How to Tie-Dye with Rit Dye

[@kaitlinkimberling8691]

I have had better results with letting the dyed shirt sit in a closed container in a warm room for at least 24 hours than with microwaving. I generally apply the Color Stay after the shirt has set for 24 hours, then I let the shirt sit overnight. That has led to vibrant colors. When I microwaved the shirt and immediately washed it, the dye turned out pretty dull, but sometimes that is the desired effect. Microwaving can also be messy, as the dye juices can bubble up and bleed into other parts of the shirt, or leak into the microwave itself.

[@ritcolorcommunity]

Great tip Kaitlin! We'll share this with our team.

[@hotcakeninja6363]

Do you still wrap it in plastic?

[@h.r.c.2829]

I did this but I think the fact that it sat so long let the dye soak in to the white parts, you can kinda tell it's tie dye but not really. It looks cool but I think I should've followed the video so it didn't have time to soak through the shirt

[@ErikaTati]

Just did this yesterday. The first set I used the measurements rit fixative and everything bled through. The shirts are still nice. For the second batch I increased it to 1.5 tablespoons per 1 cup of water and the white parts stayed white! I'm super Happy! Oh I also left the dye over night. I forgot to put a napkin in one of the bags and the colors sort of blended together on one side. But it still came out nice! Thanks for the tutorial!

[@caitlynroberts3100]

Did you leave it sitting before or after rinsing in cold water?

[@ErikaTati]

@@caitlynroberts3100 I think I left it sitting. I made so many shirts. The only color that bled through regardless of the fixative was the red. My last technique was me basically, Prewash shirts Dye them leave them in a plastic bag overnight with tissue then add fixative Then microwave Rinse and then wash. The shirts that I kept are still good but I wash in cold water. I’ve seen some that I made on others and they faded but I think it’s cuz they wash with hot water like when they do their laundry.

[@ErikaTati]

@@caitlynroberts3100 I did not rinse the color off and the put fixative...

[@caitlynroberts3100]

@@ErikaTati thank you so much, I really don’t want to have to buy more shirts, I’m trying to get this right the first time 😂

[@ErikaTati]

@@caitlynroberts3100 np. Hope it works out!

[@ducky6750]

Thank you!! We actually followed this video today for our very first tie-dyeing. Our shirts came out amazing!! Very vibrant colors. I am now looking forward to dyeing yarn for knitting!!

[@estherlopez4310]

Do you wet the shirt first?

[@Missy-Leigh]

This guy is like a better looking version of John Mayer. 😂

[@I_do.not_fearyou]

The most custy comment ever.

[@zhollings]

Nah

[@claudiah421]

bro john mayer is jacked r u kidding💀

[@felipearaiza2903]

I don't care how the shirt looks in the end wet results. I wanna see how it looks when it's all dry. Is it dull? Or nice and vivid

[@ritcolorcommunity]

Totally get that! The blue scrunched sweatshirt was actually posted to our Instagram last week dry. And vibrant might we add. Check it out!

[@joeyhooo]

@@cherylwillrich6324 are you always this rude or...?

[@tori5598]

@@joeyhooo she's got a point tho

[@joeyhooo]

@@tori5598 cool, but it's called manners. people stink of entitlement. Anyway this was a great video so thank you Rit Dye!

[@manicdriveblue]

@@cherylwillrich6324 LMAO Do you ever pay attention or is it only on special occasions? It is definitely posted

[@jerryparisi2885]

Thank You, Your A Good Teacher. You Showed Me Just What I Needed To Know.

[@psuprofnichols]

So, I did not dilute my Rit Dye....and you guessed it, I was cold rinsing for days -- in the back yard with the hose. Luckily, the Arizona sun dried it nicely when it was finally a clear rinse.

[@SK22000]

Tie dying is a lot of fun to do with kids when the weather isn’t so nice outside

[@viciouslyxdelicious]

Love the echo when you say hi there

[@agen_dior]

i fully didnt pay attention to the instructions thinking i got this ive now got two ruined shirts ill pay attention next time

[@ishitavasani4302]

He is so cute 😍

[@oliviahoutte6692]

😍😍😍🤤

[@Twix_15.]

