How to Swap Connectors // FPV Freestyle

[@fullhamfpv]

Great video 👍 Cutting the positive and negative at the same time without thinking, been there done that so good on you for pointing it out 😂 Sick ripping at the end 🔥🔥🔥

[@_tcmore]

@@fullhamfpv thanks man 🙏 And yeah definitely something we have all done not thinking and it’s generally okay with 1S packs at least it won’t be a huge deal when the smoke comes 😂

[@3DMOFO2020]

Another fantastic job on both the flight and the video showing how solder these new connectors. I hope you have a "Happy Thanksgiving" Thomas😁

[@_tcmore]

Thank you 🙏 I had my thanksgiving a month ago 😂 Us Canadians have it early ! But I hope you have a happy thanksgiving S well!! 👍

[@3DMOFO2020]

@_tcmore Cool! You guys are very lucky out there 😁 Thanks Thomas

[@smika710]

i like your zelda tattoo

[@_tcmore]

@@smika710 why thank you 😊 I’ve got majoras mask on my foot as well !

[@ghostdropfpv]

Great vid on this! all mine are PH 2.0 so this could be very helpful at some point, are the PH 2.0 really that much worse? or could I just do the drone side and not see to much of a difference? the role to rewind matty is sick also !!!! not sure if that's what you call it 😅

[@_tcmore]

@@ghostdropfpv thanks man!! get rid of PH2.0 ASAP lol Huge difference if you switch over. Less battery sag, and more power. You can’t really just do the drone side because then you would need an adapter on the lipo and then get more loss. I think it’s called a half mavvy. Like a maverick loop with a half Matty in it.

[@ghostdropfpv]

@@_tcmore I was just asking for if I got the air75 and lot more to do all the batts then just the drone side, the mob feels ok in high throttle but pretty bad at low throttle for 1s PH2.0, I just wasn't sure if was because its mainly for 2s though. I just have the PH 2.0 batts from the tinyhawk ii freestyle before I did the XT30 and it felt not to bad also but its 2x 1s batts. so good to know, thank you !!!! is yours wobbly at low throttle on 1s or no? just kind of wondering if that is a 1s thing or not.

[@_tcmore]

@ I’m not really sure what you mean by wobbly on low throttle lol I don’t think mine are wobbly. If you do get the Air75 you basically have to use the betaFPV 450mAh lava batteries or something the same sized or they won’t fit in the battery tray. Even ph2.0 with two for 2S is a million times worse than XT30. I had a quad setup using two 1S lipos and when I switched to a real 2S lipo with xt30 it was a completely different quad.

[@ghostdropfpv]

@@_tcmore for me with the tinyhawk, it flys for way longer with the XT30, the power does not feel that much different though, maybe because low KV motors, not sure really, interesting though. the mob just has the extension thing and is normally XT30, and it gets very extremely unstable at low throttle on 1s. again its set up for 2s though, so not sure if I raised the idle for 1s it may fix it not sure. good to know though may just have to get some of there batts if I do then. thanks for the info ! would now do the batts if they did fit for sure though.

[@_tcmore]

@ if it’s meant for 2S it’s probably the motor kv isn’t high enough when running 1S. Probably would have to raise out motor idle and change the PIDs for 1S

[@Maxim_Nub]

Hey man. Whats your favorite build for baby turtle? 1s 2s what prop size etc

[@_tcmore]

Hey man currently I am liking the 45mm baby turtle on 1S. The one I am flying in this video is the 45mm X-turtle with the BetaFPV Air 4in1 and 1102 22,000KV motors but I would use the 18,000KV as I have a motor output limit on the quad.

[@Maxim_Nub]

@ sounds great. If i would build this i prob would use my 75pro then. But thinking to try out 2s with transferring mob8 on it. Just not sure if it worth buying mob8 and frame to try it out as im kinda enjoying already 1s with the whoops i have. Just curious which one would fight propwash (after power loops for example) better in your opinion

[@_tcmore]

@@Maxim_Nub I would avoid the mob 8 swap. The motors that come with it are 1103 and they use slightly larger screws that will put extra stress on the arms of the Baby Turtle.

[@Maxim_Nub]

@@_tcmore oh wow thanks for the insight

[@_tcmore]

@ you are welcome! Happy to help!