How To Sync the Carburetors on a Yamaha Banshee

[@ARIASPHIL123]

Thanks to video I was to be able to adjusted my carb now running a lot better

[@vince5946]

Great vid. Another easy trick is to back out the idle adjusting screws and use the shank of a drill bit as a feeler gauge (usually around .040"+-) and adjust the cables to suit, it gives a real good starting point

[@caseyayaan9294]

pro trick: you can watch movies at Kaldrostream. Been using them for watching lots of of movies recently.

[@devonlewis8491]

@Casey Ayaan Definitely, have been using kaldroStream for months myself :)

[@muggy4841]

Take that fuel filter off, as it’s a gravity fed system, you don’t know if it’s restricting flow over time causing a lean condition, unless you constantly do plug chops. It already has a screen in the tank for that purpose.

[@banshee100]

You guys need a carb syn tool that way it's pulling the same amount of air for sure

[@jamesdavid5997]

Thank you very much for making these vids!!!!!!! I have and still do order parts from RMATV! Awesome..

[@Dave-ob5sk]

Great video! Do these procedures work with Raptor 660? It would be awesome if you could make a video about synchronizing/tuning carbs for a raptor 660. Your videos always have plenty of helpful information and tips. Keep up the great work!

[@muggy4841]

Dave 2001 ehm, I don’t think so. The 660 carbs look like butterfly carbs whereas the banshee is a slide carb.

[@Cabral7o2]

Want to get lectron carbs for stock set up what some other components I need for it

[@puch7261]

What size jets are you using with the fmf pipe system?

[@quintinfarmer7848]

Is there a reason you start with the right instead of the left?

[@ikewynn4186]

Need a set of Mikuni carburetors for my Yamaha Banshee the ones that I brought does not say Mikuni it does not want to stay running it doesn't want to stay running I have to spray starting fluid then it starts up I can wrap it up but it cuts off why is that?

[@topnotchbarbertv9523]

Is the white banshee the one with the QA topend kit?

[@rmatvmc]

Yes it is.

[@SheeS_mine]

does the main jet always have to be the same?

[@Alex-ux8ni]

Main jet has to be the same on both carbs

[@johntripp1825]

Yeah I just bought a banshee it’s got aftermarket pipes ,t-5s Aftermarket carbs the force I can’t get this thing run right it’s Has no lo end somebody please help me jet This thing what jets to start with

[@Studio_Earth]

@John Tripp depends on altitude. 290 to 310 mains and 27.5 to 30 pilots. needles set in the middle position and air screws roughly 2 turns out.

[@BansheeBlack]

Where are you located

[@rmatvmc]

We are located in Payson, Utah.

[@coffeecandan44]

My carbs are different idk

[@thomasrenfrow609]

Nah, nah, best way is to get rid of Grandma's grocery store cart(your Ban-She) and buy a dirtbike! BRAAP BITCHES!!!!