How To Test and Replace the Neutral Safety Swtich / Inhibitor Switch P0705

[@edyoung6756]

Finally! Someone made a video that's instructional, comprehensible and actually speaks English. Thank you! Thank you! A thousand times THANK YOU! You just gained a subscriber who will tell as many people as possible about your channel. My neutral safety switch on my 2019 Nissan Versa (I'm told) is bad and needs replaced. I'm like most, not having the funds to pay a mechanic even though my vehicle is still under warranty from Nissan. And the mechanics at CarMax, who say my service agreement is valid, refuse to fix it because their insane logic and deceptive loopholes require ME to take it to a dealership who automatically charges $200.00 + to diagnose the problem AFTER it has already been diagnosed. I'm going to "attempt" fixing the issue as I've successfully done before. And if successful, it would be great to tell others how one can do so purchasing a brand new Neutral Safety Switch online for less than $20.00 from a company in China which fits my particular vehicle. Again, Thank you so much. Keep up the GREAT WORK AND AWESOME CHANNEL.

[@aaronsuperstar2]

can't thank you enough description just about Safety Swtich cover every inch and help me to diagnose and to find out if I have any problem there you are absolutely appreciate it and I thank you very much for taking the time and being so kind to explain Safety Swtich everything thank you

[@CarsNToys]

Thank you. Glad to help.

[@jaywholoveseveryone1721]

Best video EVERRRRR! Thank you for explaining in detail. I appreciate you & this video. I definitely needed to subscribe.

[@ProudJake]

Just thought these video's should be linked. Thank you by the way for your help! Nissan / Infiniti Neutral Safety Switch Replacement / Inhibitor Switch Replacement P0705

[@CarsNToys]

Proud Jake Glad to help man.

[@matthewkile8]

What an excellent and informative video. Thank you sir.

[@dfields9511]

Excellent video, might be having an issue with. 2001 maxima Had to put P ->N ->P. Then it started. Will keep eye on it . It might of gotten out of adjustment after 20 years. My son mostly drives the car now. And I think this issue has happened twice in 16 months. But also starter went and I replaced starter it for him. Part was free under warranty. I am sure it was the starter because I could hear it try to start but starter didn’t turn over . After a few taps on solenoid it started. Possible the cable got stretched or got miss alignment . Hopefully it isn’t the neutral safety switch sensor. But if it is part at rock auto is like $20-30, Autozone : 40-50, Dealer :80-90 Past 2-3 years electrical has been giving me issues Battery Both headlights bulbs not at same time Break light switch Blower motor & resistor Window motor Starter #4 coil Speed sensor Possibly TCC solenoid (p0744)

[@michaelthornton8683]

Very helpful! Thank you!!!

[@alanb287]

Thank you, this is a great video. Very clearly shown and explained.

[@CarsNToys]

Glad to help.

[@run2thefight]

I bought a 92 Nissan pathfinder and I put it in neutral to transport it and I started it once but then it would not start again to save my life and I could not figure it out and even couldn’t get so called mechanics to diagnose and after a process of eliminating other causes why it wouldn’t turn over and it boiled down to the inhibitor switch being in the wrong position due to me manually setting the shifter into neutral and took it out of alignment and thought it was in gear. Anyway thanks for all the great information. Liked Subbed

[@abelh1210]

You realy help me on my car problem, and you explain so good, thank u blessing

[@garyroberts3104]

abh1210 how to test neatural safety switch on

[@ashleymorgan2713]

You explain things very well, thank you.

[@CarsNToys]

Glad to help.

[@edwardharvey5839]

Thank you so much for doing this video. What an eye opener!

[@CarsNToys]

Glad to help.

[@illest_centaur_ever1387]

@@CarsNToys Dodge Journey starts in neutral when it doesn’t wanna start in park

[@Pfsif]

You explain things very well!

[@joseotiz6883]

Tks helped me

[@anthonymarez7188]

I don't know what people are saying or meaning you clearly stated that this was a Maxima

[@aralga]

Anthony Marez they want to know the type of vehicle it is so they don't have to watch it if the vehicle doesn't match theirs.

