How to Take Off The L2 R2 Triggers from PS5 BDM-040 Controller - eXtremeRate

[@ABoogiexNoHoodie]

Thank you for finally posting this!! I have two bdm 040 controllers and could not for the life of me figure this out. Now I can finish customizing the controllers for my nephews

[@ExtremeRate]

Glad I could help!

[@george420]

Glad to have found this video. I couldn't find any others for this model on triggers. After doing this I've discovered that tiny is so small I could only barely see it. Luckily I have a few of those cell phone sim card slot tools as shown in video. I just started poking in that area and found it that way. Oh, and that battery tray must come out to get lined up with the pin hole.

[@peter98000]

When will you release a hair trigger kit for the bdm 040

[@ExtremeRate]

We are working on it, please stay tuned

[@slugzz-]

@@ExtremeRate🙏

[@marrimekuria5079]

What month is it releasing?

[@HexXxNation]

Word im waiting for this 2

[@tiagosemedo884]

@@ExtremeRate realistically how long?

[@GOON20908]

People have been wanting for over a month now when will u have clicky triggers kits for bdm-40

[@michaelbetancourt9699]

Everything worked out thank you 💪🏼

[@filipkosinski726]

You should make a clicky kit for bdm 040 ps5 kontroller

[@ExtremeRate]

We are working on it, please stay tuned

[@filipkosinski726]

When do you think it might go on sale?

[@TheSANINNE]

Yes make one please

[@vaporx8713]

Any update on 040, clickey triggers?

[@GOON20908]

Moving on a slow speed to give there community what it needs

[@ryguy4521]

My controller doesn’t have a hole near the spring, is there a different way?

[@FBT_Crimson]

Real

[@jackbray5086]

Mine two, have you figured it out yet, I can’t seem to get it off … It’s like the actual plastic mould on the internal part of the controller is blocking the pin from coming out

[@alexthemangames4675]

I’m thinking that older models don’t have this accessibility. I am also facing this issue with gen 1 controller

[@Smuss73]

Yea same n this doesn't help

[@MelodyFoster-fe7nl]

I figured it out!! if you take the 4 screws that are on the side thats popped, you can pop that whole black section thats covering the rod completely off, just watch out theres a gear trigger that can fall out and was a pain for me to get back in there but it gave me access to that rod and i could pull it with standard plyers and then everything else was just as described

[@knightmareKnight1]

Do you know approximately how long till the new mouse click and triggers come out for bdm-040? 😮

[@GOON20908]

Seen like there in no rush

[@Lukr-nd3zv]

How do you know what kind of controller you have?

[@mrbrocephus3849]

Need to do an update on this vid due to the different models the ps5 now has. I have bought a controller. The triggers don’t have a metal bar. It’s now plastic and there is a cog ⚙️ wheel attached as one part of the trigger now.

[@michaelScott-h8o]

How do I install the BDM-040 clicky hair trigger on this controller?

[@ExtremeRate]

The triggers structure of the 040 is different from the 030, so it's not compatible. We are working on the 040 clicky triggers, please stay tuned

[@GOON20908]

And there moving extremely slow on making bdm-40 parts

[@Blyatarina]

​@@GOON20908 cry more. They're*

[@stanleefyah5534]

We need clicky buttons and triggers for BDM-040 please!!

[@YoutubeAccount-qq7zj]

Aahh was hoping for a sneaky quick adjustment to fit the 030 clicky triggers on the 040.

[@ExtremeRate]

It's total different on the triggers, we are working on it

[@PixelatedDoesGaming]

@@ExtremeRatehey i ordered 2 switch pro controller shells, one white zelda and one pink. The last update was on Dec. 6 so im asking can u give an update?

[@suhtangwong]

%99 custom triggers are for the 1st model only 🤦🏿‍♂️

[@PixelatedDoesGaming]

hey i just contacted them but all they sent is a link. The link redirects me to a tracker thing and the last update was still on dec 6. Im getting worried that it might not make the holidays. I ordered it way back in November 27 in my timezone. Please give an update soon.

[@PixelatedDoesGaming]

Nvm its fine now its at the post office

[@strawberryfanta9214]

can I install bdm 020 clicky triggers on bdm 040 controller

[@owenanslow5642]

Any idea when the click triggers / buttons are coming out for BDM-040. I purchased multiple controllers to customise and now I’m stuck. Or is there a work around using 030 kits. Thank you

[@Inhabitant1000]

I lost the spring on my BDM 040, and I can't find a replacement anywhere. Any help?

[@Anonym42069]

Ebay

[@prodestantjesus4351]

Where do i get triggers for the Bdm m 40?

