How to tear down an engine - Big Block Chevy - My first time.

Complete Disassembly of my LS5 454 Big Block Chevy.
Follow on Instagram:
/ ss454_ls6
If you would like to support the channel:
www.paypal.me/SS454LS6
/ ss454ls6
Amazon Affiliate Links:
FiTech 30012 1200 hp Go-EFI 8: amzn.to/2nJrvE7
Edelbrock Performer RPM Air-Gap 7561: amzn.to/3rZF9ke
Music By: "After The Fall"
Track Name: "Midnight Frost"
Published by: Chill Out Records
- Source: goo.gl/fh3rEJ
Official After The Fall KZbin Channel Below
/ @cloudunder
License: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
Full license here: creativecommons.org/licenses

[@benhoke6330]

There is alot of power to be made with those heads with some work.get your cyl pressure up around 185-200lbs and get a cam that makes peak power at 6,000 rpm.glad it was all in good shape!

[@antilaw9911]

Something to mention for all... when an engine is cold it doesn't matter any order to remove head bolts. That only matters when engine still hot do to expansion/cooling rate. Have a good ya all!

[@derekmelyndadeckens2982]

This is a great video, like just about all of them I've seen, but maybe I missed the part where you identified the heads. What heads are you running, did i hear stock LS5 engine?

[@pockets5628]

Your plugs were too cold for 9.5:1. The ground strap doesn’t tell heat range. How many threads are colored does. You should have2-3 threads colored. Overall the plugs show rich and some oil ingestion. Have a look at the GM performance valley pan, like the crate engines come with. Yes that timing chain has a lot of wear.

[@twgarage-terrywatson1672]

Looks good. 👍

[@onsturn]

What are your plans for the motor? My 427 is currently being rebuilt for my 69 Vette. I put in a stroker kit at 70 over it will be a 498. Looking forward to the dyno numbers.

[@SS454LS6]

Mine will stay a 4 inch stroke, bored .060 over.

[@matzrat5006]

always run steel mounts all around or poly all around or rubber, dont mix them

[@musclebone7875]

I ran a rubber mount and a steal mount on my old 402 bbc with no problem.

[@matzrat5006]

@@musclebone7875 got lucky, i run steel all around, so far 28 years later, no cracked trans or broken mounts.

[@musclebone7875]

@@matzrat5006 lol I guess I did. I run steal mounts now. My 496 makes alot of torque 😆

[@matzrat5006]

@@musclebone7875 i have a 496 , long rod , with 840 heads , flat top pistons. makes life fun.Changing the Heads to AFR Magnums , lighten up the front end a bit.

[@musclebone7875]

@@matzrat5006 840 are rectangular ports heads right? I'm running the 088 rectangular port heads with a flat top piston as well. What AFR heads are you looking at?

[@MrDavidfig]

Are u running the procar seats in your chevelle is did they bolt right up

[@SS454LS6]

Yes Procar seats. Check out the install video: kzbin.info/www/bejne/fIfCo4udftRqotU

[@georgeferreira2090]

Go roller cam