HOW TO SWAP SCION XB TOYOTA BB STEERING WHEEL 2006.5

[@prolificbreedaquatics]

RYOBI IMPACT: amzn.to/3KfOiN8 amzn.to/3A33TLc RYOBI BIT SET: amzn.to/3fM1WK1

[@JohnJohnson-ML574]

I just popped my air bag mine is a 2006.5 thanks for letting me know about the 2004-2006 and 2006.5 is different. Nice to know that the xa will also fit in my scion.

[@prolificbreedaquatics]

yea the 2006.5 looks better in my opinion

[@jabao9492]

You did a good job, congratulation!!!

[@PurelyAquatic]

Nice! Man I miss modding my old car..

[@prolificbreedaquatics]

I know the feeling. I got bored one day and just got this before they go extinct

[@rukeyser]

Wheel radio controls were STANDARD on the 2006xb. The only 2006xb without peanuts/radio controls steering wheel is the BASE model.

[@PabloJGarcia-ef1uh]

I did the same thing and it works great except my horn won't work. I have no airbag lights and I also have an after market radio so I don't care about the controls. Any idea how to get the horn back? I have a 2005 XB and I took it from a 2006.5 XB

[@prolificbreedaquatics]

it's just one wire you look at the pins where the original one was and relocate that one wire to the same spot

[@PabloJGarcia-ef1uh]

@@prolificbreedaquatics thank you

[@SistaWives]

can you clearly explain "moving the wiring" to get the horn to work, I'm having this problem now horn not working

[@prolificbreedaquatics]

take a look at the old airbag and the new airbag. take note of where the wire is plugged in to and look at the new airbag and plug the horn wire in the same location

[@SistaWives]

@@prolificbreedaquatics Thanks, but what wire are you speaking of?? the old horn wire is on the upper corner without a plug, The new horn wire is on the lower with a plug slot. or are you talking about the cables going into the wire harness? we have the same old and new horns. Are you saying I need to solder the plug to the upper corner of new horn

[@sf4tniners]

Does the steering wheel controls work?

[@prolificbreedaquatics]

no I ended up with after market radio

[@jefftennis3907]

@@prolificbreedaquatics What happened when you connected steering wheel controls to the after market receiver? I had to buy an aftermarket accessory for my 2010 2nd gen to get it to work with aftermarket.

[@prolificbreedaquatics]

@@jefftennis3907 I never tried connecting it. the original wheel didn't have wiring for it so I don't think it was an option for me

[@andyl9920]

​@prolificbreedaquatics that sucks. Thinking about replacing my rotted xb for an 05. The 05 doesnt have the controls on the steering wheel. The steering controls are much needed

[@sf4tniners]

Did you have to swap out the airbag module too?

[@prolificbreedaquatics]

yes I took the entire airbag it was plug and play. I only had to modify wire for the horn

[@alangonyea9046]

I tried doing the same thing but my airbag light is on now. I have been told I have to take it to a dealer to get it reprogrammed because it is a different bag. Help!

[@prolificbreedaquatics]

which car did you get the new wheel off of? mine came off an XA and the plugs fit