[@ExtremeRate]

The buttons of 040 are the same as 030

[@suhtangwong]

You skipped this most important parts, the horrendous springs 🤦🏿‍♂️

[@omargaming142]

hey extremerate, i know this question isn’t about this vid but i’m planning to buy the mouse click triggers and the four back paddles so which one should i install into the controller first

[@ExtremeRate]

Clicky trigger first

[@omargaming142]

@@ExtremeRate thanks, happy holidays

[@jayjoemat]

No chance to find the hole

[@Zv3k420]

Tiny hole is so nothing hard to find still finding

[@ricky096]

Is there a bdm 040 click trigger?

[@ExtremeRate]

Please stay tuned!

[@PixelatedDoesGaming]

hey i ordered 2 switch pro controller shells, one white zelda and one pink. The last update was on Dec. 6 so im asking can u give an update?

[@ExtremeRate]

Hi, please contact our customer service info(@)extremerate.com with your order number, our cs team will check for you

[@PixelatedDoesGaming]

Thanks! I will check in a bit.

[@PixelatedDoesGaming]

@@ExtremeRatehey i just contacted them but all they sent is a link. The link redirects me to a tracker thing and the last update was still on dec 6. Im getting worried that it might not make the holidays. I ordered it way back in November 27 in my timezone. Please give an update soon.

[@brendoneggers5673]

Would you guys do the crystal clear shells for dualsense? Crystal clear black would be perfect

[@ExtremeRate]

Thanks for your suggestion, we will make them later.

[@KARB_3]

يعطيك العافيه يارب 💙

[@RPM_015]

When I put my triggers back in they’re just stuck I can’t click them or something

[@nouvoslatt1747]

How do you remake the spring ?

[@MikeAruba69]

No way! I didn't know Sony made a revised Dualsense model where it's easier to remove the L2/R2 buttons? That's one of the things that I found tedious. 🤯

[@ExtremeRate]

lol

[@juliuscarter2687]

Do you guys have soldering ribbon cables for the newer model of ps5 controller

[@ExtremeRate]

Which cables exactly?

[@princeyyz]

Can you guys make a Cliky button kit for the dual sense edge please

[@ExtremeRate]

We are working on it, please stay tuned

[@tendies9332]

@@ExtremeRate do you have any idea for when the clicky kit might come out. The trigger stops on the EDGE don’t feel nearly as good as the clicky triggers you guys provide

[@GOON20908]

There seem slow at doing anything

[@mundot100]

Does anyone have any ideas why my l1 l2 triggers are not working but the r1 and r2 are working fine on the bdm 040 model?

[@SpeedyNeptuneFN]

Hi ExtremeRatem, I recently purchased your 4 paddle remap kit and it is excellent. I also purchased and set up the clicky hair triggers for my BDM 020 controller, the problem is though that there isn’t a clicky noise when I pull the triggers, is this normal?

[@ExtremeRate]

Which version of the clicky triggers you have? The micro switch version will more clicky just like the mouse click, and the tact switch version is more like you clicky the share / option buttons

[@maddenboss4life]

My rod is stuck and wont come out, any help

[@zionvazquez4012]

Hey extremerate I’m a big fan I watch literally all your videos! For years now I’ve been using a lot of your product and over the years I’ve collected peace’s and screw up projects figuring out what I can do with them is there a way we can work something out is the work place I can send this big box of peace’s to?

[@ExtremeRate]

Hi could you please contact me via email ray(at)extremerate.com?

[@UrkaHighlight]

hi extremerate BDM040 have clicky R1 R2 L1 L2 switch ???

[@shfd3832]

What's the difference between bdm 030 vs bdm040? In terms of changes and quality?

[@ExtremeRate]

The main different is the triggers part structure, maybe it's the cost-down reason (easier the assemble process)

[@shfd3832]

@@ExtremeRate so trigger will be less in quality comparing to previous bdm 030? What do u think?

[@nate7876]

Hey ExtremeRate I wanted to know if I am able to put all the kits for the ps5 controller in the same one and if I am able to is there an order I should install them in?

[@Anonym42069]

Same brother …

[@ExtremeRate]

Clicky first, and then LED kit, and then the back buttons kit

[@Anonym42069]

@@ExtremeRate I got it works perf but in my set I was missing the double-sided adhesive tape on the flex cable

[@nofox777]

My springs or button come out or something . R2 not registering

[@austinbaker5762]

You fix it?

[@SD-hr9is]

My triggers don’t trigger

[@RPM_015]

When I put my triggers back in they’re just stuck I can’t click them or something