RawGreySun]

Do you like the Gyeon products more than Car Pro?

[@PanTheOrganizer]

I like both pretty much equally. They are top tier products.

[@wasili411]

I coated my new Work wheel T5R2P by gtechniq c5 three months ago. I found some part of coating is gone in last week car wash. I park my car outside everyday and wash my car once two weeks. Especially after rain day. The way I wash my wheel is spray Adams Wheel cleaner and then 1:100 mega foam. Use wool washmit to wash rim and spoke. I don't know which step I was doing wrong cause C5 coating gets damaged. Could you help me with that

[@PanTheOrganizer]

Adam’s is a great wheel cleaner but is certainly a strong one, so will weaken any protection over time. Ideally, you would maintain your wheel coating once a month with something like Gyeon WetCoat. It takes just a few seconds to apply and you boost your existing coating. I do that on my coated wheels. See my wheel and tire cleaning tutorial: kzbin.info/www/bejne/pZ7alIGZiL6WiZo

[@wasili411]

@@PanTheOrganizer yes, I do use wetcoat on the whole car once 2 times wash. Is it not necessary to use adams wheel cleaner in every wash?

[@PanTheOrganizer]

If your wheels are coated, using a pH neutral shampoo should be ebough and then you use the wheel cleaner every other wash. If your wheels are very dirty then yes use the wheel cleaner.

[@wasili411]

@@PanTheOrganizer I appreciate it, bro

[@inderrajkewal9737]

is there also something else i can use cause we dont have it in the Netherlands

[@PanTheOrganizer]

What brands do you have access to? CarPro, Kamikaze, Gtechniq?

[@sentinurse]

Hi, Pan is it advisable to get PPF from the factory before it gets ceramic coated outside?

[@RSURRECTED]

I’ve been waiting to apply Gyeon Rim on my new summer wheels for a while, for the reason that I’m not sure if I should apply it before or after putting on tires .. im guessing the coating can help avoid “possibly” scratching the new wheels, but will the tire install machine compromise the coating? Hmm

[@PanTheOrganizer]

Wait until your wheels are mounted to the tires.

[@abhisheksreedhar7997]

❤️

[@muzammilhasan2103]

what are some wheel coatings you’d recommend?

[@PanTheOrganizer]

Gyeon Rim, CarPro DLUX, Kamikaze Stance Rim Coat and Gtechniq C5 Wheel Armor are all excellent.

[@SensibleBHPian]

Quick Question. How much durability can we expect real world once the wheels are coated? I am trying to to justify the cost and use of this product as against using Wet Coat or Hydr02 every 6 -8 months on the wheels.

[@PanTheOrganizer]

Wet Coat will only give you 2-3 months of real world protection. With Gyeon Rim, I have been seeing a steady 8-9 months in our Canadian climate, you would get even more durability in a warmer climate like California.

[@cubul32]

Does it make sense using this if I get Turtle HCW?

[@PanTheOrganizer]

This will be more durable on wheels for sure.

[@sometimes5207]

Hey Pan, I’ll soon be getting my winter wheels and they’ll be brand new out-of-the-box and so clearly most of this prep won’t apply to me. Would you recommend still doing an IPA wipe down or is this really not even necessary (as I would have to buy something like Gyeon Prep)?

[@PanTheOrganizer]

Absolutely do an IPA wipe down before applying your wheel coating. Ideally, you would use the same paint prep as the coating you're buying. If you're applying CarPro DLUX wheel coating, use CarPro Eraser prep. You want to make sure your surface is super clean and well prepped before applying the coating to ensure maximum performance and durability.

[@gman9720]

Hey Pan, during decontamination you suggest to use 2 products: Iron X + Tar remover. Why don't you recommend CarPro TRIX which does both in a single product and may save money?

[@PanTheOrganizer]

I prefer separate products. Each product can focus on a specific task.

[@adityarvics]

can u please suggest good wheel and tyre cleaner and also car soap

[@PanTheOrganizer]

Watch my best products picks here: kzbin.info/www/bejne/i33ZeJxpmcd1qKM

[@truthmatters2020]

Good morning Pan, I hope you and your family are doing well. QQ. Can I use any ceramic coating to protect powder coated wheels? Thank you

[@PanTheOrganizer]

You would have to ask the company of the coating you are buying to make sure.

[@truthmatters2020]

@@PanTheOrganizer thank you so much

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 870,000 subscribers and we have over 110 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@truthmatters2020]

@@PanTheOrganizer I really appreciate it you

[@c.h.wongco3505]

Hi Pan, i'm from Asia, been following ur detailing video for sometime.. its awesome and u did a great video on detailing vehicle up tot the tiniest detail.. After seeing ur video above on how to perform coating on wheel rims makes me eagerly to try out this Gyeon as well.. But, i have an issue, my rims have water spot.. Should i use Gyeon water spot remover first? Kindly advise which step i need to use before done the coating.. Your advise is much appreciates.

[@PanTheOrganizer]

Yes try a water spot remover first, that's the less aggressive method. If that still doesn't work, you will have to polish your wheels.

[@gabea.458]

Pan, if you wanted to top your newly coated wheels or paint, how long do you have to wait to put something like bead maker over the ceramic? Does it bond right away, or do you have to let the ceramic cure first? Also I have an idea for a video for you. I know sometimes it's cool to have a product unique for a purpose, but you end up with a lot of stuff. But what about for enthusiasts who don't do this for a living, maybe you can make a video on good products that can serve multiple uses (if you think they are good for all applications). I'll give you an example, on your Rag Company Microfiber video I heard Levi say he likes to use ONR as his glass cleaner. I've also heard people use it for clay lube, obviously waterless wash. That's could be worth buying in bulk to replace a couple other things if it was a good option. Maybe APC's (for engine, interior, )VRP type products and tires and so on could be covered. You tell us.

[@PanTheOrganizer]

Good idea. And to answer your question, let a week go by before washing the wheels and apply a topper like Bead Maker.

[@glyndonsprofessionaldetail7429]

where did you get your garden hose nozzle you are using ?

[@CLsIim]

He uses the full Eley setup: Hose, quick disconnects and the nozzle. It’s all on Eleys website.

[@PanTheOrganizer]

Eley Hose Reels professional spray nozzle set

[@PanTheOrganizer]

The good stuff. :). Do you have Eley equipment too?

[@CLsIim]

Not yet, but will be pulling the trigger in the near future.

[@gabyelb2187]

Pan tu préfère le Carpro Dlux ou bien le Gyeon RIM ? Perso j’utilise le Carpro en règles général je trouve Carpro bien au dessus après ça n’engage que moi 😊

[@PanTheOrganizer]

Les deux sont équivalents.

[@im_so_es_ef_wit_it]

Can a brake repellent spray be added onto a coated wheels like these ones?

[@Casanova102986]

how often do you recommend we do this ? thanks.

[@PanTheOrganizer]

Once a year.

[@Catacretu72]

Excellent video!!! Learning a lot from all your materials. Thank you! I have one question, please. I have seen some videos where the iron remover was the first step of the cleaning process. Is there a rule , or, does not matter ?

[@PanTheOrganizer]

The general consensus on paintwork is wash, iron remover, clay, machine polishing, IPA and then coating. Same would apply to wheels. You can skip claying and polishing if they’re in a good state.

[@xshinigamix4515]

I love your videos and my car is clean af but...damm to spend almost 20.00 per bottle i cant afford that hahaha i will keep using sonax 💔

[@PanTheOrganizer]

Thanks