Thank goodness for vids like yours. I’m using my mom’s old machine and none of the newer tutorials are helpful since they all use new machines!
@lynmon719811 ай бұрын
I use my sewing machine seldomly so I come back to this video every single time to remember how to use it, I really appreciate it!
@dianegao91762 жыл бұрын
Thank you for the video. This is the best tutorial video for sewing on a Singer sewing machine I have ever seen on KZbin. I have just started working on my first project. You make my work easier.
@rainbowcreation62202 жыл бұрын
Thank you so much for simplifying the the procedure . Reconnecting with my Old Singer Machine nearly after 2 decades. God Bless You!🙏😊🙌
@coledow5866 ай бұрын
I just looked for over an hour trying to find how to use the stretch stick options and finally found it! Thank you!
@VinaKay953 жыл бұрын
Thank you for this! I’ve just realised I’ve been threading my machine wrong this whole time 😅 And never knew the hole in the bobbins had a use!
@MiriamElizabethPerezLuna4 жыл бұрын
the best tutorial I saw for threading this model from singer . thanks for posting it!
@caketinfairy3 жыл бұрын
Oh my God I was getting SO FRUSTRATED w other vids where I couldn't actually SEE how to thread the machine. Thanks so much!
@inspiredgardeningwithjanim81103 жыл бұрын
what a great video! thank you. we just picked up this machine at the dump give & take.... excited to get going on it, and I look forward to your other videos. You are clear, concise, and the video shot is excellent.
@kathleenwest14634 жыл бұрын
So.. this is my new machine. As opposed to my old machine, which my mother bought in 1964, also a singer. This is actually really helpful to see it 'in action', and I'll be looking at your other video(s) of this beastie.
@wilhelmstanzl36357 ай бұрын
I also have a "Samba 5" 6215C, mine made in Brazil. It's a beatiful machine, and works extremely well. Video very well made, thank you!
@doodles13314 жыл бұрын
Thanks for the vid! I just thrifted this machine and was struggling with everything, so glad that you made such a detailed video (((: I'm now having issues in getting the machine to actually run (previous owner is very certain that it works) and I think it might be that it needs oiling - would you consider making a video on how to maintain this machine model?
@ehopkins12342 жыл бұрын
Thank you for making this video. I just acquired this model machine. You have made it very easy to get to know it. 💖
@CraftcoreDIY2 жыл бұрын
Glad it was helpful! Enjoy your new machine!
@greynperiwinkle47539 ай бұрын
the best guide on this machine! thank you!
@samanthaames1243 Жыл бұрын
Thank you so much I've just been give one of these machines it's the Samba 4 edition. I want to pick up a hobby and my nan taught me years ago so I'm hoping it's all inthere somewhere. You video has been very helpful
@patriciarose3653 жыл бұрын
Thanks for this video, I bought a very nice Singer 6215C at the Goodwill Outlet for $6.00. The foot pedal was included ( a near miracle ), but of course, no accessory box, just the general purpose zigzag foot screwed on. I do need to change the bobbin (thank you!) and adjust the tension. I love that the overcast stitch is included in the machine. I just subscribed. Your presentation in this video is very professional!!
@CraftcoreDIY3 жыл бұрын
Thank you so much!! I appreciate the feedback! 💖
@functionmouth4 жыл бұрын
thank you so much! so helpful for this old and weird machine!
@jlo1683 жыл бұрын
Thank you for the perfect lesson, i just brought this machine from someone for 30 €😄!
@peteryao2008 Жыл бұрын
Thank you for the instruction. Right to the point!!!👍
@elizabethherrera4847 Жыл бұрын
very clear to understand, thank you!!!
@patricia.antlitz3 жыл бұрын
Oh baby Jesus that was so helpful! I have a 6211c and that helps a lot! Thanks!
@CraftcoreDIY3 жыл бұрын
Glad it helped!
@patricia.antlitz3 жыл бұрын
@@CraftcoreDIY can you post a video on how you oil/grease this machine? Also, I dont have a manual, will buy one online, but do you know if the internal mechanism (not the needle and the bobbin parts) needs to be oiled/cleaned/greased?
@Deborah-mx8jc3 жыл бұрын
Thank you SO MUCH for this video!
@CraftcoreDIY3 жыл бұрын
I'm so glad it helped! 😊
@dianaaugspurger41846 ай бұрын
Excellent review
@susanstapleton76233 жыл бұрын
My sewing machine is the 6217C. Mine is so old but working great. Sold my vintage machine
@Selchie Жыл бұрын
Thank you so much :) helpful Video!
