How To Tile A Shower - Start To Finish Walls

[@TheExcellentLaborer]

Hey fellow DIYer's! There is A LOT of information in this video. I placed timestamps below to help you navigate this video. Enjoy! First and most important step 00:17 How to layout for a staggered look 03:16 How to mix thinset 05:27 How to set shower tile 07:23 How to cut tile 10:59 How to use a diamond sponge 14:20 How to make tile shelves 18:51 How to install tile shelves 24:05 How to cut out for the shower valve 27:31 How to remove the leveling system 30:29 How to install mosaic tile 34:09 How to install bullnose tile 36:57 How to drill a hole for the shower head 39:35

[@T.E.P.]

Superb job on this vid and the time stamps are great for all … always informative and energetic vids! Hope your week is starting off strong

[@elifire4147]

Seriously thank you for sharing your knowledge very noble and helpful!

[@mike7357]

You have the best videos for a DIY guy like me, so thank you very much! Timestamp 1:27 shows 11 1/4" but I think it's 11 3/4. It matters when adding the gaps to get the 12" starting line right?

[@lyricalvybz2229]

Which line did you plum for the center is it the original or the sixteen off the center please

[@joshuamendez4189]

This was so helpful! And the way you explained everything made it so easy to understand and encouraged me to do the shower myself. Thank you 🙏🏽

[@jeffreylonigro1382]

I’ve been tiling 30 years and I must say this guy gets it right.

[@TheExcellentLaborer]

I appreciate that Jeffrey! I hope all is well. Take care!

[@sassykassie6070]

My sentiments exactly, was just thinking how much my father would like this guy… is the most excellent Laborer married I wonder? His ring finger says he is, must have a great bonding agent with his wifey. 😊

[@chriscampbell1455]

I’ve been tiling since I started this video so comments like this encourage me that I’m in the right place! Haha

[@chadharrigan68]

The reason for ledger/cleat board is to be able to install pan tile 1st for overlapping purposes to shed water to the drain. Not because pan isn't level. Hopefully he's pouring his own pan not pre-fabbed.

[@seanrichards]

I couldnt agree more! you explain everything to a tee....@@TheExcellentLaborer

[@ralphemerson497]

I’ve must have watched a 100 of tile instruction videos. This was one of the most thorough videos I’ve seen.

[@TheExcellentLaborer]

I take a lot of time to make these videos to keep the details in there. I love helping people. Thanks for watching!

[@archanaseth5575]

@@TheExcellentLaborer You are fantastic. Starting a new house for my kid and this will help me immensely keep an eye on the installer and their work. Wish you were in Phoenix area would have hired you to guide me. Thanks.

[@lennoxauguste3005]

Love your videos very detail keep up the awesome videos

[@kylec.1313]

Can’t be serious dude can’t even read a tape measure read 11 1/4 tile wtf 🤣????

[@LuisLopez-nf8vd]

I think we all agree 🙏🏼

[@greggdupree6191]

I have never done anything like this before. I have gutted my entire bathroom and putting in a tile shower myself. I fill like I have bit off way more than what I should have but don't have to money to pay someone. I'm doing a 3x5x9.5tall with glass doors and bench. I'm watching you like a hawk haha. Couldn't do this without you.

[@TheExcellentLaborer]

It is definitely a big project to do what you were doing. My hat is off to you for tackling such a job. Patience is key. I’m glad I can help you out. I enjoy making these videos to help people. Stay tuned for more!

[@chrischavez6358]

How did it come out ? I’m about to gut my shower and tile my tiny master bathroom shower

[@guesstheguest6320]

Because I am tiling a condo on the fifth floor I had to have a permit and get a pan drain pan installed and inspected.Also, the go board. Pretty excited about just doing the tiling myself. I had somebody plan to do it, but I think I'm going to start tomorrow. I'm watching this as I get ready to go to bed. Thank you so much!!!! Don

[@WJCarpenter]

I'm getting ready to re-tile my bathtub surround. It's my first tile project, so I've watched about 8 million videos about it. I've picked up a lot of tips, but this video is one of the best I've seen for covering the whole process. So much good stuff. Thanks.