This is awkward

[@oliviahoutte6692]

@@Twix_15. lol

[@cynthiawithers6099]

Loved the informative tutorial of using Rit dye. I would like to know how many rubber bands were used in his pinch shirt technique.😊😊😊😊😊Thanks so much!!

[@tori5598]

u dont need a specific amount of rubber bands, just use as many as you think you need to keep it secure

[@jacquievogler9038]

really wish I could find a video like this using the dye more product.

[@ritcolorcommunity]

You wish is our command: kzbin.info/www/bejne/g5CXhHigqsh0ZsU

[@joannebritt7174]

Love it on my way to Walmart.

[@deraymason4187]

My store did not provide any fixative. Is this ABSOLUTELY necessary?

[@ritcolorcommunity]

It is optional! But it does help prevent bleeding long term.

[@jasminevargas9981]

I used condiment bottle to mix the 2 cups with 2 tbs of dye now I have a lot of dye left over how and how long can I store the unused dye? Thanks :)

[@ryanw158]

I tested this process with the microwave and without - I felt the microwave one looked dull compared to the one not microwaved

[@idkc250]

So instead of microwaving it, you just left it in a bag for 8 ish hours like with other dyes?

[@allgoodthings8938]

That is how mine turned out as well and I used soda ash before coloring

[@KetiTeacher]

@@allgoodthings8938 That didn't work for me. Rit dye is not a Fiber Reactive dye and the Soda Ash does not fix the Rit dye. Rit dye requires heating in microwave.

[@urmomv1nce45]

The only thing I’m worried about is microwaving of rubber bands

[@CarlieBond]

I know that you’re supposed to mix it with hot water so the color looks how it should, but is it okay if after you mix the dye it cools? We are doing a tie dye party and I was going to pre make some (with hot water) but wasn’t sure if they sit for 30 min if that’d mess the colors up!

[@ritcolorcommunity]

Oooh, tie dye party. Sounds fun! You actually don't need it to be that warm as long as you apply heat to it after via the microwave for two minutes or leaving it in the sun for a couple of hours.

[@capybaraxbanana]

Him: You don't need to be to perfect at his Me *a perfectionist*: WHAT!

[@1Corinthians2.2]

I know, right? My niece tells me she likes it while I'm saying, "But it didn't turn out right." Once I get a vision in my head of what I want it to look like I am disappointed when it doesn't look like I imagined.

[@CurtisxJacob]

Would love a video on using Black Rit. All my tie dye attempts with black go grey/bleed into all the white.

[@shannansutton1422]

Have you tried reverse tie dye? I have a friend that starts with a black shirt and "dyes" it with bleach first. Then after they add the color only to the bleached parts. Maybe that's more your style?

[@ritcolorcommunity]

Ok! We'll add it to the list. To prevent bleeding, we do recommend rinsing the fabric really really well with cold water while it is still bound before you wash it. That will get rid of any unabsorbed dye that might come off in the wash. And applying ColorStay Dye Fixative.

[@mayr.7376]

Can I use half the amount of dye to get a pastel effect?

[@courtneyburkett3360]

I want to know the same thing! Less dye or let the dye sit on the clothing for less time? Or both?

[@ritcolorcommunity]

Yes you can! And squeezing the dye on a paper towel will give you somewhat of a reference for how the color will look.

[@mayr.7376]

@@ritcolorcommunity thank you!

[@stephanieatkinson534]

I didn't have all my shirts delivered yet when my grandkids visited. We did their shirts and I saved the mixed dyes in the bottles at room temp. Now all the shirts have arrived. Can I still use the saved dye that had already been mixed and sitting for a week?

[@darkspectrum4772]

This is something I wanna know as well. How long is the dye mix good for?

[@ritcolorcommunity]

Hi there! Rit has an unlimited shelf life. When storing liquid dyes, be sure the cap is secure to prevent evaporation. Powder dyes should be stored in a cool, dry place. If you want to store powder dye after it has been mixed with water, you can do so in an airtight container like a mason jar.

