How to Swap Arms and Gauntlets from One Wolverine Figure to the Other | Marvel Legends Kitbash

[@Anonymous.Throne]

Nice, The only thing I’ll say; the legacy tank top Wolverine’s flesh tone matches better than the older amazon one. Another Great video!

[@ScottsStuff14]

@@Anonymous.Throne I got another legacy collection one coming in the mail so I’m swapping the arms back on the original one. I use to display the screaming old man Logan head on that paler body

[@TvmanFAN182]

Bro you help me so much with my custom I tried to swap the arms but I broke them but I got a new one and watched this and it worked thxs so much (edit u have earned a new sub thxs so much for this)

[@ScottsStuff14]

@@TvmanFAN182 I’m glad my video was able to help you! I appreciate the sub!

[@TvmanFAN182]

@@ScottsStuff14the video was a big help

[@cervanno05]

They both look good, but I think the proportions of your first custom looks better.

[@ScottsStuff14]

@@cervanno05 I think so too. I wish the tank top arms were about 10% smaller

[@ThatOneGuyLFG]

I’m getting this wolverine in the mail in a few days and I really wanted to do this mod didn’t know 100% how to do it until I saw this video! Thanks man I will definitely be trying this.😁

[@ScottsStuff14]

@@ThatOneGuyLFG I’m glad to hear! Good luck on your customizing

[@jerwin_winowino]

The well explained MOD video. both GI Joe and Legacy Wolverine

[@ScottsStuff14]

@@jerwin_winowino I appreciate that man!

[@SilentRobStopMotion]

Another great video! 🔥🔥🔥 another great custom! Although I do love the GI Joe arms more. Such an amazing idea, thanks again. I love my figure.

[@ScottsStuff14]

@@SilentRobStopMotion appreciate it! I think as long as people have fun with the customizing process like you did it’s a win no matter which arms are used

[@SilentRobStopMotion]

@ definitely!

[@mattbell1389]

Mate this is a great vid. All the info. Well done.

[@ScottsStuff14]

@@mattbell1389 appreciate the support!

[@nomrugged29]

Thanks so much for this tutorial. I can’t wait to try it when I get my Wolverine figures

[@ScottsStuff14]

@@nomrugged29 you’re welcome! Can’t wait for you to give it a try on yours

[@RyanD1984Can]

Thanks for the follow up video. Still waiting for my D&W figures to arrive so I can try the Thor arms. The Thor arms do have a rounded end, not as large as the Wolverine arms, but definitely should be enough to snap into place and maintain the rotation. If only there was a way to remove the peg that goes into the torso from the shoulder piece and swap it into the bare arm shoulder lol I wonder how those things are originally assembled in a way that it's impossible to disassemble.

[@ScottsStuff14]

@@RyanD1984Can I need to compare the size of the shoulder hinges because I feel like with a heat and slice you could swap the hinge and have the correct ball going into the torso. Of course the Wolverine hinge would be blue though

[@RyanD1984Can]

@ScottsStuff14 the slice is something I really would like to avoid.

[@ScottsStuff14]

@ I don’t blame you. That would be a last resort thing for me

[@franklam8146]

Instead of snipping the stem off the shoulder pivot. How about pressing the stem slightly onto a hot flat surface, like the side of a heated up flat-head screwdriver or a warm iron to maybe give it a mushroom head?

[@ScottsStuff14]

@@franklam8146 that’s an incredible idea! I’m going to have to try that

[@franklam8146]

​@@ScottsStuff14 Just make sure it's not too hot, maybe press it on the side of kettle you are using to boil the water.

[@MrSeanRogers]

I ended up using the hip joint from the blue jeans Logan since he was already armless trimmed off the ball drilled a hole through and superglued onto the end of the arm peg. Trimmed the size to match the original arm peg and ball joint. A bit more work Pretty happy with how it turned out feels solid,

[@ScottsStuff14]

@@MrSeanRogers that’s a pretty ingenious idea!

[@tomascortes5107]

Awesome job mate! IMO muscles from your first costume looks better but the Legacy's matches perfectly on the skin tone. This can be fixed with wash and then you'll have a battle damaged version Greetings from Mexico!