[@PatrickPingNg]

Thanks for the detailed demonstration, just one minor thing I observed is the width of the tile is 11 3/4 inch but not 11 1/4 so you install the second row 12 inch above the pan. Great work.

[@seanrichards]

great observation! I am still trying to figure out why he went to 12" if the tile was only 11 .25"

[@SuperSawtooth]

Man I am glad you said this! I must have re-watched that section 20 times trying to figure out how he got to 12"! Thanks!

[@mattadams0690]

@@seanrichards tile is 11 3/4” he just said 1/4 instead of 3/4. He does it at 12” to allow 1/8” gap at the bottom and top of tile for grout.

[@paulboyer6797]

I too could not add 11 1/4 + 1/8 + 1/8 and get 12.

[@obadyahuyasharal4075]

The only issue that I observed in his videos is that he should show people how to measure from the bottom of the sower to top and calculate the width of the tile and spacers to the ceiling to insure that you don’t have small pieces at the top. If you do then you would have to to adjust horizontal start line in order to compensate.

[@techguy909]

The ONLY video that shows me how to start the first row with proper measurement, offset, and technique.

[@dennisammons9176]

I did the same job about 25 yrs ago and as a "rookie" made all the mistakes you talked about. Now my wife wants to redo the shower. That's why I'm watching your video. Thanks for the tips. Dennis "the Rookie"

[@Selinalatour]

I just want to say, after watching your video multiple times, and a few others. I complete my first row of tile last night. Your video was on loop in the background to refer back to. THANK YOU!!! I was a nervous mess. But, it looks great!

[@stevenbarry9983]

This is the best hand step-by-step directions on installing a shower. I’ve been wanting to see from start to finish and kudos to this tile installer best on KZbin.

[@TheExcellentLaborer]

Thanks a lot Steven. I put a lot of time in this video I’m glad you found it helpful. Good luck on your tile project!

[@emilyburnias2830]

You are the best teacher for people who like direct precise instruction .We watched your videos and they are by far the best for the do it yourself person. Bravo young man.👏👏👏

[@infraprods]

Excellent video, just one pointer from a guy who works for one of the major tile setting mortar (ie thinset) manufacturers. Always put the water into your mixing bucket first, then slowly add the powder. You can add more water to adjust consistency if you need to. Most manufacturers will give you the maximum amount of water to add on the bag instructions. Same with grout or any cement based materials. They mix better.

[@smonroe207]

Ok Mr. I work for major thin-set co. Let's see what u really know, whats the difference between gray or white thinset ????

[@seanrichards]

@@smonroe207 so whats the answer?????

[@jtltet]

@@smonroe207, one is white and one is gray.

[@paulmaxwell8851]

@@smonroe207 What's your problem? infraprods gave everyone some very valid advice. You'd be wise to try learning something here rather than be obnoxious.

[@dooleyfan]

Great video. I’ve tiled a shower once before, about 10 years ago, and I’m doing another one now. I wish that your video had been available back then!

[@slayer4501]

I've been using KZbin for about 11 years now and I didn't realize how useful it can be. Thanks for showing us how to do a tile shower, I always prefer a modern tile shower than those gross apartment looking showers that are made of plastic

[@TheExcellentLaborer]

I appreciate that. You are welcome!. KZbin is such a awesome tool to research things before you do them. I’m glad you found the channel helpful. Take care!

[@boricuaarecibo9259]

I'm doing my bathroom right now I demolished I piped in the shower faucet I had to move the drain. I set the shower pan using a tile redi pan . Now I have to tile this is a great video. Thanks wish me luck. I'm a hvac technician so I'm somewhat handy

[@kenwalker1111]

Just finished my first shower with only the help of your channel…what a life saver! Keep up the great work!!

