How To Test All Electronic Components with Multimeter | Resistor Capacitor Diode LED Transistor Fuse

In this video, I have shown How to test all the basic electronics components like resistor, capacitor, diode, LED, transistor, fuse with a multimeter.
As this is complete multimeter Tutorial for testing all basic electronics components you can click on the following time stamps to skip any portion of the video.
00:27 How to test with Multimeter
01:26 How to measure battery Voltage
02:06 How to measure Resistance accurately
05:33 How to measure Capacitance
08:51 How to test Diode
10:53 How to check LED
12:03 How to check the transistor NPN or PNP
14:40 How to check fuse, continuity tester
After watching this tutorial video, you can test all the electronics components with a digital multimeter. During measurement, I have also shared some tips to get the accurate measurement. This video will definitely help you to understand all the features of the multimeter and how to operate a multimeter.
If you have enjoyed the video please hit the like button and share it with your friends. For more such videos don't forget to SUBSCRIBE our channel and please do share your feedback in comment sections. Thank you for your Support.
Find us on Facebook: / techstudycell
Other useful videos:
How to Test Capacitors with and without Multimeter
• How to Test Capacitors...
How to Test MOSFET transistor using Multimeter
• How to Test MOSFET tra...
How to make Basic relay circuit and How a relay works
• How to use a Relay in ...
How to make 5 volt DC power supply from AC using 7805 regulator
• How to make 5 volt pow...
LED Basics - Polarity, Forward voltage & Current rating
• LED Basics - Polarity,...
Voltage Regulator ic 78XX Tutorial with Practical Experiments
• Voltage Regulator ic 7...

[@CornellEvans1]

This is a very clear video with a good explanation and details. As a beginner, I understood everything, and from now on will be confident in taking measurements. Than you!

[@aliahmadlou948]

This video training on testing the basic electric component was so helpful. I learned a lot of good tricks on how to test the components including how to hold a resistor correctly when testing which is something never taught in any academic books. Thank you so much. God Bless you.

[@TechStudyCell]

Thanks for your feedback...

[@akimkwaje5277]

It was wonderful

[@pray2002]

Thank you for your sharing. ❤ They're so valuable lessons for me to start repairing bad circuit boards.

[@myrddraal999]

Another wonderful video. Thank you so much for taking the time to make your videos.

[@TechStudyCell]

You are welcome...

[@abushabibalbalushi5864]

Thank you for sharing it with us and, it was load and clear.

[@TechStudyCell]

Thanks for the feedback

[@ifubaraboyerowland8490]

Good instructor thank you so much

[@user-db1il4rx3e]

Helpful!

[@nedunchezhiapandiannarayan7933]

This is a very good video for a beginner. Thanks a lot.

[@muhamadabia418]

Education is o

[@adamdavies6248]

Thank you! This was so clear and helpful, really helped me out, many thanks! :)

[@TechStudyCell]

You're very welcome!

[@yashgupta1633]

Thank you bro

[@sergiopires5724]

u r explanations is beautiful .really i appreciate u r explanations .thank u so much.god bless u

[@TechStudyCell]

You are welcome.

[@erikcire7809]

This was the course I needed to do all the testing of my power supply TV, thanks very useful !

[@TechStudyCell]

You are welcome

[@loganathanvb6834]

Clear explanation bro Thank you very much 😊

[@TechStudyCell]

Thanks for the feedback 😊

[@DanielChiemerieIbe-yz2xd]

Wonderfully explained. Thank you sir. I learnt alot

[@DEmma1972]

Learned so much in so little time. Great vid

[@TechStudyCell]

Thanks for the feedback 😊

[@DEmma1972]

No, thank YOU. Because of your vid I am buying a multimeter tomorrow and hopefully be able to fix my hoverboard

[@salimrajab7668]

This is best sir, am really grateful

[@AKASH-oz5yc]

Thanks for sharing knowledge Generally practical perpose student watch this video And also this video is helpfull to performing practicals

[@TechStudyCell]

Thanks for your feedback 😊

[@barichoudhury5591]

Very good demonstration. Thanks

[@TechStudyCell]

You are welcome 😊

[@felixkwamewiafeakenten-ci6yu]

Thank you for using English for our understanding 🎉

[@lufunolufuno4900]

That was very helpful

[@shabirmir9597]

Good demonstration.