@tmfoote62 жыл бұрын
It’s very difficult to see what you are doing at times, no matter how many times I rewind. Stuck on Inserting the Bobbin. I have to go looking for another video now
@RachelRinseRepeat3 жыл бұрын
Wonderfully curated video.
@dayanatorres39204 жыл бұрын
Entendí más en este tutorial en inglés que en todos lo que vi en español, y solamente viendo el video porque no hablo inglés, graciasssss
@AmarteDuele0410 Жыл бұрын
Hola, disculpa sabes si es heavy duty, como para telas como mezclilla??
@christinebrown33595 жыл бұрын
Very familiar machine. I'm pretty sure this is the one my Mom used when I was a kid.
@deborahjongsma94884 жыл бұрын
You are a lifesaver! I bought this sewing machine from a kijiji seller with no manual, but a video is much easier to follow than a diagram. I only got one bobbin with the machine, so I followed your link to purchase more. There are two types that look very similar, one is part number 312956 and the other is the same number with -S after it. Can you tell me which one is for this machine? Thank you so much!
@katelynnearwood10885 жыл бұрын
My machine broke.. I’m so sad! Great video!
@CraftcoreDIY4 жыл бұрын
I'm so sorry to hear that! Hopefully you can get it back up and running. :)
@Ashs41Ай бұрын
Cool just got as a gift 8618 it’s look’s very similar
@edakalay Жыл бұрын
Thank you. Very useful. But I have one question. On the 4:49th second of the video, the button right next to the stitch selection panel showing two different kinds of zigzags (at the very right of the screen), is that used for buttonhole stitch balance? Or what? Any video I watched till now , unfortunately skipped that information everytime. Thanks in advance.
@macrinecomendador53983 жыл бұрын
Hello! I have the same machine. But I don’t know why the last guide before threading it into the needle is missing on my machine. Will this affect the sewing?
@revokizamwenge32413 жыл бұрын
Thanks you so much for the video 📹I really appreciate and it helps me a lot may God bless you 🙏
@eloinasanchez52043 ай бұрын
Muchas gracias ❤
@victoriamahoney8262 Жыл бұрын
I have this machine, one super similar, as my second threading part is different, or maybe missing a piece 🤷♀️. But I cannot seem to get a nice regular stitch anymore..... any suggestions?
@niqht_skxy35304 жыл бұрын
The bobbin threading isn't working for me - please send help!
@rhondamercado752711 ай бұрын
Can you tell me how to take the tension assembly knob off? I don’t see a setscrew anywhere.
@duellregan7026 Жыл бұрын
Troubleshooting trouble shooting question. I have the 6606 model which is almost the same. It worked fine for a few test patches but now I have a problem where the main spool thread is getting wrapped around the bobin.
@justinehirschfeld9491 Жыл бұрын
Any solution?
@subinagram75273 жыл бұрын
Hiya, i have a model like this one, what size needles should i put in it , so many different ones some assistance please 😣😣
@thesunsettt40234 жыл бұрын
I like this machine so much,how can i get it,and what it's price?
@sapasche2 жыл бұрын
Did you post the video on adjusting the timing?
@CraftcoreDIY2 жыл бұрын
I did! kzbin.info/www/bejne/iqbOeXxog8dng7M Here is the video. 😊
@AnjuParikh-o5p9 ай бұрын
Can you tell me my sewing stichies going backwards
@lilliekat11033 жыл бұрын
I am very very confused at the bobbin bottom part. I have a model (unsure which) that is completely identical on the bobbin bottom part. I had a hard time seeing what you were doing
@mlyu424 жыл бұрын
Also, is there an easy fix for the stitch length that will not change. I set to 5, but it is still giving me very short stiches
@merlieberdadero99077 ай бұрын
thank u
@missmary07122 жыл бұрын
Someone knows where can I get some parts for this sewing machine.. I need the slide plate, feed system, needle plate ..thanks in advance!
@aziza-eo9lx3 жыл бұрын
شكرا لتوضيحك انا عندي مشكل في الة الخياطة كتقطع الخيط
@cheezhead69 Жыл бұрын
Thanks for the video, i was able to load the bobbin properly and sew stuff.
@lamkk67093 жыл бұрын
Hi, how you adjust the timing issue of the sewing machine? I got the same problem, please help.