[@sevendigits_777]

I’m a union worker for another trade that I won’t publicly mention lol but helping couple friends with weekend jobs gave me a passion for learning all trades including shower tiles. I’m naturally a homebody so watching this is more therapeutic to me than getting drunk at a bar LOL. Love the quality and value of your videos bro. I’m hard-wired to details too. 👍🏽💯

[@john9982]

Never done tile work before. I'm a banker, very minimal knowledge on tile and grout, but learning. I Have an old stand up plastic shower stall that has seen better days. Want to learn a lot before i try this. Thank you and will watch all your videos.

[@robertcastrojr4679]

Hi my name Robert and I’m in the middle of doing the same thing you’re doing in this video in fact I’m gutting out the entire bathroom all the way to the beams because of mildew issues . I’ve watched all your videos from installing the shower pan to dual rocking and waterproofing I’m amazed and believe me you’ve showed me things I didn’t know . I would like to show you pictures when I start the installation process and I’ll be more then happy to except some pointers. Keep up the good work

[@robind.5542]

I did a tile shower in my previous home. It came out surprisingly nice. I used 6" Tiles and designer tiles with a Teal, almost see through, Glass diamond design about 2/3 of the way up. I am in my 70's now and am seriously giving considering doing a shower here.

[@Penutbutaminingaway123]

I followed your methods and did our shower. I’m a brickmason so I’m pretty good at layout and decorative patterns. The long wall I did a running bond with subway tile and the two end walls I did a herringbone. First time I’ve ever done tile let alone hanging cement board and waterproofing it. Very helpful videos.

[@cobbleitup7030]

It’s been a while since you posted this, but if you’re still curious about anyone who is doing a diy tile shower….well I’m doin it, bro. I’m doin it! First time though so it’s slow going and confidence ran out after I was told “demo” is not a legit interior design and I have to replace everything and can’t keep the toilet in the dining room. It’ll be a bit before I get to the tiling though. I’m just finishing up new insulation and electrical. Your videos are a huge help! I appreciate you!

[@bseely772]

I've tiled before, but never a shower. I'm considering doin the walls and base myself and decide who does the next part. Your videos are awesome! They've helped me on a number of other reno's as well. Thanks for that :)

[@glenlowen7125]

I have never tiled a shower but I plan on doing one that's why I am watching this video. After watching the video I think I can do it, just have to take my time. Excellent video

[@sonyaellis4124]

I'm about to tackle a small shower. Watching this video has helped a lot. I'm sure it has stopped me from making installation mistakes.

[@NancyBartoo]

Lots of great info here. I am going to help my contractor do this project so I know how to do it myself next time! The video was really thorough and answered many questions including why my tiles do not always line up level-bows in the larger tiles. Thanks so much!!!

[@danaxe407]

Halfway throught he video you ask to leave a comment if you have or have not. I have not. We are paying a contractor. No idea what it all entails and after watching half this video I am confident I will never do this myself. Thank you for the great video and major appreciation to those who do this for a living!

[@essi1423]

I am a DIYer and your detailed, step by step videos have been extremely helpful. Especially your explanations on the how and the why for each single step. I am still considered a novice and there are a bunch of little details mentioned in your video that are overlooked in others.

[@ggtaruc2578]

Thanks for the video. I am starting a project to tile my 60x32 shower. This video will help. One suggestion is to dry fit the tiles before applying the thin set. And am glad to mentioned scraping off the thin set above the first row.

[@dougbrittsan-yn9sl]

Thanks for saving me a ton of money. Grandpa used linoleum for shower in 1942 mountain cabin. Worked for 81 years! 30 miles from town. Tile guys wanted $3,000 just for labor.

[@moroniccolonic3959]

You want him to work for beans?

[@dougbrittsan-yn9sl]

Took me 2 days. I’ll do the math for you. $1,500 per day in labor.

[@ksoper1351]

We just got a quote over 4000 labor only for a 32 inch square stall...😢

[@RobertM949]

Great work! Tiling is a bit of an art and it takes someone with patience and who takes pride in their finished work. You have both. If you are watching this video you could hire 10 tile setters and maybe one would be as good as he is.