[@ScottsStuff14]

@@tomascortes5107 yep I need to make one the battle damaged one now! Thank you

[@Cornholio174]

I think the gi joe arms look better on this only because the body is a bit smaller than the previous Hugh Jackman wolverine figures so it scales a bit better

[@ScottsStuff14]

@@Cornholio174 that’s a spot on assessment

[@ClarkKent-n8o]

Does the marvel legends cowl head fit with zd toys in terms of proportion? Planning to buy the legends one to put the head on my zd toys rescale... Thanks

[@ScottsStuff14]

@@ClarkKent-n8o the cowl head is a good bit smaller than the ZD toys head so I’m not sure it would work. You might be able to fudge it with the unmasked head though

[@michaelruiz4403]

What exact drill did you use to sand out the inside of the gloves?

[@ScottsStuff14]

It’s a Dremel I got from Lowe’s a couple of years ago. Search for Dremel on their website and you will see a several rotary tools to choose from

[@viktorkarrillo7343]

I wonder if the ravager thor arms would fit on this figure.

[@ScottsStuff14]

@@viktorkarrillo7343 size wise I think they’re pretty close to the Logan arms. The only problem is that that body doesn’t have butterfly joints so you would have to crack the torso to get the arms off

[@icebreakergamez1344]

Ty man! I wanna do a like 3 customs this video helps way better than any others thank u!

[@ScottsStuff14]

@@icebreakergamez1344 I’m glad you found it helpful! Let me know how your customs turn out

[@icebreakergamez1344]

@ I will!

[@Cenazinosaur04]

Is your shoulder pad method still compatible with the figure if the custom is using the Legacy arms?

[@ScottsStuff14]

@@Cenazinosaur04 yes, these arms shouldn’t effect the placement of the twist ties on the buttery fly caps

[@Cenazinosaur04]

@@ScottsStuff14 Let's gooooo! I just ordered a Wolvie, & I was planning on doing the shoulder pads w/the Hugh arms

[@ScottsStuff14]

@ awesome I hope your customizing goes well!

[@Cenazinosaur04]

@ update: my Wolverine came in and I managed to make it work with the Legacy arms!

[@ScottsStuff14]

@ awesome! I’m sure it looks great man

[@rena4050]

Legacy Collection Wolverine looks like Henry Cavill.🤣

[@ScottsStuff14]

@@rena4050 it’s a good stand in for the Cavillrine

[@JKevz1]

Good thing marvel legends' heads are all swappable. this logan's face is nonchalant. But I have the teeth gritting face from the white tank top Logan & the shouting face from the brown leather jacket Logan. Time to swap heads! Also, i don't care about movie accuracy. I would glue those two blue shoulder pads back on the black butterfly joints while being sleeveless for comic book accuracy. 😂 but knowing hasbro marvel legends, they always resell their old & previous releases with minor upgrades. Hoping for the re-release of this wolverine with sleeveless arms already installed, bloody claws, suit damaged & two angry heads with cowel mask on; - one teeth gritting, & the other is shouting. 😅

[@ScottsStuff14]

@@JKevz1 those other heads are great to swap on! I am hoping like you said when they make the next Wolverine he will have screaming/gritting heads

i think i will wait and see if ml gives us the no sleaves version.

[@ScottsStuff14]

It think that’s a good call, I’m just a little impatient when it comes to waiting

@@ScottsStuff14 awesome job by the way.

[@ScottsStuff14]

Thanks man!

@@ScottsStuff14 always bub i subed to by the way.

[@ScottsStuff14]

Appreciate the sub!

[@williamseneyjr.6277]

A hair dryer would be less messy and dangerous. Also less harmful to any paint apps.

[@ScottsStuff14]

@@williamseneyjr.6277 I’ve always been a hot water guy, but I will use a hairdryer if I’m trying to pinpoint a specific spot I want to heat up

[@coletrain7755]

lol well wish I knew this before I bought the tomax figure to do the swap with

[@ScottsStuff14]

@@coletrain7755 I wanted to give this one a try too, but I don’t think you can go wrong either way. A lot of people are saying they prefer the Tomax arms because of the arm size

[@coletrain7755]

@ yeah it’s just that the peg size will be different with the gi joe. Gonna have to wrap it in electrical tape in order for it to fit without being loose. Still gonna give it a try

[@Wepaonxi]

Use wire heat shrink

[@ScottsStuff14]

@@Wepaonxi I’ll probably use that in the future. I still wanted to pop these arms back off