@OPERATIONTOES3 жыл бұрын
is there a 6212 machine also, or just the 6212c machine?
@verehalstead8722 жыл бұрын
Hello l don’t know if you will answer this but…l have this machine l rec’ d from a women at a yard sale but l noticed you use a metal bobbin when showing how to wined thread on the bobbin BUT you place a plastic in bobbin case to sew ?
@CraftcoreDIY2 жыл бұрын
Good morning! Yes I had multiple metal bobbins that were compatible and I didn't want to unwind the thread that was already on the plastic one. Purely a waste prevention method. 💜 Hope you are enjoying your new machine!
@verehalstead8722 жыл бұрын
Thank for replying this help's I spent money overhauling it again cheers!
@jeffreylucas34212 жыл бұрын
Help, I am trying to learn to sew my work pants. My mom just passed away and she was a passionate seamstress sewing her own clothes and making all sorts of related things around her house. I am up to a new learning experience. I hope the don't take away my MAN card! lol
@mlyu424 жыл бұрын
How do I remove the panel to change the light bulb?
@sophievautour85732 жыл бұрын
Hey i have this Samba 5, and the size of the stitches feels much to short. The fifth size is small, and * 4 * 3 * 2 * 1 * 0 are useless to use. I rather need larger stitches for certain types of sewing like heavy fabrics. ..do you know why it is like this, and if it is possible to adjust the setting somehow? Do you have the same problem?
@sophievautour85732 жыл бұрын
I'm so happy to have a machine at last, and hope i can make it work out!
@sophievautour85732 жыл бұрын
Oh wow. you talk about stitch width and also stretch stitch, i will try those settings out!
@psychambi49394 жыл бұрын
is there a specific bobbin that has to be used?
@CraftcoreDIY4 жыл бұрын
Yes! You'll need the Husqvarna ones that are compatible with this series of sewing machine. I like the Sewingpartsonline because you can search your model and the accessories are guaranteed to fit. www.sewingpartsonline.com/viking-1070-sewing-machine-parts.aspx?sort.ss_cat_sort=desc&index=88. Unfortunately it looks like both the clear and metal bobbins are out of stock right now. ☹️ I bought my bobbins for this machines from my local quilt shop, Ultimate Sewing Centre in Oshawa. I brought my machine in and they were amazing to find me the perfect match! Of course that was before Covid. ☹️ Good luck!
@CraftcoreDIY4 жыл бұрын
Sorry I thought you were commenting on my Husqvarna 1070 video! Just noticed this is the Singer video. Oops! Here is the link to SPO for this model: www.sewingpartsonline.com/singer-6251-sewing-machine-parts.aspx?sort.ss_cat_sort=desc&index=1
@mariaelenazavalazavala5606 Жыл бұрын
Muy buena explicación.....solo q es en inglés....y no le entiendo....
@tasya10773 жыл бұрын
Можно на этой машинке использовать свободноходовую стежку?
@ruthnoemicastillodeortega29024 жыл бұрын
Dónde puedo hallar este manual en español 6215 Singer
@Swertrestv794 жыл бұрын
how many watts that kind of sewing machine
@ireneruddy15782 жыл бұрын
Why does my bunch up on the bottom
@suemerino18243 жыл бұрын
Ola solo me cose por debajo y la puntada de abajo esta arriba kien me ayudaaaaa plis
@elsapedraza7836 Жыл бұрын
Necesito un foco
@lucasbikner22782 жыл бұрын
muyyyyy linda
@tinascopelliti8734 Жыл бұрын
In italiano
@giselegamache33552 жыл бұрын
En français
@3alamalkhiyata9643 жыл бұрын
Vous morning! Au have thé problème are susceptible s.vpgood morning à y a un problème et une machine et vous pouvez
@usmanbasha37782 жыл бұрын
Taking hindi
@eloinasanchez52043 ай бұрын
No abansa la tela😅
@usmanbasha37782 жыл бұрын
Pils toking hindi
@usmanbasha37782 жыл бұрын
Pli taking hindi amo 😴😴😴😴😴😴😴
@naimaelhassani13653 жыл бұрын
. . Mc
@jnnakle1013 жыл бұрын
Where can I change the speed of the needle? It’s too fast for me.
@CraftcoreDIY3 жыл бұрын
You should be able to control the speed if you press more lightly on the foot pedal.