[@ritcolorcommunity]

@@darkspectrum4772 Hi there! Rit has an unlimited shelf life. When storing liquid dyes, be sure the cap is secure to prevent evaporation. Powder dyes should be stored in a cool, dry place. If you want to store powder dye after it has been mixed with water, you can do so in an airtight container like a mason jar.

[@tequilaamy]

why microwave? I’m just asking I’m trying to get 25 high schoolers to tie dye next week and idk if I can do microwaving 25 shirts at this party

[@ritcolorcommunity]

Our dyes are heat activated! You can also just leave them out on a sunny day. Hope this helps!

[@bubblebuddy7542]

Couldve put blue all over that sweater. It wouldve had white still.lol

[@Kat-go1xu]

I have heard that putting nitrogen (urea) pellets in with the dye and water makes the colours continue to be vibrant and help them not to fade over time. Would you suggest doing this with Rit Dye?

[@jesscaron7610]

when you put the clothing in the wash at the end do you use soap?

[@ritcolorcommunity]

Yup!

[@1Corinthians2.2]

@@ritcolorcommunity Do I need to use Syntrapol or other dye friendly soap or can I use regular laundry detergent like Purex?

[@2tamz603]

The microwave thing is throwing me off. I used to tye dye as a kid in the early 90s. We sat the shirts in the sun for at least few hours and it came out great. Maybe I'm to Gen X to know about the microwave trick and the fixative dye fluid is new. We use to push the dye out before drying. Different techniques and strokes for different folks. That shirt I did lasted 5 years later then I got if teenage years and threw everything out. Cool technique that I'll try now

[@ritcolorcommunity]

Hey there! The microwave technique is for those who don't have access to the sun during all seasons--it essentially does the same thing, heat sets the dye.

[@pxjxgx]

Ah! It's the dye fixative isn't it? 😬 i wish I had started by watching this before experimenting lol

[@FrenchFriesInTheSnow]

I used a soda ash mixture and it worked for me instead of the dye fixative :)

[@avataymouri]

Do we do the same thing for the powder rit dye?

[@ritcolorcommunity]

Yes! The process is the same.

[@penelopeangeles8718]

Rit Dye thank you!

[@ritcolorcommunity]

@Jennifer Nauman here is our handy conversion chart! www.ritdye.com/instructions/powder-conversion-chart/

[@shana4806]

why does my tan dye turn out a peachy orange?? 😫

[@mackenziepearce4416]

if i was to make a set (jumper and tracksuit) would I still have to wash them separately even if they were the same colours of dye?

[@ritcolorcommunity]

Nope! Good question. You can actually wash them together since the same colors were used.

[@Iuxinterior]

can we just put the shirt in a colorstay bath then rinse? not really keen on microwaving my shirts lol

[@TheMissallybee]

Any update?!

[@doityourselfbombs]

yes you can, you just have to leave it on longer.

[@YourDadElle]

When we day wash with a towel, do we mean with detergent or without 👀 I always used to run it through a cycle without detergent as a kid but that’s with different dye and such

[@vermontmom4232]

Thank you!!!!

[@aubriegriffith5055]

Do u have to use the fixative

[@daisymae3717]

I tie dyed with rit for the first time (I usually use tulip 1 step but it's sold out everywhere) I added the color fixative into the dye itself, is that wrong? I'm thinking of switching to rit since I am tie dying more often.

[@ritcolorcommunity]

Happy to hear you are trying out Rit Dye! The fixative is not applied until after you have dyed the item. After you have completed dyeing your item, you will create a new dyebath with fixative. Here are instructions on how to use the ColorStay Dye Fixative: www.ritdye.com/instructions/how-to-use-rit-color-stay-dye-fixative/

[@ipmanoo9250]

@@ritcolorcommunity hey there! I’m about to start my first project, and have everything but the fixative. Is it okay if I don’t have it or are they any at home products I can use instead? Thanks and lmk!!!

