How to switch out a headlight bulb? | 2015 Jeep Grand Cherokee

[@gregoryfallonea2690]

Why Jeep do you make this so hard? Great video saved me hours

[@dane9445]

Good video. That fender access panel is good if you have small girl hands. If you have man hands like most people this video is very helpful. I was dreading changing this side as the passenger side gave me fits, too. For passenger side unclip the cpu and you can get at the headlight housing. Those fender panels didn't work on that side either.

[@gilgonzalez5902]

I just changed the low beam headlight bulb via the fender well access panel and it was much easier than this.

[@a2zautomasters862]

That will only work with older once 2011-2012 but on 2015 there is a bracket in the way and you can’t fit your hand.

[@uspsdaveable]

Went through the fender well , doable but a bit of a pain

[@duke6024]

​@@uspsdaveableI heard you got to have small hands to get into that hole

[@HeavyHaul51]

​@@duke6024 Small is better for a tight hole. To big and you will get close

[@michaelshaw7482]

Great video! Glad I watched it. Made it so much easier. My only issue was getting the wrong light from Auto Zone. :(

[@a2zautomasters862]

Lol. Thank you for watching and I do appreciate your comment

[@MM-ho1iu]

I got me HD blue lights and only had to change the passenger side. I get barely any light out of it. Anyone knows if lights are some how connected and if I put both the same will light up better? At this point the blue light is barely visible even if you look straight in to it from outside.

[@MM-ho1iu]

Thank you for taking the time to put this video up🙏

[@manyfeather2knives423]

Was that high beam or low beam?

[@mariodelgado6759]

There’s a access cap behind the wheel well

[@a2zautomasters862]

You can’t access the head light bulb from there. It’s only for the signal light bulb.

[@Nightowl82]

Only if you have hands the size of a kid lol

[@KALClFER]

@@Nightowl82 You mean only if you dont have hands of an average oversized American.

[@marysawin9245]

Is it the same process to replace just the daytime running light?

[@brandoncharles9667]

Great video, quick and easy

[@a2zautomasters862]

🙏🏻🙏🏻🙏🏻. Thank you for watching. I appreciate your comment.

[@kenschauer3781]

Thanks alot...good instructions...

[@JimmyS1981]

Good video, but, my 2015 Overland has HID’s , not LED’s. However, I went in the same way he did in this video. The HID’s are SO much harder to remove than LED’s.

[@aaronarmendariz8357]

Thanks easy fix thanks 2 this video.

[@a2zautomasters862]

Thank you for watching and I appreciate your comment. 🙏🏻🙏🏻

[@greenreaper6848]

This is the hardest way to change your bulb find a new video.

[@darealshow5200]

On my life

[@duke6024]

No you need a small hand to go into the hole inside the fender otherwise you got to take all the bumper stuff off That's the easiest for this side

[@greenreaper6848]

@@duke6024 I changed my headlights on my 2015 Grand Cherokee and used zero tools. Completely unnecessary to take that much of the vehicle apart.

[@KY-dx4rf]

Aaaaaand how about the passenger side??

[@a2zautomasters862]

Pass side you will have to unclip the computer from its bracket and move a side for some room Sometimes you also might have to remove the two bolts holding the coolant res tank and move a side.

[@KY-dx4rf]

@@a2zautomasters862 thank you 👍

[@marlon9191]

This is the hard way use the fender underneath

[@a2zautomasters862]

No it wouldn’t work. Some years have a metal bracket in the way and can’t be accessed from the fender area.

[@uspsdaveable]

I’ve got a 2015 and there’s no bracket on either side

[@dariushart9251]

I’m doing this now and I’m so frustrated, Easy DIY , but my hands are to big. Really don’t want to pay someone for this. March 9th

[@TwentyEight80s]

Watched this to see if paying someone to do it was worth it/necessary. I’m definitely not doing this myself lol.

[@a2zautomasters862]

Lol. Fair enough

[@stevenmennella7579]

The shop is charging $131. I will pay myself 115/hr instead...

[@johnjohnson-pf4kw]

Toyota Sienna 2015 you can do same thing in 1 minute or less.