[@gestr14163]

I Just Finished watching you video. Thanks You Helped me out man. A+++++

[@jorgevasquez-lz4be]

Good video thank you!

[@rathman4601]

very informative! great job. You have the most informative video on this topic so far. I haven't been able to find much information for my 2006 Toyota Sequoia Limited AWD. It only starts in neutral. The shifter is very tight when shifting from park to neutral. Would you have any advice on my issue?

[@CarsNToys]

Check the cable that leads from the shifter to the transmission assembly. Maybe kinked somewhere.

[@rathman4601]

@@CarsNToys Should the position lever that's connected to the cable be loose enough to be able to move by hand or tight? If it's tight, then should I assume it's an internal issue?

[@amazingvideosjilo9509]

Hi, am a bit confuse for the last part when you said that you need adjust alignment at neutral shifter taking the reference hold unscrew the control box and do alignment with the strait Allen key to this will allow to put everything in place. 1-you tied everything back but the cable shifter is in park and the adjustment alignment in neutral 2- Does this stay in neutral with alignment and shifter stay at Parking? 3- When you need to change parking to neutral should works? this is confusin for me.

[@taejun9017]

Are Neutral Safety Switch and Transmission Range Sensor the same thing? Thank you

[@taejun9017]

Kevin Mcneil ??

[@ronhat-nx6yq]

Some information that may save someone some money and trouble. The neutral safety switch will cause many more transmission problems than just the no start in park. My towncar would intermittently jump into a lower gear when driving but just for a second. It can also cause a vehicle to not go into certain gears. If you take a neutral safety switch apart, it has many contacts inside it and many wires going to it.

[@zut25]

very useful video. Is there a way this inhibitor switch may have been damaged by accidentally turning the engine off with the car on D?

[@CarsNToys]

Alexis Zaragoza Doubtful. You have something else going on. Any trouble codes?

[@simbad909]

Good info...good clues

[@coldxzeroyt]

Bro are you still here i have issue with citroen 2007 1.6l dunno how ro adjustment inhibitor switch also cant remove it because screw damaged my can unable to start when i turn key on its apoeare 2 dots on screen no letters appears p or r or n or d

[@bongstv1279]

Hey mate, hope you could answer. I have continuity in Park and the rest but the only no continuity is the Neutral position. Do you think that’s the reason I couldn’t start the car? By the way. What is the 2 terminal plug you had tested?

[@jessegarcia123]

Awesome video bro I have his problem will fix it soon thanks!

[@CarsNToys]

+Jessesweet 1 Glad to help!

[@avenger9652]

Thanks for sharing. I noticed moving the gear shifter only helps 25% in getting it started. If I rock the car back and forth in park, it starts 99% of the time. I will check to see if it is out of alignment. By chance, do you have the wiring diagram for a 1996 Nissan Altima so I can perform this test as well?

[@CarsNToys]

I can probably get it. Throw me a message via facebook if you still need it

[@Kingdomcomeglobalministry]

Great video thanks for the instruction. Very informative.

[@CarsNToys]

Thank you. Glad to help.

[@Radzaification]

Hey mate, long shot you're still watching the comments of old videos like this. But do you have the part number for the switch? Got a dead one I need to replace on a '97 Bluebird/Altima that looks identical. Cheers!

[@CarsNToys]

Gotcha. Try this site: www.partsnissan.com/

[@djpain204]

@@CarsNToys I just saw your video for the 1st time today... very informative and to the point. I have a 99 infiniti G20 automatic transmission with a bad switch, switch was replaced and now it only starts sometimes after a little back and forth with the shifter. Lately I cannot get the thing started no matter what, tried adjusting the switch, nothing works. Can you help me with any info you might have in regards to by-passing the switch altogether? What wires do I need to connect? Thanks in advance

[@Daltondoubledeuce]

Great video. Got a 2004 Forester XT super hard to shift into gear. Is it the cable itself or the inhibitor switch? I checked the shifter (automatic) and it seems clean. Thx

[@CarsNToys]

How did you check the shifter? Have you tried placing in gear from underneath the vehicle?

