How To Tighten a Mirror on a Modern Vespa Scooter

For the largest selection of Vespa scooter parts and accessories in North America, please visit our website:
www.scooterwest.com
Thanks for watching!

[@jonbutler4102]

And I thought I was going to have to go under the handlebars to get in there. Such a simple fix when you know! Mirror is now stable. 👍👌

[@helmuthelfer9136]

Robot thank you so much for this Video ! You are best VESPA man !!

[@ChachiBonacci]

Thank you for this! My Sprint got knocked over today and I was able to move the mirror back into place.

[@VespaMotorsport]

Glad it helped!

[@MadisonKeesler]

You are great. Your video has been so helpful!!

[@marstong]

Thanks, Vespa should pay you to be the US ambassador, do a new owner intro video and include it as a QR code (DVD would be nice too for those inclined) you could view when you get delivery. I was going to have to wait until Tuesday to call the Scooterville where I got my scooter this past Saturday, but you of course had a video on how to adjust the mirrors properly. Thanks again!

[@jackdavis6867]

50cc Vespa rider in Sitka Alaska, always learning more from Robot! Thanks Robot and Scooter west!

[@VespaMotorsport]

Very cool! Glad we could help from the other end of the coast...

[@disposableamerica9702]

Thanks for the video! Appreciated you going over both sides in differing detail.

[@VespaMotorsport]

Glad it was helpful!

[@JLGUITARMUSIC7]

Whenever I look for a questions about Vespa, and if I see your videos..does it...I dont have to look for anywhere..thanks Robot!

[@sharknose425]

As always, a great vid! Keep ‘em coming.

[@VespaMotorsport]

Thanks! Will do!

[@grahamharris4941]

Robot, I have been so inspired by your presentations I have bought an new Vespa GTS 300 and an looking for another 'winter project'; Say no more!

[@VespaMotorsport]

Sounds great! Glad we could inspire and help with your vehicle choices. Thanks for tuning in, we appreciate the support!

[@vespeirodinelli]

Excelente vídeo

[@qflynn7298]

This is so helpful, thank you! My Primavera got loose and I was at a loss.

[@sylviedendievel2355]

I really like your videos. They are very informative. Keep up the good work!

[@VespaMotorsport]

Thank you very much!

[@mtnbkreric1]

Thanks Robot 🙂👍 ‘05 250GTS owner from Cranbrook, BC 🇨🇦 love your videos. Keep them coming.

[@VespaMotorsport]

Glad you like them! Thanks for tuning in...

[@joeltaylor5764]

Exactly what I needed. Thanks.

[@salorjim1000]

Robot, love your videos. Have a 2020 GTS 300 Touring. Purchased a few things from you so far, front rack on the way can't wait to get that on. I had this issue with the left hand mirror but watching your video I see the bolt head to get the wrench on in your video is nice and high but mine is recessed into the plastic and I can only get a sliver of the wrench blade onto the nut. Have you seen this and is there a way to fix it? Thanks!

[@Dinotti]

I love your videos man! Greetings from Vespa gts 2020 owner in Slovenia.

[@VespaMotorsport]

Hey, thanks!

[@jimackerman6343]

Thank you! I’m going to tighten my mirror now!!!

[@estebanmunoz7486]

Great video bro! Greetings from Costa Rica.

[@VespaMotorsport]

Glad you enjoyed it!

[@karolinapiekarczyk9459]

Hello!! Great video thank you ❤️a quick question, I did what your tutorial said but the actual round head keeps flipping down when I ride my scooter, how do you fix that?

[@tavrion]

thank you so much!

[@c.resendiz5361]

hi, 😊 thank you for the video, does this may work for a bv350 2020 ? same issue after 2 months bought , but Im afraid I should dismount the winshield😑

[@Alistorrr]

Thank you very much, just have it playing so you can get your watch time up as well as other stuff I don't know how it you should work but thank you very much very helpful

[@elginbenedict]

Hi, the prob with my sprint side mirror is that it's loose from the ball joint. Is there a way I can tighten this?

I have the same problem. Did you solve this?

[@alhaffar2864]

I have the same problem. Did you solve this?

[@vesparidergarage]

WATH a workshop :-D nice film thank you for shearing

[@VespaMotorsport]

Glad you enjoyed it

[@clairewilliamson8933]

Hi, Great video but can you tell me what to do if the thread inside (on stud or perch?) is worn. What would I need to buy to fix this? Thanks

[@dgo103]

Una pregunta...el tubo de salida del aire tiene que estar libre o va colocado a algo?

[@SheliaGasson]

Could you show how to adjust a loose mirror on a Beverly 400? I cannot find a video anywhere and it looks like I need to go underneath the handlebar but not sure what tool size to use. It didn't tell me in the manual either.

[@kevinsanders3715]

Robot, I have a modern Vespa 2012 300 gts ie, the right Molotov is broken inside the threads, I tried to still a small hole to unscrew the piece out, then I tried a smaller drill bit. Can this mirror hilder part be replaced?

[@solstar4778]

What is the labor for the engine over haul of the Vespa?💲

[@taki384]

How do you install the mirrors on a bv 350?

[@keithmori9806]

I’m looking at buying used 300 of 250 Vespa can you do video on what to look for in the large frame Vespas?

[@VespaMotorsport]

Have you checked out our recent video on used scooters? kzbin.info/www/bejne/gJXdl3WCaricY68 Most everything covered in this video will apply to any modern Vespa. Hope this helps!

[@hellcat3483]

Good job.

[@VespaMotorsport]

Thanks!

[@ahmadzavar07]

thanks

[@nievesruggiero5373]

The inner part to screw the mirrow broke how can i fix please

[@VespaPortland]

Haha!!! Did not expect that shoutout.

[@VespaMotorsport]

Robot keeps tabs on you guys 😆

[@VespaPortland]

Apparently so do we... 👀

[@akkenavineeth1429]

U have many doubts. Plzz how to contact u

[@akkenavineeth1429]

I have many issue and I can't find anyone near me to repair it.. Plzz can u.. Do any favor to me

[@NoFrictionZone]

I'm about to place an order MR-25IA for my 07 GTS 250, my nuts are deeper into the frame, any ideas? Thank you perfect timing, I was watching the 4 option mirrors video :)

[@VespaMotorsport]

On the older models, you'll have to remove the reservoir covers with the small allen fastener to get a better grip on those mirror nuts. The aftermarket mirrors you're looking at stick up higher than the stock nuts, so you may not need to do that in the future. Enjoy your new mirrors!

[@NoFrictionZone]

@@VespaMotorsport awesome, thank you!

[@golds04]

I have a 2009 250- the bolt- is recessed😢.

[@daanje1062]

Actually experiencing loose mirrors on my Primavera 150 Touring. I tighten the mirrors and they come loose again. Can't take them off unless I remove windscreen either.

[@VespaMotorsport]

In that case, you could probably put a little blue loktite on the threads.

[@cameronhumphries1127]

I'm more interested when its the opposite end of the mirror loose , The end with the actualy mirror, How do we tighten that

[@alhaffar2864]

I have the same problem. Did you solve this?

[@c7uk]

There’s no looking back for the guy that gave a thumbs down

[@VespaMotorsport]

😭