[@ritcolorcommunity]

@@ipmanoo9250 That's exciting! You can apply ColorStay Dye Fixative at any point after the dyeing process to help with fading and color retention, even long after your project is dry! Just make sure to rinse your item in cold water really well after the dyeing process, that'll help prevent bleeding.

[@aernphilips1262]

I need this product in Thailand.

[@madzplayz8233]

What if I don’t have the dye fixative is there a way I can make it myself?

[@ritcolorcommunity]

No, you can't make Fixative yourself. Fixative is not a requirement, just good to use to help retain the color.

[@highlyfavoured1671]

Vinegar and salt in water is an alternative

[@spadesquadgaming1427]

Dose it matter if I mixed regular RIT with Synthetic RIT?

[@joandejesus6496]

Can you place it in the oven instead of microwave?

[@lindseyb.2318]

What if we don't want to microwave (all that plastic wrap! Yikes!) and the urge to tie dye comes on a cloudy day? Can we just let it sit longer, and for how long then?

[@ritcolorcommunity]

Good question! Heat is needed at some point in the process. That is what opens up the fibers in the fabric to accept the dye. So if you didn't want to use your microwave and leaving the fabric outside wasn't an option, you could actually fill the bottles with really hot water. If you go this route, you may want to hold the bottles with an oven mitt since they may be too hot to hold.

[@jacobren9616]

Looking to tie dye soon

[@hotcakeninja6363]

How essential is the microwave bit? I’ve got metal rivets on my jeans and a metal zipper on my hoodie. Is it just the heat that locks it in? Might I get away with a sort of sous vide?

[@ktbranscom9473]

maybe you could try a hair dryer?

[@naomiefarran8038]

Can you save the unused mixed dye? Like reheat it another time?

[@annabanannabitch]

Is the microwave part necessary? I’m trying to tie dye a blanket/throw and it won’t fit in my microwave

[@anthonysebastian7402]

I was wondering the same thing - I'd rather not need to wrap every garment in plastic and microwave. I also haven't heard of doing that with other methods.

[@ritcolorcommunity]

Instead, you can leave it out in the sun for a few hours!

[@anthonysebastian7402]

@@ritcolorcommunity Ok thanks!

[@tori5598]

@@anthonysebastian7402 i think it just makes the color brighter for longer? so its not entirely necessary either way

[@anthonysebastian7402]

@@tori5598 Gotcha, thanks Tori.

[@ryleyblair46]

Is the microwave part optional or should we do it for sure?

[@ritcolorcommunity]

Yes, we strongly recommend using the microwave. Using a microwave creates a heat chamber that helps bond the dye with the fabric. If you don't have a microwave, we recommend letting the tie dyed item sit in the sun for 1 hour.

[@melissaaragon2152]

Rit Dye I won’t burn my house down right ?!😂 I want to tie dye onesies

[@devbachu7072]

Do you add soad ahea mixture first

[@kaylab.7424]

Do i absolutely need the fixative stuff??

[@ritcolorcommunity]

It is optional! It just helps prevent bleeding long term.

[@kaylab.7424]

@@ritcolorcommunity awesome! Thanks for getting back to me! Ive looked in my stores and I cannot find the solution anywhere. And I don't like to online shop lol....wish me luck, off to tie dye! 😊

[@digitalkenz]

Kla webs can you tell me how it turned out!! I don’t have the product either

[@kaylab.7424]

@@digitalkenz yes i will let you know!(:

[@erinescence2095]

@@kaylab.7424 My supermarket has Rit and the fixative in the detergent aisle, so that might be another place to check.

[@ericacampbell6067]

Just curious do you need the use the fixative? I’m trying to get 7 shirts done by this Sunday and have black and blue but will have white type from a Cricut to put on after I’m done

[@ritcolorcommunity]

ColorStay Dye Fixative is totally optional, but does help keep the white areas white and the color vibrant for an extended period of time.

[@airjordo4395]

Can I still put the shirt in the microwave if it has a screen-printed graphic on it?

[@silverlining1973]

I wouldn’t. Especially if there’s any metallic sheen to it.