[@oleezone99]

Thanks a lot

[@missionuluna5837]

Thanks for the video 👍🙏💯🇵🇬

[@expertofeducation1521]

Thank you so much sir u so versatile teacher. Love u sir

[@TechStudyCell]

You are welcome..👍

[@taz-on-the-looseyusef5526]

wonderful explanation, u are very good at explaining things, i liked this , greetings from Botswana

[@TechStudyCell]

Thanks for the feedback 😊.

[@rosevineargallon9351]

Through this video i gained knowledge, thanks,

[@TechStudyCell]

You are welcome

[@aboothahiru6354]

Simple explanation ...Good video

[@TechStudyCell]

Thanks for the feedback...

[@shpejtimberisha3024]

Thanks for ur tutorial clear and simple👍

[@TechStudyCell]

You are welcome

[@ssennonojohnmary4406]

Interesting ❤❤❤❤

[@user-it4mc7kh6g]

Very good

[@bornodadventureboy2666]

Very very tq..it help us our presentation of our college

[@rabbiisaac5427]

Good job!

[@electronic7979]

Excellent

[@ninaandsakura]

Helpful! Thanks

[@TechStudyCell]

Welcome

[@idongesithanson7162]

Great and amazing

[@dinkisaguluma6851]

It's good teaching. Thanks..

[@TechStudyCell]

Welcome

[@nuwanasanga7222]

it was very helpful. thank you sir..

[@TechStudyCell]

You are welcome

[@ramajeyamram4616]

thank you so much sir....

[@TechStudyCell]

you are welcome...

[@gentelmanjunkie542]

excellent

[@user-hb8lx4ig3i]

Thanks

[@aditinagulkar6361]

I am first years electronic diploma student. This information is much applicable for my electronics practical.Thank you sir.🌞

[@TechStudyCell]

All the best

[@kona702]

Wonderful video!

[@TechStudyCell]

Thanks

[@quintoflyer]

thanks

[@robinwells8879]

Very useful and much appreciated Sir. The diode and transistor functionality was a blind spot for me. I shall have to store the video though because my memory chip ain’t what it was! I think that I am quantum tunnelled out😂

[@shsftech3792]

Nice this video is very helpful..Thank you!

[@TechStudyCell]

You are welcome

[@SANKOHMOHAMED-my6xb]

Very much educative video for electrical Engineering student

[@TechStudyCell]

Thanks

[@nalasios5063]

Very nice.... tHanksss alot

[@TechStudyCell]

You are welcome 😊

[@theaffiliate7809]

Nice..

[@shivamraaz7398]

Thanks please make more videos

[@addictionforphysics8509]

Thanks sir for a good knowledge

[@TechStudyCell]

You are welcome

[@chennasrihari8868]

Good sir explain all components

[@TechStudyCell]

Thanks for the feedback...

[@billypastor6667]

Thaks sir for ur best tuttorial .......

[@TechStudyCell]

Welcome

[@gangareddykore6363]

Thanks bro you make more

[@TechStudyCell]

Thanks...

[@johnarsenic]

Thank You, Good video well explained

[@TechStudyCell]

Glad it was helpful!

[@shis10]

Awsome video Bhai

[@TechStudyCell]

Thanks

[@jeahmaeramirez5382]

Thanks for this video BIT-CT 2I

[@user-ox1yy2hx9v]

I get ur vidoo very helpfull

[@gezahegnassefa3801]

it is good Keep up it

[@sakhadarpan]

VERY GOOD Dr Saroj khan

[@TechStudyCell]

Thanks

[@wanjarishashikant6479]

Very informative video.. great sir

[@TechStudyCell]

Glad it helped

[@joemason9187]

Good learning vid

[@TechStudyCell]

Thanks

[@rahulsriram7179]

Good

[@sanjayasaliya1102]

Thanks sir

[@TechStudyCell]

You are welcome.

[@irandoosti]

Thank you so much :)

[@TechStudyCell]

Welcome

[@fridaymbossoh3109]

This video is helpful I learned Alot from the video

[@TechStudyCell]

Thanks

[@rajenderraju7340]

Your given me information we will thanks

[@TechStudyCell]

You are welcome

[@chandanigauravpatel1774]

Superb

[@TechStudyCell]

Thanks

[@toptvnxn]

Your video is very useful, I want to share with everyone in my country by adding Vietnamese subtitles

[@lawrencecarver4233]

Hello I'm in the USA Oregon. I want to say that the vietnamese people are so caring an Before I met people from Vietnam I was brain washed by our news about the war. Our government is the evil one's. Wish I could just your country. I love your style of food.