[@Daltondoubledeuce]

@@CarsNToys No not yet, I have a new inhibitor switch as well just in case cuz I was getting a code for that. Manual says to remove exhaust to get to it (cable and inhibitor), have to see if I can get to it without doing that cuz the exhaust is rusted together.

[@Mslady41]

What if you can't move the gear shift at all?

[@danielstadden1149]

Then you're shift out of luck!

[@danyelmontoya1059]

Look u Der the car, you cable could have came loose

[@joestratton3981]

Wish you had something on a late model Fiesta.

[@joelhundley7706]

Save money by checking for wire damage before you spend a hundred.Sometime wires get fried.Someone could also take a razor and cut it slightly so it fails but still has continuity.

[@JohnRoberts-m9x]

Nissan Xterra 2000 pnp works, truck starts in park and neutral also has reverse lights but I still get a code that tells me to replace Park neutral safety switch I'll try the continuity test. I need to smog but I believe it is a 02 sensor that is giving me a check engine light 😢😢.

[@Thatgurlnatnat]

very helpful thankyou

[@CarsNToys]

+Natalie Chapman Welcome

[@pamkaturi]

Is it the procedure the same for 03 passat? How do you a test the neutral switch out of the vehicle?

[@fahadmunawarkhan]

Thats exactly my car is going through right now, But i live in pakistan and not sure if they even have this to be replaced and even mechanic knows it or not ! wish me good luck for the morning.

[@CarsNToys]

Hope it works out!

[@snowfall1771]

Would this cause the key to not come out ?

[@Francine-furniture94]

What if I took it off and when I replacemed it I lost the park slot ? How to i go about getting it back do I move the shaft fwd with the arm cable on or back or I’m so confused

[@ptcride871]

Thank You for sharing this video! When I tested the continuity of the first two wires I didn't get continuity. What are the first two wires?

[@CarsNToys]

Those wires are used to detect when the vehicle is in Park and Neutral. Was the inhibitor switch in the park position when you tested for continuity? If the sensor is in the park position and you have no continuity, remove the shift cable from sensor and perform the test again. If you still don't have continuity it's a good indication the sensor is bad.

[@bena.3955]

I have a 2014 Nissan Versa SL and I just had the motor mounts replaced and it fixed the jerking problem when I used to switch from P to Reverse or neutral. But after fixing it I have a click sound when I switch to D or R, the click sound happens when I stop at a stop light and the engine light is now back on. I know it’s not transmission because I can drive it as fast as it will go. Is it the neutral switch?

[@juanes4992]

I'm having the same problem now, did you find the problem?

[@jhern5988]

my Mazda MPV 2001 starts in any position. I adjusted sensor, no resolution Will do the test next. I assumed the switch prevents cranking in gear. What you say, counselor.

[@CarsNToys]

+Jose Hernandez Chances are the sensor is no good if the vehicle starts in any gear.

[@kas7344]

Hey man, i got the same issue..my car is driving in 4 or 2 instead of D…..code P0705….i was told to change the neutral safety switch and another one says change the transmission range sensor circuit Im confused on which one to change or if its the same thing

[@ericthagr3at237]

I’ve seen it’s the same thing, not a 100% sure though as well

[@JohnRoberts-m9x]

They are both the same thing just different names 😊

[@ReviewdNew]

Can u answer question on 99 jeep grand cherokee laredo three pin nuetral safety switch. Like which factory wires go to the new pigtail connector

[@TheWiseZenShaman]

Hi, watched the video, and Im curious if you think this would fix my problem 2001 Nissan Pathfinder LE, all gears work, but when in Reverse, it sounds and behaves like Neutral. Fluids are all okay, no accidents or anything like that. Parked the car, next day, no Reverse. Could this video help me fix this?

[@TheWiseZenShaman]

CarsNToys So long story short, its a tranny rebuild? Whats that about 500-1000? If im "lucky" *looking at you God* it would be the gear lever cable? Is that the one in this video?