[@djlive408]

Can I reuse the bottled tie dye or do I need to re-warm it up?

[@ritcolorcommunity]

Yes, but we do recommend warming it up in the microwave beforehand.

[@gloriagiefer3013]

Would you recommend any other kind of procedure for canvas bags or could I use the same for t-shirts or 🧦

[@ritcolorcommunity]

You can use the same technique!

[@savillah]

I followed the instructions in the video to dye my canvas tote bags. The only problem was that I can't get the wrinkles out of the canvas now. I pre-washed the bags before I dyed them & they were wrinkle free before I dyed them. I think the microwave must have "set" the creases (wrinkles) and now I can't get them out completely. I even tried to press them with my Cricut Easy Press at 375 degrees.

[@azjade3927]

I used the dye full strength and let the fabric dry outside in Arizona 104 degrees direct sun without rinsing.... Not sure what's going to happen, but can't wait.

[@tamm516]

How did it turn out?

[@evelynnn7610]

do I have to let it sit until the next day? Or can I wash it the same day

[@CarlosGuzman-yz9ut]

but like, do you have to put it in the microwave?

[@loganpie3964]

but i thought we couldn't microwave plastic wrap 👉👈

[@nguyen8777]

We could we just couldn’t microwave aluminum foil

[@ritcolorcommunity]

You can!

[@KetiTeacher]

At the end, when I put the clothing in a washing machine, do I need to add dye fixative again or just plain detergent is enough? Thank you

[@ritcolorcommunity]

Hi Keti! Once you apply Rit Dye ColorStay Fixative and rinsed it out, you can wash it in the washing machine with detergent. Hope that helps!

[@NomadAngie]

I want to tie dye bed sheets but I'm afraid the color sticks to my clothes and skin as soon as I lie in them. Is that a common occurrence?

[@tori5598]

as long as the water comes out clear when you're washing them after, you should be good

[@ntptingz1864]

Are there any other ways to keep the colors bright if you don't have the fixative?

[@ritcolorcommunity]

Heat is the key! You could apply heat by following the microwave instructions in the video. You could leave the fabric out in the hot sun for a few hours. Or you can use hot water in your squeeze bottles. Or a combination!

[@chrinamint]

I accidentally bought the DyeMore kind. I didn't realize there were more than one kind. I saw Rit and got my colors. I just watched some videos and saw some comments and realized I bought the DyeMore. But I plan to do plain cotton shirts. Can I still use this or do I need to take it back?

[@ritcolorcommunity]

Hey there! You can use DyeMore on cotton and it'll be fine!

[@AfroSnackey]

What if I have the powdered variety of dye? How much would I need to put into water?

[@racheldonovan8744]

What is the best way to tie dye using rit dyemore? Do you always have to dip it in boiling water or is there another way?

[@ritcolorcommunity]

You can tie-dye with DyeMore, but the process is just a little different since you will need to dye with high heat on your stove (which is needed for synthetics). For instructions, head to our website and look at the immersion method for tie-dyeing. www.ritdye.com/techniques/tie-dye/immersion-technique/

[@janessacampa4932]

Is it possible to do it the way where you leave it to sit instead of using a microwave?

[@ritcolorcommunity]

Heat needs to be applied at some point. Leaving it to sit does help, but heat is what really sets the dye. It opens up the fibers in the fabric to accept the dye. You could do this by using hot water in your squeeze bottles (but it may make them a little hard to hold), the microwave process we show in the video or leaving the fabric out in the hot sun for a few hours (if it's sunny and hot).

[@kateoriordan7490]

If I dilute the dye with a higher ratio of water will it be pastel?

[@Caymiya]

But why the microwave??🤔 I’ve only used tulip brand tie dye so I’m confused.