[@grant7934]

The how-to I've seen. Simple and straightforward.

[@willduncan8296]

One tip, preset your spacers behind the ledger boards and rest the first row in the spacers. That way they will be there for your bottom row. Great work! 👍

[@claybiggs9018]

I've watched videos for two months. You have the most informative videos on KZbin. I'll be starting a 42" x 57" shower this weekend. Oh' God.

[@TheExcellentLaborer]

I’m glad to hear you did your research first Clay! That is half of the battle. That’s going to keep you busy for a while. Let me know how it goes. Thanks for watching!

[@ggtaruc2578]

Thank you for this video. I really like watching it. I have done 2 bathroom floors but not shower wall yet. For the bathroom floor I used the Schluter Ditra membrane which was very easy to work with. I am now planning on doing a 60x30 shower wall above a tub which is why I am watching your video. Not sure what wall board am going to use yet.

[@montanez1able]

I am redoing my bathroom shower after finding a large crack in the tub. I am Definitely saving this video and using it as my guide. Most videos don't explain much but this one makes me feel like I got this. I am more excited than scared to get this done now.

[@tastein314]

I remolded not only my 1st foreclosure house, but I also worked for 5 years for a remodeling company here in S. FL. Some great tips here, and it's a great video. Many DIYs don't realize you need that level piece of wood to make sure there are not obvious slanted lines and also support to the tile on walls till the thin set starts to take hold. Unless it's a new build, many showers have bowed and non-plumbed walls. You walk in a shower and eyes are always drawn to eye level and above. Rarely to a compensation cut at the bottom. Also back buttering is essential. Again, great video!

[@rena321able]

I'm in the comments to try to understand the wood pieces, is that really necessary? Can't I just start at the bottom?

[@trentclark4754]

Square buckets are life savers if you have big jobs to do. If using a round bucket, a circle scoop commonly used with drywall mud is a game changer!!!!

[@mirahgirl01]

God i6 wish I i had your patience and skill! I did my own walk in floor and walls a few yetas ago and it isnt awful but you really make it look easy! Thank you for always taking the time to show the proper process for us less than!

[@busyflyin]

I have done 1 tiled bathtub and I’m getting ready to do a shower. This video is excellent and a great help. Thank you!

[@TheExcellentLaborer]

Good for you! I’m glad to hear your DIY project is going good. Stay tuned for more!

[@Rndy918]

I will be tiling my first shower and after watching the video, I feel really confident. Thank you so much!’

[@darleneclark6098]

Hubby and I did a tub surround and tile floor in our master bath 25 years ago. Although the cuts weren't perfect, those tiles still are perfect. No cracking, lifting, etc. I did regrout and seal everything about 4 years ago in preparation to sell. If done correctly, a tile job could last a lifetime. That house also had an original 1941 black and white tiled bathroom, that I regrouted and is in pristine shape to this day.

[@DonnaShanks]

Tiling the tub / shower today. I needed to understand how to measure and this video helped a great deal. I plan to extend the tile a little bit beyond the shower, so when I measure the spigot wall, my center line will align with the center of the spigots. Great job! Thanks.

[@TheExcellentLaborer]

You are welcome Donna! I know if you have not done tiling before it can seem daunting. With a little guidance most people can do the job themselves. Good luck with your project!

[@MRLAK-sb3mo]

One of the best step by step tutorials that I have seen! Detailed without being boring. I will be doing a full shower like this next week. 12 x 12 staggered with an accent strip. No bullnose- Schluter strips instead.

[@elpelone]

Can you show a picture of the results?

[@wendyduncan9084]

How did it go? We are doing ours this coming weekend. Same strips. I hate bullnose when I have to clean. Did you find this video really helpful?

[@MRLAK-sb3mo]

@@elpelone I would, but I don't think you can on here, I have never seen it done before. Sorry.