[@TheWiseZenShaman]

CarsNToys Are all rebuilds the same in expenses? What if its a simple problem? Thanks I'll look for free estimates! I appreciate that. And can you explain what the gear lever that youre talking about is I know youre busy but just enough so I can go research it please :)

[@CarsNToys]

TheWiseZenShaman It's the most complex system in your car so it's always expensive. But again, if you're lucky it may be a simple fix such as a worn cable running from the gear lever to the tranny. Easiest way to find it is while the truck is off, crawl underneath the tranny and have someone move the gear lever from park to drive. You should see and hear clicking noises. Just follow the cable and make sure it's on tightly and that every gear engages.

[@Filmaker25]

I have wondered does this effect the parking pawl at all?

[@eastpaloaltosfinest]

I own a 2012 focus. And i when i put my car on drive it acts as if its on neutral, is this the same problem? It also does this like weird movement when it revs over 3k rpm. How much is it to fix this?

[@Muilisxx]

My switch looks very diff. I have a 99 chevy s10. I bought a new switch from partsgeek because sometimes when I push in the clutch pedal and turn the key nothing happens and somtimes it starts. Other times i have to either push it down a few times b4 it will start or sometimes I really have to give the pedal a good push. I have reason to believe my switch is failing asdon't think it's tripping everytime I push the pedal down so for $25 bux it's worth s shot.

[@CarsNToys]

+Muilisx Yea, they're a bit different for manual cars. Sounds like you're on the right track

[@Muilisxx]

Indeed, I received the new switch 2 days ago, and dropped it off at the mechanic who already has the truck for other reasons so when I pick it up it should have the new switch installed and I will know right away if it was the switch or not because I'm going to push the clutch pedal down normally and if it starts then it was the switch for sure because the old switch never trips if I push it lightly.

[@JackTheAviator]

I hope you can answer. My car nissan murano has the same error code p0705 . It was hard shifting sticking in gear before going . After driving to my in laws for thanksgiving . It started but did not move forward or reverse. Gave it some gas and it started to go. Drove 5 miles and car did the same thing again . No forward movement after slowing down. pulled into side street by cruising and car died. Now it will not start. Would this be neutral safety switch ?

[@CarsNToys]

+small guy with small Afraid not. Any trouble codes?

[@JackTheAviator]

just p0705

[@CarsNToys]

+small guy with small What yr is your Murano?

[@isaavci3249]

is the car moves If this sensor is doesn't work?

[@stringermedia5875]

What vehicle is this?? Your listed under jeep?

[@CarsNToys]

'97 Maxima but the steps described apply to many vehicles. Cheers

[@egx161]

When you move the lever, how do you know if it’s in park or neutral, etc…? Thanks

[@Filling_tags]

My p0705 code on tundra says position range sensor A?

[@jamesgwilson1964]

hi i watched your video and it was helpful.. but i have a 2003 kia rio 5 door.rx-v.. this is the problem when it is cold it wont start all i get is a click click all lights are on fan, heat all power but wont turn over...when i park it on a hill it wont start... so i replaced the altenator.. starter, plugs and wires.. and crank shaft sensor.. it still doing the same thing... if i put it in neutral sometimes it will start... in park sometimes it will start.. some times i have to shift it back and forth from park to 2nd fast and hard then it will start.. soetimes all i have to do is let it warm up and it will start..i was told that maybe it's the neutral safety switch or maybe the park rang switch, or inter lock cable, or entire shift cable...i have spent so much money on this car it is sickening... i can't buy a new one this car has just about everything new on it now...i feel like im being shafted by men... can you help...no one has said anything about adjusting the transmission lever is this even possible on this car....this car is truly evil... any help will be appreciated.. thanks sandra

[@CarsNToys]

jamesgwilson1964 First thing that comes to mind is a weak battery. If the cold cranking amps on the battery isn't enough, you'll hear a clicking noise from the starter. (There isn't enough juice to turn the starter.) Next time it happens, try jumping the car. (If the clicking noise is coming from the starter, the neutral safety switch isn't the issue.) Also, is the check engine light on?