[@arnabchowhan3488]

really good u deserve some more likes

[@TechStudyCell]

Thanks for the feedback...

[@aslamparvej3]

Nice video and also helpfull

[@TechStudyCell]

Thanks..

[@train.sleep.eat.repeat5278]

Very good dude

[@TechStudyCell]

Thanks

[@MEKAVELLI77]

Thank u

[@TechStudyCell]

Welcome

[@manishlodhi7238]

👌

[@FiXiT5313]

Helpful video. Keep it up!! SUBSCRIBED!!

[@TechStudyCell]

Thank you

[@FiXiT5313]

@@TechStudyCell Please make a video testing different types of transistor and mosfet too.

[@TechStudyCell]

Already made videos on MOSFETs and BJT testing

[@ravindraadapa2952]

good one

[@TechStudyCell]

Thanks

[@rammohanschannel649]

Nice sir

[@TechStudyCell]

Thanks and welcome

[@BBRR442]

Thank you very helpful! Can you also measure relays and transformers?

[@TechStudyCell]

You can test the coil only with continuity

[@mungelectronics7601]

You guide the inspection of electronic components very meticulously

[@stephenaquila7510]

Sir can i contact any of you?

[@mungelectronics7601]

@@stephenaquila7510 Yes I come from Vietnam. I am also an electrician

[@stephenaquila7510]

Thanks, glad meeting you sir!,am from African

[@stephenaquila7510]

I repairs refrigerators & Air conditions... And most of the new model fridges comes with panels of kinds

[@bigmedge]

This was excellent, thank you so much sir !!! Just 1 humble request : would you be able to kindly make a video showing how to test an op amp with a multimeter ? Thanks again !

[@TechStudyCell]

Ok. Thanks.

[@bigmedge]

@@TechStudyCell sorry to bother you , so do you have a chance soon to make a video about how to test an op amp with a multimeter ?

[@ciararespect4296]

@@bigmedge and a digital piano please

[@rishabhsinha4590]

Nice video

[@TechStudyCell]

Thanks

[@manikandanvaiyapuri4624]

Nice

[@TechStudyCell]

thanks

[@nipunsankalpa9262]

Great job bro keep it up

[@TechStudyCell]

Thanks

[@eddiemurigi4581]

It's such an interesting videos so far, great people mahn

[@TechStudyCell]

Thanks

[@fredsk1]

For those wondering what model of multimeter being used: Chung Instrument Electronics model CIE 123 www.cie.com.tw/pro_multimeter_120ser.htm

[@caydaruusmuxumed218]

ok thanks

[@TechStudyCell]

Welcome

[@frankdavidson9675]

just a minor tip when testing with your meter and you get an odd reading diff #s hastily twist the selector knob back and forth what this does is clean the contacts in a circle for diff functions in side the meter this works good with analog or digital meters

[@lmcriminals]

Does this work for electronics still in circuit?

[@kirubababu7127]

In which mode should be set 8n multimeter before checking transistor?

[@yohanisseifu8103]

Please show us cpt on its bored with circuit flow and voltage.so that how we measure and figure out the failure from the bored..

[@kaswalulaambrose9991]

Beutiful

[@TechStudyCell]

Thanks

[@shivamraaz7398]

Please make a video on relay

[@TechStudyCell]

I have already made a video: How to use a Relay in Circuit and How a relay works kzbin.info/www/bejne/mZ25kHuqhsqhhc0

[@daniellopez7819]

What multimeter model you're using

[@younggemmycollector]

What if your testing the components on a circuit board and is it supposed to be the same readings as in the video? Because when I go to test my transistors by putting the positive on one side and the negative on the other side they all have a reading and in the video it is supposed to be 1. If it’s good. And I know for sure all these transistors aren’t bad.

[@Ramuking18]

,👍👍

[@sarathchandragunti6756]

Pleaae send model of Multimeter

[@BonyRespectclips]

what is the com represent in the multimeter

[@ericpadilla4999]

How Manny symbols are for the diode mode sir ?

[@sarathchandragunti6756]

Can i know name of the multimeter

[@ourlifestyle7339]

What type multimeter that you used?

[@pranjay_t]

Correct me if I'm ::--The battery's observed voltage is 9 Then how can it shows 9.4 as measured value.Measured value should be smaller or equal to Observed Voltage not more than that.