[@MRLAK-sb3mo]

@@wendyduncan9084 Spectacular! I had to get this bathroom remodeled for my customer by May 5 for their daughters wedding and I finished it up on April 30. Everyone happy and everyone LOVED IT! The Schluter strips are such a fantastic look over bullnose + my customers tile was not made with bullnose available.

[@wendyduncan9084]

@@MRLAK-sb3mo thank you so much for responding. I’m going to put the time in to really watch this one before I tile this weekend.

[@mikejagd7417]

Great video. Am beginning my 4th shower and use you for "re-fresher" before starting. You might mention to folks that if you use same color grout to finish it is more forgiving for small DIY mistakes.

[@gerryhartung736]

I went thru a 4 yr apprenticeship to be a journeyman tile setter. 1970s. Back then we used string to space horizontal, eye and measuring vertical. All tile surface was adhered with pure cement, on sand, cement and lime plaster on walls and ceilings, that we floated ourselves to true up all surfaces. Used black rubber pails to mix in. All tile was soaked in square laundry tub that also doubled as a wet lube for tile saw.

[@stepbackandthink]

A 4 year apprenticeship for a job that takes 6 months to learn is just exploitation.

[@Vizzi12]

Sounds tedious, with all the convenience of tools and material development it’s no wonder the learning curve has dropped dramatically.

[@dragonrider9051]

​@@Vizzi12tile work in the 70s still standing strong, tile done in the last 20 years, falling apart. So pick your battle's I guess.

[@Vizzi12]

@@dragonrider9051 that’s not a product of installation many times, that’s a product of material quality.

[@AndrewCantonTV]

@@dragonrider9051 you not lying. The old school guys were better at building things. Nowadays it's just about cutting corners getting paid and dipping

[@cmac6992]

You ex0lain things very clearly! My husband and I are in the process of tiling a shower with a bench.

[@jeffkezerian4169]

Your vides are so clear and are explained in a way infully understand and barely have to rewind! I have a question abiut the board yiu located at 12" drom the base. With a 11-1/4" tile and a 1/8" gap to the base and a 1/8" spaxe up top, that is 11-1/2" total. Why did you make line at 12", which is 1/2" higher? Thank you!

[@Srone79]

This had me thinking as well. In the video @ 1:27 mark you can see he measures 11 3/4 and not 11 1/4. It makes sense with 11 3/4 with the extra 1/4 added for the spacers.

[@tazz1629]

I haven't ever done a shower before but your video is just what I was looking for from start to finish Thank You for being very precise

[@rcobett7661]

So glad I spent the time to watch your video’s. I am doing a DIY shower. Scared to death but these have made it not seem so impossible. Wish me luck and throw a prayer my way 😅

[@haroldsaalfeld7199]

Fantastic video for the DIY. Clear, simple, concise. Get the wisdom only a pro can give you!

[@TheExcellentLaborer]

I appreciate that Harold!

[@royalblueconstruction]

I like your presentation, you’ve done a good job on that end. I started out watching KZbin, self taught myself everything. I’m now building curbless showers and doing my own KZbin videos. Won a few awards and have around 4500 followers on Instagram. Keep grinding brother. I think you’ll want to toss that 1/4” and get yourself a 1/2” notch trowel for LFT. The best thing I started doing was keeping my hands clean by wearing gloves, keeping my tiles and grout lines clean with a sponge and keeping my tools clean. We all know the work it takes to clean off dried thinset. Good work 💪🏻🔥

[@YT-User1013]

Why 1/2” instead of 1/4”? Won’t that leave too much mortar?

[@mattcampbell3120]

So glad I found this video. Going to rewatch this video again but I will be doing my shower soon. I really wish I found this leveling system before I did my floor! I didn’t do too bad but this would have made it so much easier!!!

[@Livefreeordie87]

This video was my go to for renovating a space for a tiled shower. This step by step breakdown was easy to follow for a first timer, thank you!