[@ManuelHeredia]

CarsNToys I have the same problem in a 95 Crown Victoria. I installed a new battery, but still doing the same thing. Could it be the neutral safety switch ? When the car reachs the normal temperature, it works fine. Thanks for your help.

[@CarsNToys]

It wouldn't be the safety switch if the vehicle is cranking or attempting to crank.

[@ManuelHeredia]

No crank. I have to conect a wire from the solenoid, place the key on ignition and then touch with the wire the positive lead of the battery so the car could start.

[@CarsNToys]

Gotcha. You have a wiring issue. There's a nice tool called power probe that can help find electrical breaks quickly.

[@michehampton9438]

i have a 2010 nissan sentra and with a cvt transmission. the code came up as p0705 and they said it may be the transmission range switch. is that the same as the switch stated in the video and for my car can i get to it myself?

[@CarsNToys]

It looks very similar to the switch shown in this video. If you have trouble finding the sensor I may be able to dig up some diagrams.

[@ivanchostefanovski2351]

J have toyita camry1992 2.2 automatic transmition. Work only reverse and work grate ,same time go in drive bur very hard.Is it podible to put by hand mehanical to drive positition.Also the light for drive on display on dashboard doesn't work.Can sambody tell that us possible mehanical to put in drive position and to ride.

[@xTylerRivas]

I am at your video because my cars clutch has to be stomped to start the car, and is this the fix?

[@CarsNToys]

+Tyler Rivas The neutral safety switch are for vehicles with an automatic tranny. They're called position switches on manual transmissions.

[@abrahambalmir1300]

i changed the nuetral safety switch the code still comes on? p0705 transmission range sensor the guy at auto zone said the code is not saying the switch is bad but it getting low voltage so is the connector to the switch bad? i installed a back up camera previous to this i dont know if that has anything to do with it but it does tap in to the reverse light

[@thomasharmon6444]

Your back up camera will have no effect on the power going to the neutral safety switch. Likely a bad or starting to go wire providing power to the neutral safety switch or one sending power back to the computer depending o9n which gear you have it in.. Take a volt meter and check for power at the electrical connection to the switch with the key on.

[@brittanylynn3711]

Is the p0707 code the same part??

[@TheConnorMclaughlin]

could I call you or direct message you. to pick your brain for like 5-10 mins. I'm getting p0705 error w my 2008 lancer. and I've already replaced the switch once. but it continues to periodically go into limp mode for no apparent reason. it's happened twice since I've replaced the switch. and I cannot figure out why. I keep getting the code p0705 and all the gears read out "r" for reverse, on my display. and when I shift into drive, it kind of jolts into gear. probably because its defaulting to 3rd gear, but still. I do not kno what to check for at this point. and am getting irritated. the one thing I think it might be is a short in the wires somewhere, no clue were. because the 2 times its happened, its been raining. but I hope u can help me and tell me what to check for.

[@terrencekepa5047]

Hi how or what setting would I be able to test wiring my multimeter doesn't have audio on it help would be much appreciated

[@joelr1965]

My auto 95 civic doesn't crank nor click when I try to turn it on. I'm able to start the car using a wire directly from the battery to the solenoid. Can it be a faulty safety switch? Please help. Thanks

[@CarsNToys]

Joel Rodas I'd start by testing the ignition in the steering wheel.

[@victoriachanel2493]

Would this work on a Lexus 470lx?

[@zachawesome10]

I have a 2003 dodge dakota, and it says it's in reverse and the reverse lights come on but the transmission is in park. I have to drop it down to neutral to start it. do you think it's this sensor, and will this test work on mine?

[@CarsNToys]

It certainly could be. You can do this test with your truck as well. The readings may be a bit different but the theory is there.

[@nikcvetkovski]

i tried your method but still no start so maybe i need a new sensor

[@therod21_]

Someone has a Volkswagen Passat that they are selling that needs this switch. They say that the car starts but does not move. Is this the issue?

