Рет қаралды 8,636
How 2 foxtrot:
1st: Activate continuous cr transit, 2x control rod speed, turn on the converter pistons
2nd: Raise the control rods all the way up while keeping an eye on the Neutron Rate
3rd: Control the grid by turning on and off the relief valves until the needle is almost perfectly still at 0, then press Synchronize with grid (the big red button)
4th: After its synced, turn off all relief valves and insert the control rods at 40% (you may have to put them at 35% until the temperature reaches 800 then put on 40%)
Congratulations you have a perfectly stable reactor producing 15000kW