[@coltond5232]

Well crap. Now that you've done such a great instructional video I feel obligated to do that project I've been thinking about for the past couple years. I haven't attempted tiling my shower yet due to no being familiar with how to setup the shower pan. You can bet I'll be saving this video for future reference. Thanks for the awesome content.

[@TheExcellentLaborer]

I enjoy doing tile showers. It’s rewarding when it’s all said and done. It’s definitely a lot of work. I appreciate your kind words Colton!

[@laurentmartel539]

My man !! Im doing mine in a couple of weeks. Tiling the shower bathroom floor and laundry room floor as well 👍🏼.

[@richmackey2623]

I plan on tiling my shower this month. Your video has given me some great things to watch out for. the correct appoach to tiling the shower

[@patrickarchuleta5359]

your work is second to none may god continue to bless you and your family. bottom line

[@TheExcellentLaborer]

You just made my day Patrick. I really appreciate that. I know I am far from perfect but I try my best. Thank you for watching my channel!

[@louv9487]

Your videos are amazing! I can’t tell you how many I have seen throughout the years and never seem to find someone provide step by step details. I feel ready to redo my bathroom!! Thanks

[@TheExcellentLaborer]

I appreciate that. I try to keep my videos as thorough as possible. I know it’s hard to cover every situation but I try to cover the most common ones. I thank you for watching!

[@bobbob2790]

This is exactly what I have been searching for. Thank you bro. All the other videos I have wasted time on didn’t explain going around the corners at least the ones I’ve watched. 👏🏿🙏🏿

[@thomasfoster5200]

I am not a "TILE LAYER" but I've done a few jobs. I never use a leveling system I've never even laid out lines on the wall like you did. I admire your work and I've learned from it and I agree some times tile can be warped Like a 2x4 from Menards. It's a dirty job its messy but I have never had any complaints. Especially when I'm working on my own house Hmmmmmmm.

[@Byebyerain]

Great explanations, my wife and I have been talking about changing the tile in our shower. I think I can do it with your instructions. Thanks

[@billb5060]

Of all the tiling videos I've seen this is the most extensive - Thanks! I read through all the comments to get a question answered and it must be annoying for a dozen people asking the same question about 11-1/4 vs. 11-3/4! I wondered also, but was clear by just reading comments. I also have watched your videos about installing, taping and waterproofing the cement board. But my question is about where the tiles meet the ceiling and concerns about water penetration. In your taping video I didn't see what you did there. Use Fibatape in corner between wall to ceiling? Thinset on the fibatape on shower wall and sheetrock spackling on the same Fibatape on ceiling? I am not sure the best way to do this to have to let no water get behind but to still be able to finish/paint ceiling. Again, thank you for the video and in advance for this answer!

[@valeriejameson6816]

Speechless, What an amazing work !!! I took notes from the beginning until the end. Thank you so so much.

[@johncorbin5332]

I really like how you made shelves from the tiles instead of using store bought plastic shelves

[@claudiapayton5862]

I’m using the same quartz from the vanity tops for the shelves and the niche.

[@walii777]

I've never done any tiling before and have always wondered if I can do one. You make it look easy.

[@thehound1359]

You can. As long as you take you’re time, you’ll be fine.

[@mrklasen]

I started gutting the master bath and I'm strongly considering pulling the old fiberglass shower and laying some tile! Thank you for the detailed and informative video! Liked and subscribed!

[@roadrunnerklassic7262]

Best video I've seen on shower tile install- straight forward and common sense approach. I'm halfway through my job and was having a hard time with getting started on the tile. This is great! Thanks for sharing.

[@annieharmer1636]

Watching this for a friend and currently tiling the floors of an entire house. Great video

[@saiyanwarrior828]

It’s best to use a half inch by half inch notched trowel on tile the size specifically because of the way it suctions the tile to the wall better. Also clean the thinset off the face of the tile and off the edges of the tile with a margin trowel in sponge as you go itll make grouting so much easier and just the entire process in general.