[@1Corinthians2.2]

Tulip dye now offers the microwave containers for the 2 minute and 30 second tie dye....and it works pretty well. .I guess it's the new thing. Just be sure it's still fully wet/damp or it can scorch. Tulip dye says it's only for 100% cotton items. I am trying to find out how long to set the dye if I don't use the microwave. (Rit website also says you can sit it in the sun for an hour if no microwave...but would some other source heat set it, is what I want to know.) The microwave idea is for quick reveals. You don't have to wait overnight or the 6 or 8 hours Tulip suggests. You can microwave and cool it for fifteen minutes (with Tulip) and then start your rinse out.

[@gbaculina]

After removing the item from the microwave, how long must I wait for it to cool down before rinsing in cold water?

[@ritcolorcommunity]

You only need to wait a few minutes for the fabric to cool before rinsing in cold water. Have fun and good luck!

[@erinescence2095]

I think you're waiting for it to be cool enough to handle comfortably, so not long. The items will be extremely hot when you first take them out of the microwave because they were so wet. Might even want to leave them there (with the microwave off) for a minute or so in order to prevent burns--especially if you are doing this project with kids. Even when the edges feel cool, it's still going to be hot inside the rubber banded portions.

[@1Corinthians2.2]

I have seen or read where some people add salt to Rit dye. What is this for and is it necessary?

[@ritcolorcommunity]

When cotton yarn or fabrics are dyed, salt is added to the dye bath as a mordant to help the fibers absorb the dye. It's not totally necessary but helps to fix the dye into the fabric. Hope this helps!

[@chloebrooklyn184]

Is it OK if you don’t used to dye fixative

[@jessicaabigail3719]

will this dye work with 50% cotton and 50% polyester? i’m okay with it being less vibrant but will the dye still work? also can i leave it out in the sun instead of microwaving it because it has some metal on it?

[@erinescence2095]

I used Rit Dye yesterday to do a cotton t-shirt, some socks and a Hanes EcoSmart sweatshirt(50/50 cotton/poly). For the shirt and socks, I microwaved them. Was worried the polyester in the sweatshirt might melt if I microwaved it. I had considered leaving it in my black car in the sun, as the interior gets quite hot. But it was too late in the day for that to really work. Ended up using a hand-held blow dryer on the sweatshirt for about 15 minutes after I'd put the Fixative on it. Worked really well! The color held and the white parts even stayed white! Should note that I did use hot water in every step along the way (to mix the dye, with the fixative) as well. For all items, i used the liquid Rit made for natural fabrics.

[@avajenne8450]

Do you have to microwave it??? And can you mix the regular one and the dye more one?? We are tie dying tomorrow so I really hope you answer in time! Thank you!

[@tori5598]

this is late but you dont need to microwave. just let it sit for 8-ish hours

[@avajenne8450]

@@tori5598 Yeah we had let it sit over night! Thanks for replying!

[@janicebr29]

@@avajenne8450 I don't have a microwave. Did it work without the microwave?

[@chelseab4172]

Do I have use the color stay? Also do I have put it in the microwave?

[@ritcolorcommunity]

Hey there! ColorStay is optional and if you dont have a microwave, you can heat set your item in the sun or with a hairdryer. www.ritdye.com/instructions/using-rit-all-purpose-dye/

[@adrib.3882]

After putting it in the wash do I hang dry it or put it in the dryer

[@melissatrogani7657]

If I'm doing multiple shirts at once can I put them all in the washing machine at the same time?

[@ritcolorcommunity]

As long as they are all with the same colors. If not, we recommend washing them by color grouping.

[@andrewpickett844]

I habe a yellow hoodie I want to dye green, should I bleach the hoodies first before dying? Or just go over the hoodie with the dye?

[@ritcolorcommunity]

For the best results, we recommend using our Rit Color Remover product to remove the yellow color before dyeing the hoodie green. If buying our Color Remover is not an option, then you can try and dye over the current color. As long as the green color is going to be darker than the yellow color, it should work. We do not recommend using bleach to remove the color prior to dyeing. Best of luck!

[@zhanarriamohogany6045]

Is the washing machine step necessary? Because I thought if u washed it out really good to where it was clear it would still be wearable

[@ritcolorcommunity]

The washing machine step just ensures that all dye has been removed and that the clothing is ready to wear.