[@darnellplan5015]

Yeahhh imma just take it to the mechanic but thank you

[@a2zautomasters862]

Lol. I know. Some times it’s easier to pay and let someone else deal with headache. Thank you for watching. 👍🏻

[@colleenhaas]

Mine went out and I was getting an oil change so I asked if they could replace it they said $100 so I said no thank you my husband will do it today and the lightbulbs $16

[@keyofdavid.]

@@colleenhaas Hi where is the bulb for 16?

[@colleenhaas]

@@keyofdavid. I got mine at advanced auto I’m in south Jersey

[@dannyg.817]

@@keyofdavid. walmart, usually is the model from silvania H11

[@rinohunter6190]

What about the other side?

[@a2zautomasters862]

Stan The Man for the other side if you can’t just fit your hand in there, remove the computer 3 X 8mm bolts and leave the wires plugged in

[@nathanwahl9224]

@@a2zautomasters862 on my '15 there was a clip and the whole ECU slipped up a bit and could be moved a little out of the way, wires still attached. Don't know about other years,

[@a2zautomasters862]

@@nathanwahl9224 true. There’re some differences depends on the year of the car.

[@tpw84101]

For the life of me, my hands are just too damn big and even with the whole air filter assembly removed I could not get my hand in there to get any leverage to twist the bulb to save my life. dealership here I come. Even worse on the other side even with the CPU removed.

[@a2zautomasters862]

It’s a bad design for sure and some can really be stock in there.

[@dirty1clean]

I paid $334 to replace a $15 low beam because I couldn’t get to it. 😡

[@a2zautomasters862]

@@dirty1clean wow. I change these all day for $40. Time to increase the price now.

[@dirty1clean]

@@a2zautomasters862 Yep! Firestone got me. I was able to change the one on the driver’s side myself but couldn’t get to the one on the passenger side.

[@mariochesser7849]

You don't show us how to get to the right side bulb

[@a2zautomasters862]

That video was only for the driver side. I will make another one for the other side. 👍🏻

[@pauliepaul3408]

Great, I’m sure my local PEP Boys will destroy my Jeep. Thanks Jeep for putting our vehicles in harms way lol! Why so hard!

[@DiyaaMo]

good job

[@a2zautomasters862]

🙏🏻🙏🏻

[@kaiwarrior2000]

Did you check your video before you posted it....you left the airbox in the way of what needed to be see

[@a2zautomasters862]

It’s not rocket Science. I showed how to remove the air box then it’s a normal light bulb removal. Twist. Righty tighty lefty losey. 🤷🏼‍♂️

[@kaiwarrior2000]

@@a2zautomasters862 not really the point ...when you make a video you should be mindful of focusing the camera on what you're doing...you might as well have had the camera pointed to the ground.

[@a2zautomasters862]

@@kaiwarrior2000 sometimes it’s very hard to fit the camera in very tight spots like that one, I could barely fit my hand in there.

[@lotofbitsabout]

How do you do the passenger side?

[@PhelpsLife]

Passenger side is a simple bulb access

[@lotofbitsabout]

@@PhelpsLife I got it out, thanks though. My husband's hands were too big for the area.

[@razrz8122]

All this to change a light bulb. SMH. Great design by Jeep. Lol.

[@a2zautomasters862]

Wait until you see the other side where you have to remove the coolant res tank and computer. Lmao

[@defects777]

People are actually saying this is too hard? lmao

[@frekkledipped]

this suks

[@DUTCHDIRTYHARRY]

Wrong

[@a2zautomasters862]

What’s wrong?

[@DUTCHDIRTYHARRY]

@@a2zautomasters862 u only have to remove 3 8 mm screws on iether front wheel well and there is your access 😉

[@DUTCHDIRTYHARRY]

I am going thrue the same thing

[@a2zautomasters862]

@@DUTCHDIRTYHARRY not true. Different years have different designs. The 2015 has a bar in the way and only accessible from under the hood. 😉

[@uspsdaveable]

My 2015 has no bracket on either side ,

[@JavierDrWeld]

How about the other side?

[@a2zautomasters862]

Other side you remove two 10 mm bolts holding coolant reservoir tank, move tank to the side, push plastic clip holding engine control module to unlock and slide module up. Now you should have enough space to access the bulb.