[@ch1959]

You're absolutely right. The only trouble is that it makes a big gap on the edges. The schluter tile trim won't be against the wall with that much thinset behind the tiles.

[@saiyanwarrior828]

@@ch1959 well you can either use a jolly strip on the edges instead of bull nose to mitigate that or you can put grout caulk on the edge of the bullnose tiles. I’ve never ever had a problem with it sticking out too far. Also i just realized I don’t think he did the water proofing.

[@davidharrison3074]

I have always enjoyed doing tile and coming up with unique looks. The time is rewarding for sure for me and the home owner. Using mosaic tiles is a great way to do accent borders in many ways. I had one job I used one that had some glass 1 inch square pieces that I actually used on the by 12 tiles and I clipped the corners periodically when I did a job floor to ceiling. Then I continued the decorative mosaic border around the mirror that was recessed in the tile as well. It was a very rewarding job at the end and very well loved by the customer and friend of mine. I love using both styles of wet saws depending on the jobs. Putting the board across at the beginning and the same as your border section is always a plus. Fantastic job Josh, and wonderful choice of colors.

[@TheExcellentLaborer]

My wife picked out the colors. I was just the installer 😃. I’ll let you know you liked the colors. Sounds like a beautiful project you did! It’s very satisfying to look at a tile job when you are finished. Like always, thanks for watching and commenting David!

[@bwiseok]

We are going to try setting our own tiles. This is valuable information

[@TheExcellentLaborer]

It is really good information if you have not done tile before. Take your time and it should turn out just fine. Good luck with your tile project!

[@farmthestars3962]

Doing a tile shower tomorrow, learning from your video tonight

[@LynnWhite-h7t]

I'm doing one now getting ready to tackle it that's why I'm watching these videos hopefully I can learn

[@v-dub1317]

Your demos and explanations are excellent. Thank you for the information. I have been putting off completing our shower due to fear of the process. These videos have simplified it for me.

[@Huhiwonder]

This guy…wow! I’m about to do a shower and he is incredible! I have the same tools he has, but I can’t keep anything as clean as he does. Great video!

[@Haleysjeep]

I’m doing my bathrooms now. Already demo’s 1. Thank you for this beginner vid.

[@josephcarney9634]

I forgot to tell you , excellent job on the whole project, i,ll be watching you more than the others, thanks again, Joe

[@jeanettecrabb1713]

I've tiled many showers. This is a very good tutorial.

[@philipf78]

Thank you so much for your video. I just did my first every tile floor in the bathroom, tomorrow I am going to attempt a mosaic shower floor and next week the shower walls. Should be fun 🙂

[@alb6804]

I am doing mine now. Found out water was getting behind the existing tile so I have mold back there. Lots of fun going on this weekend.

[@upscale22]

Ah ha, so that's what you do! (Tile shelves). I was wonder why all the shower video's of yours I've seen didn't have a niche made! Definitely doing this for my next bathroom, thank you

[@ryanmcneil9471]

Absolutely fantastic videos my guy. This really helped me from start to finish. I love how you explain things very thoroughly because sometimes there is little steps you might miss or not think about, like the trimming of the cement board at the flanges.

[@ryananderson2378]

He never explained how to replace the empty Wedi sausage caulk tube system.

[@anothermike6140]

A lot of good info and detail. I've done 25 to 30 bathrooms over a 35 year period but nothing in the past 6-7 years. Seems there is bunch stuff I'm not familiar with, never had, or maybe never needed. Great video though, got me to subscribe.

[@paulvonrentzell5189]

Well done. Doing this step in two days. Kerdi wrap and sloped floor pan are installed need to add sill yet and corner kerdi wrap today. Thanks for a fantastic video

[@clint330]

yes, this was a great video tutorial, thanks so much! i'm converting my master bath from tub and shower stall to a full walk in shower! excited!