[@cheyboyd135]

How long do I let the die sit before washing it out ?

[@ritcolorcommunity]

After you apply the dye, let it sit for 30 minutes. Then, put it in the microwave for two minutes (as long as the fabric doesn't have any metal parts). The microwave will apply the heat needed to set the dye. After it cools down, you are good to go!

[@cassurb]

How can you prevent red from bleeding? I followed all the steps! :(

[@ritcolorcommunity]

Hi there! We found that dye bleeding usually happens in the rinsing process. Make sure to heat set in the microwave, apply ColorStay Dye Fixative right after dyeing, and rinse in cold water while fabric is still bound until rinse water runs clear-this step might take a while depending on how absorbent your fabric is. If you’re still having trouble, please reach out to our dye specialists at [e-mail] and they’ll help you troubleshoot.

[@godsfavorite6066]

What happens if we don’t apply the dye fixative?

[@ritcolorcommunity]

Fixative is used to help retain color but if you don't apply, you'll still see the same great results.

[@sophhjade]

So I tie dyed a bunch of shirts, can I put them in the wash all together? Or I have to wash each shirt separately in cold water?

[@LilGagaChick]

Separate

[@abbibutton]

I put mine all together & they worked fine

[@ritcolorcommunity]

Hi! Please wash them separately. If you don't the unabsorbed dye might bleed onto the other shirts. All you need is one cycle with the speed wash setting!

[@gloriagiefer3013]

Can I use a regular laundry detergent or would you recommend Dawn soap or something else

[@ritcolorcommunity]

Either will work!

[@Seguuuh]

Would using my conventional oven be okay to use as well? Warm setting for 2 minutes? 🤔

[@monstershayne]

Wondering the same thing, I noticed that when you microwave it, dark dye can evaporate onto the plastic wrap and then get onto places that it's not meant to be.

[@ritcolorcommunity]

Good question! And yes you can! Please make sure it is wet when doing this. Set the oven to 200°F and leave the item in for five minutes. Also, don’t walk away from the oven just in case!

[@Seguuuh]

Worked perfectly! Thank you!!

[@dsanti9158]

Would I still have to wrap it in plastic wrap when putting it in the oven?

[@TheReeW]

How long does the dye last in the bottle? Can it be saved for another use?

[@ritcolorcommunity]

Rit has an unlimited shelf life. When storing liquid dyes, be sure the cap is secure to prevent evaporation. Powder dyes should be stored in a cool, dry place. If you want to store powder dye after it has been mixed with water, you can do so in an airtight container.

[@KetiTeacher]

No salt is needed in a squirt bottles? Thank you

[@ritcolorcommunity]

Hi Keti! We recommend adding 1 tablespoon of salt to your squirt bottle dyes. You can find our complete squirt bottle tutorial here: www.ritdye.com/techniques/tie-dye/squirt-bottle-technique/

[@randy25rhoads]

So when you wash it in the washing machine, are you supposed to use any detergent? Or is it just cold water and the towel to soak up the dye that bleeds off?

[@ritcolorcommunity]

You can use detergent too.

[@VanessaBuetts]

So I did all the things it said, including the fixative, and when I washed it, my white parts weren’t white. I did red and blue for 4th of July and now the white parts are purple 😭. Where did I go wrong? If I just want them for one day could I just air dry? I never have luck when I throw them in the wash.

[@ritcolorcommunity]

Sorry about that! It sounds like there was unabsorbed dye still on the fabric that came off in the wash and went into the white areas. The best way to prevent this is to rinse really really well with cold water before the wash while the fabric is still bound up.

[@nataliemoore4094]

Hi there! Is there a certain way to tie dye with Rit DyeMore? I want to only make certain parts of my hoodie grey but leave some of the white. Any help please? Thank you!

[@ritcolorcommunity]

If you are trying to tie dye with DyeMore, you will need to use the immersion method as DyeMore needs to be added to very hot water on the stovetop. You can learn more here: www.ritdye.com/techniques/tie-dye/immersion-technique/

[@taniaarora5103]

Can i do the same thing without the colorstay product

[@jacobren9616]

Should I use the color stay or soda ash?