[@freetob1]

No sounds like a tranny problem. The NSS Only controls your engine start and reverse lights.

[@dr.yousrysayedahmed7697]

My car cerato 2006 Shift position ( d,r,n,...) doesn't appear in digital LCD in dashboard Car is ok and no error codes detected by scan tool Is it a problem?

[@armandoburgos6712]

I have a 2001 Chevy Malibu v6 engine. Sometimes it starts in park but most of the time in neutral. When I try to start in park nothing happens no crank or sound. Starter and battery are fine. Any info would be appreciated thx

[@CarsNToys]

Armando Burgos Sounds like the symptom of a bad or going neutral position switch.

[@armandoburgos6712]

CarsNToys thanks for the info I'll update you thx

[@armandoburgos6712]

CarsNToys could it be a short that causes this as well? My headlights have a short and I payed 100$ for somebody to fix it and, they micky moused it.

[@CarsNToys]

Armando Burgos If the car always starts in neutral then I think it's the sensor going. You can also adjust the sensor. I'll try to upload a video for that this week.

[@armandoburgos6712]

CarsNToys it worked bro I appreciate your help. Thank you

[@SteelMckeelZ]

Can’t find any video on how to replace a 2012 Hyundai Sonata nss

[@abrahambalmir1300]

im doing this in a 02 maxima im having trouble aligning the pins near the cable how do it do it should i put rhe cable in nuetral first?

[@CarsNToys]

+abraham balmir Try to find something that will fit through the small hole on the shift cable opening and you'll be able to align the cable and sensor.

[@randyshaffer9113]

How you change N,safety switch inbox a 2002 Durango 4.7 v8

[@chelseaann2230]

Where is the neu tral safety switch located at on a 95. Camera

[@chineduokoro1610]

I have a mazda mpv 2001 model. But the problem am having ryt now is the cranks but it does not start. Please what should i do?

[@javluengo]

Hi. I'd really appreciate your help. My Ford Focus 2002 turns on the transmission light when it is in Park or Neutral. If I select any other shift, the light turns off. I replaced the TRS but the issue persists. The problem showed up time after I washed the motor of the car.

[@TTPSURVIVOR]

when replacing the neutral safety switch/transmission range sensor do you need to replace the connector.. I'm having an issue finding the connector... no body has it and ford discontinued it... what now?? help... how can I fix it? any pointers? I even called junkyard...

[@CarsNToys]

This harness connector was perfectly fine. Have you tried ebay?

[@joplinst1642]

I have a 2013 Elantra and it started clicking. I replaced the battery and still the same problem. Day later no click and my battery is dead because my parking lights stay on without my key even in the ignition. No one seems to carry the inhibitor part either or have the starter in stock. We need to call Hyundai and tell them we are all having the same issue.

[@71hemi440cuda]

This is a problem for me. My 93 318 Dakota won't crank when i turn the key but it will when i jump the starter solenoid with a screwdriver. I've replaced the starter, the ignition switch, all the fuses, adjusted the column rod, and everything thing i could think of. The nss is my last option really unless there could be something else i haven't thought of.

[@CarsNToys]

David Hollingshead Does the vehicle start if you place the tranny in neutral? If so, then you can try adjusting the nss or just replace it.

[@Rick-vf5ds]

+CarsNToys Thank you man!

[@71hemi440cuda]

+CarsNToys Not by key. But it starts no matter what gear jumping the solenoid. I had to chase my truck through my neighbor's yard once because i started it in drive

[@aubreyjohnson1751]

I want to replace my switch in my 2000 Cadi deville can I get some help

[@reeseything]

wow , thank u..

[@CarsNToys]

+Reeseythings Mommie Welcome

[@salvor1]

Why don't you say what kind of car your working on in the title or description????????

[@axtra92]

salvor1 Why?