[@derrickjohnson9333]

Yes, have tiled many showers. It’s detailed work and takes experience. Not a typical DIY project, very few can pull it off-most cannot. Thx to Covid, many people had lots of time to do home projects. I saw many DIY shower jobs when assisting my daughter along her 1st home search. What did I look at first? The showers and other tile jobs. Most were horribly done and all I saw was “lipstick on a pig” with potential major shower failures. Those houses we passed on. 1/2” tile gaps, sloppy installs and just bad craftsmanship. One other horrible fad is the “adhesive” tape on the wall for backsplashes. It may look good for a short time but fly paper for tile is just a bad method. Use Mastic or thin set based on application and moisture conditions. Nice video.

[@jeraldcisneros6946]

💯 agree with everything you mentioned. Especially "Not your typical Dyi project." I have a tile business in south Texas and like you have seen so many failed projects. We can both probably nit pick this video but its actually one the best detailed videos I've ever seen.

[@M4rty_McFly]

Just finished my heated tile floor. I should start the shower next month. Only have a manual tile cutter so i might have to rent one like yours to make sure all my cuts are perfectly straight.

[@jamesd4503]

I think he did 12 x 24 tile is probably 11 3/4 not 11 1/4 !

[@docness7]

Definitely redoing my shower when I get back to FL.

[@Therulerof72]

Great video. Did I miss something near the beginning? Tile is 11 1/4". Leave 1/8" gap at top and bottom. Mark a line at 12"? Shouldn't that be marked at 11 1/2" off the shower pan? Thanks.

[@douglas3103]

I was about to post the same question... Do people still not realize the most important step?

[@WonderboyWDE]

I was always taught, and still do this and see just about everyone I know, to add a little water to your mix bucket first. Then add your powder, then more water. That way you don’t a dry bottom and won’t have unmixed powder when you pour into your mud pan.

[@healthybusyus]

I'd say if you are DIYing it is a must to use a tile leveling system since you don't tile often. You probably didn't want to say it since you are sharing a link but I'll say it for you. Great video!

[@ggtaruc2578]

What is a tile leveling system?

[@wasntme3651]

Actually if you get a quality tile cutter it cuts porcelain just fine. Been doing tile for twenty years. That being said I do use a wet saw the majority of the time. Also the job looks better if you use schluter on your exposed edges. You definitely do nice work for a guy that dabbles in everything. Nothing worse than warped tile, especially 12x24 on a split running bond pattern. Those leveling systems are a game changer for sure. It takes time and plenty of experience with some patience to set without them to get a quality job. If your doing a job like this without the leveling system then use a level and rubber mallet to make sure your tiles are flat. It’s a little more tedious but perfection is the name of the game. Another nice little trick for you accent tile is set it to the kerdi band the day before and then just set it in three pieces. That way you Don’t have to worry thin set oozing through. I learned that little trick from Sal Dablasi on his KZbin channel. He’s a tile guru. Edit, I didn’t know you had a bullnose to finish edge when I mentioned the schluter.

[@keithwatson4707]

Yep, done 2 and about to do another. Always have to review before each one since they are years apart.

[@Mr.Clean69420]

This was such a blessing and an exact example and replica of a shower that i have been wanting to do for some time now!! The job came out so visually pleasing and set up a perfect guide for when i go to install my diy shower!!!

[@sandymilne224]

Super detailed video that covers most everything needed to get the job done.

[@TheExcellentLaborer]

Thanks Sandy. I know the more details the better. I appreciate you watching!

[@sandymilne224]

@@TheExcellentLaborer : Just about to start a project and the part about layout I’m finding particularly helpful. If aluminum edges were used instead of bullnose tiles, do those get installed at layout time, or slid in place while thinset is still wet? Also, how do you finish the bottom tile where it joins the shower pan? Grout or silicone caulking?

[@terrymanning9414]

Great step by step demonstration! Appreciate your explanation of the process, including the watch outs. Extremely helpful.

[@50thstateofmind37]

Bucket of water and a sponge to clean thinset off tile. And I use a paint brush for joints instead of a pencil. Good video.

[@smukut]

You’re very good with explaining the details involved! Thanks, you’ll be my reference study👍