[@deborahmaduka4736]

How long do you put it in the microwave

[@erinescence2095]

Rit recommends 2 minutes

[@osamah.mohamed3629]

Does this Rit dye will fix my carpet color faded or not ?

[@viciouslyxdelicious]

I’m doing everything it says but when it’s time to rinse it almost like all dye just comes Out And then after I wash it and dry it is incredibly faded what am I doing wronG!? Also, where can I find More videos of this guy lol jk

[@ritcolorcommunity]

I am sorry to hear that! This could either be because the fabric is synthetic or because heat isn't being applied. We can do some troubleshooting with you if you email us at the contact form on our website!

[@itsiris9917]

It’s probably because of the quality of whatever u tie dye because whenever I dye I use cotton based shirts and it works rlly well

[@caitlynroberts3100]

Will the dye stain the squeeze bottle?

[@ritcolorcommunity]

Hi there! That all depends on what type of squeeze bottle you’re using. We recommend testing it on a small section first and cleaning the bottle thoroughly right after dyeing.

[@caitlynroberts3100]

@@ritcolorcommunity thank you!

[@empatulski2339]

Do you wash it with the rubber bands on?

[@ritcolorcommunity]

You keep the rubber bands on during the rinse process. Once the rinse water runs clear, then you can remove the rubber bands and wash with a mild detergent.

[@pxjxgx]

So why are soap and salt not used for this method ?

[@ritcolorcommunity]

The soap is helpful when doing an immersive dye technique to get even coverage on the entire fabric, not totally necessary for the squeeze bottle method. Adding salt is also an optional step that helps the dye to penetrate the fabric, but there's already salt within our liquid formula! Hope this helps!

[@napuawong4923]

I did the scrunched technique with the color graphite. And some of the colored parts came out yellow after washing... any idea what could of caused it?? TIA!

[@ritcolorcommunity]

Hello, Napua. Yellow areas happen when the color seperates. There are a few ways to prevent this in the future. - Start with a dry shirt - Use less dye - Add more heat - Rinse well - Wash on cold right after dyeing We hope these tips are helpful for future dye projects.

[@gabrielaarguedas]

What if I don't have fixative?

[@ritcolorcommunity]

Hey there Gabby! Our ColorStay Dye Fixative is optional and you can use it at any point after the dyeing process, even after you've dried it. Hope this helps!

[@mooney22]

Should we do 1 tbsp of dye if we want like a pastel color?

[@ritcolorcommunity]

Yes, you can start with a smaller amount of dye if you want a lighter color. Test the color before dyeing with a piece of paper towel. If the color is too light, add a little more dye. If the color is too dark, add more water.

[@JulianRodriguez-ji3zu]

I have onesies with the metal clasps, what can I do instead of microwaving? There’s no sun outside either 😕

[@ritcolorcommunity]

If a microwave is not available, your item is too large, or your item contains metal; you can use a hair dryer to apply heat. Slowly apply heat by passing the hair dryer back and forth across the item about 2-3 inches from the surface. Do this process for about 2 minutes per side. If your item large or thick increase the time on each side.

[@mertmert780]

Is the microwave part necessary or can they just sit in a grocery bag overnight? We always do shirts on vacation and obviously it was cancelled this year, so I have about 8 people making shirts.. it’d be easier to send them home with their own bag and let them do the washing rather than running 1 washer 8 times 🤪

[@ritcolorcommunity]

Heat needs to be applied at some point! It opens up the fibers in the fabric to accept the dye. If you don't have a microwave, then you could leave the dyed fabric out in the hot sun for a few hours (if it's sunny and hot). That would probably be the easiest approach! You could also use hot water in your squeeze bottles.

[@star_playz5940]

What about dye more the same thing?

[@ritcolorcommunity]

You can tie-dye with DyeMore for Synthetics, but the process is different. You'll need to do it on your stove to get really hot water. Check out the 'Immersion Method' instructions on our site for full step-by-steps.