[@rogerlocklear785]

I have an 02 Buick Rendezvous and it starts up no problem but as soon as I put it in gear it shuts off

[@davidtownsend2498]

2002 mercedes s430

[@carlrpyse1330]

4 closer results

[@carlrpyse1330]

I need to make an 3 wire neutral switch work on truck that came with a 5 wire plug system can anyone help PLEASE. Thanks. Carl can anybody help me figure out how to make a 3-wire switch neutral switch work on a truck that came with a FireWire plug-in kit please and thank you for your help

[@billbubba9505]

I have a 1996 chrysler intrepid...it is having starting problems...but does eventually start...however now the interior and headlights will not shut off at all...draining the battery...would anyone know the cause

[@johnniepayne9870]

My 2003 tribute will hesitate to move when in drive, but will move in reverse and will move when in low 1 and 2. What could be my problem

[@CarsNToys]

Johnnie Payne Unfortunately, the first thing that comes to mind is a tranny issue. Find a good tranny shop and ask for a free estimate.

[@rodger6940]

Does anyone know where is the neutral safety switch located on 00 biuck lesabre

[@JordalCake]

Anyone know where the reverse light switch is for a 1996 Nissan Cefiro A32

[@kimrichards6127]

I have a 2000 Nesson altumia I can't get it to start up it turns over but no start what's up with it

[@CarsNToys]

Kim Richards It wouldn't be the neutral safety switch if the car is cranking. You have to check for spark and fuel. I'd start by checking for spark. Visit your local auto part store and grab a spark tester. They're around $15. If every cylinder is getting spark, then you'll have to check for fuel. Take a look at this video regarding fuel. An easy point is the fuel filter line. kzbin.info/www/bejne/hWi9YXVudtCdd6M

[@ishtyaqali5164]

Awsome

[@CarsNToys]

Thank you.

[@josealfredovaldezgonzalez]

Que fallas provoca? Lo detecta el codigo mi altima 1999,pero no tiene ninguna falla

[@manloved]

can u help me I need to replace my neutral safety switch on vw Passat 2003 1.8 turbo

[@CarsNToys]

+ricardo sanchez Sorry, Ricardo. I don't have any VW material on my end.

[@raulvascan439]

hi i got P0706 in my car peugeot 607 2.2 2004 what is this of sombady help me tnx

[@harlieequinn3453]

Can you please help me find where the neutral safety switch is for a 95 subaru legacy lsi?

[@jaujar8581]

I have a 2017 outlander 4 cylinder Mitsubishi it will go into every gear but driving I have to hold this is the first that it has no I did take the negative off cuz I had to redo the gas lid take the negative off and reset it and I don't know if that's got anything to do with it or not does anybody know what may be going on with this vehicle to 2017 outlander four cylinder

[@elneneeserio]

So my car will not drive L or move forward park and reverse works

[@elneneeserio]

Wold this be the mpart to change

[@kimrichards6127]

Cou it be the neutral safety switch

[@chineduokoro1610]

Please i need a help my car cranks but does not start

[@raulpino6611]

Thanks for the video. I have this intermittent problem with no crank when in Park position. If I shake or hold the gear stick towards the steering wheel , the engines cranks and do start. I think I have to adjust as you did at the end of the video. Anybody done this on a MERCEDES VITO 2003, AUTOMATIC, PETROL ENGINE? any tip will be appreciated.

[@CarsNToys]

Sounds like it needs an adjustment. This vehicle was doing the exact same thing.

[@HellinBack]

I think this is my no start issue on my 2002 gt because i can start it via starter relay

[@KILLER-gq5yb]

Welcome Your help .bmw E39 530 into a mechanical and automatic reverse gear lights to lighten. Light module Which wire to plus or how many volts

[@ricardomendez8519]

si los camibios de un betlle entran bien menos la teversa se tiene que reparar la trsmision mod 2001

[@FLguy01]

Did anyone else notice the battery posts looks like they have a bunch of corrosion on them.

[@HankRogers-j5z]

5.7 hemi 1500 Ram

[@carolynwilson3883]

that battery looks like ass. tons of corrosion.

[@yukdirt07]

P.O.

[@HAMRADIOJOE4178]

ONLY U WOULD SAY THAT