How to transfer an inkjet photo to wood

Download my FREE GUIDE to setting up a shop for under $1000 ►► mytoollist.com/
I've had a lot of requests asking me to elaborate on my inkjet to wood photo transfer technique. There is not a lot to the process, but this should help.
----------------
Equip your woodworking shop for under $1,000: theweekendwood...
PATREON ► / wwmm
INSTAGRAM► / steveramsey_wwmm
----------------
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. #237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodworking #powertools #WWMM
Category
Howto & Style
----------------
Music from Jason Shaw at audionautix.com/

[@oqsy]

Quick tip, you can wipe the label paper’s shiny side with a little denatired alcohol on a soft cloth and REUSE the same sheet to print another transfer!

[@reuse_or_die]

Thanks that's the question I was about to pose 😊

[@oqsy]

Under 2 mins, all the relevant info, no ads or rambling. Great job, now convince all the other ppl on youtube to follow this formula! 😆👍

[@skakdosmer]

Finally a tutorial video where I didn't fall asleep half way through, and where I don't feel talked to, like I'm a fool or a baby. A video that clearly, quickly and crisply gives all the relevant information. Thanks!

[@BigManko]

Hey Steve! I have a really cool tip for you. Don't use shipping-labels, use an OHP-transparency for a Laser-Printer. After you transferred your image, simply wipe the transparency clean with some alcohol!

[@davidbothof1077]

Steve, I must commend you on such an awesome video. Not just because the idea is awesome, but because you got right to the point, only talked about info that was necessary, and though the video was edited to keep it as short as possible, it contained every detail necessary to successfully DIY. We are so used to 15 minute KZbin videos that could very well have been 1:30, that to see a video like this is a breath of fresh air.

[@briansmobile1]

David Bothof Great observation David. I'm afraid I've been making 15 minute videos and am guilty of under editing. I would like to apply what Steve does. It IS a breath of fresh air.

[@carloslandaverde6475]

And if you watch it 1.25x it is shorter and same info!

[@jbonaful]

This should be industry standard for tutorials! Love it!

[@davycrockett4395]

Love the fact you didn't turn this into a 15 min video you hit all the important points explaining everything perfectly 👏

[@melyann81]

FINALLY a video that works with inkjet. I been so busy trying to try ways others show and wasting my paper, ink & board canvas and this whole time it was just this easy 😒 Thank you for this. It finally worked ❤️

[@servus_incognitus]

Did it work as intended? I'm asking around looking for people to print for me, but everyone's afraid it'll ruin their printer somehow.

[@melyann81]

@@servus_incognitus it didn't mess up my printer. It's a give or take when I press it against wood canvas. Sometimes it comes out great othertimes it's alittle smudged.

[@janabloomfield4151]

Well this is an oldie, but a goodie! I don’t need a laser printer or 25 steps! Simple and straightforward! Thank you!!

[@BadlandsWoodNStuff]

Works great for branding too. I do my editing in word, and then print it. Yes, Summers Woodworking it does work with wax paper too. To solve the feeding problems I tape the wax paper to a regular sheet and it works great. Thanks for sharing Steve

[@hansdegroot8549]

I came to this video only now, more than 6 years after you released it, because you put a link to it in your yesterday's video . Thanks for leaving your old videos here! This technique works also for prints from a laser printer. I tried that out, already a few years ago after watching another video on the same topic. The wood needs to be sanded very smoothly for the best result. I didn't try coloured prints because I don't have a colour laser printer (yet) Before I had an colour inkjet printer but that was not very economic. I hardly used the coloured ink but I had to change them all the time because otherwise it wasn't able to print black.

[@JeffRichtman]

The fact you did a Dr. Who image proves I was right in subscribing to your channel. LOL. Great video as always Steve.

[@al6600]

this is very cool better than the hodge podge version, by the way your video is a great example of how to make a how to video on youtube video, quick to the point only see what we need to well done.

[@al6600]

i mean mod podge

[@VioletJoy]

Pros: Clear, concise, straight to the point info! 👍 Cons: When you ripped off the new labels, I died a little inside. 😳

[@jojo-l7431]

Thank you Less then 2:00 minute long video straight to the point👍🏾👍🏾. I’m sorry but some folks just DRagggggggg on in on about completely NOTHING.

[@LuciaEsG]

Tried it today, it worked so well, thanks Steve. I printed some veggies illustrations and put them on my chopping board then I protected with food safe varnish

[@arabicsongssubtitledlyrics2663]

Welcome Lucia Este, Could you tell me the name of that paper ?

[@perryphillipsmusic]

Best video hands down! Straight to the point and I cannot believe you posted this 10 years ago!! LOL.. Way before the DIY craze!! Thanks!

[@thiswoodwork]

Really cool, I will HAVE to use this at some point!

[@karengsy2008]

ThisWoodwork v*

[@jonpalange3292]

Steve, this is fantastic. Ever think about using this technique to fake elaborate wood grain on otherwise cheap or unimpressive lumber? Thank you again for another game changing upload. You've inspired me many times in the last year or so in my own growing wood shop. I owe my love of pallet wood to you sir.

[@DinJaevel]

I know I'm late, but you using the Eleventh and Amy, making a dice box, ouija board and so many other nerdy things makes this channel golden! Since I first found you I have learned so much wood working and want to keep on learning. Keep up the good work and thank you!

[@gremlinsbreath]

So many ideas are coming to mind. I finally have a use for the address labels that have been sitting in my filing cabinet for twelve years or so. Thanks.

[@woodandwheelz]

I haven't tried it yet but, I've seen someone use Freezer Paper instead of label paper. You still do exactly as you said, you print on the shiney side. Thank you for your video on this, I've used it several times with great results every time.

[@johnnew3182]

Hey Steve I found that simple wax paper works just as well! It is a little harder to get in the printer unless you tape the wax paper to a regular sheet of paper first to give the whole thing rigidity to be able to place it in the printer slot.

[@reuse_or_die]

Thanks that's a great idea I'm going to try it. It's a shame to waste labels

[@BobHaws2]

I just tried this last night based on your video with the tool box where you did this. It works awesomely.

[@emmmuck]

Finally a precious video that not gonna repeat video title again and again. And give info straight up

[@ozmid40scouple]

That is the most straightforward concise DIY guide I have seen on youtube!

[@rodjoo]

Why on earth didn't I stumble upon this earlier!? It's like 9000 times easier than any other method.. thanks for sharing!!

[@geoffpedder]

wow, i've been trying to make transfers onto wood easier and you just saved me so much hassle! works a treat thanks!!

[@zoesterjoy]

Thanks SO much for this. I've been struggling with other techniques which were not working. If anyone out there is looking around, don't bother with either the ironing or the laser printer/acetone approaches.

[@tireguy9755]

I love your videos! I've been a subscriber to your channel for a long time and actually made one of your projects in my wood shop class while I was waiting to get supplies for my main project. I actually later ended up selling it to one of my friends to give to their parents for Christmas

[@Rutce125]

Wood worker and a Dr. Who fan = my mind blown! You're awesome Steve!

[@speura1]

I didn't have the label sheets, so I tried regular wax paper. Cut off a piece, taped it over a sheet of paper (so I had 8 1/2 by 11) and ran it through the printer. Worked well.

[@beargun42]

A friend of mine tried it with parchment paper, and that worked fine too.

[@matthewdrummond1340]

I am so glad I came across your video. I've wanted to use inkjet for years. Thank you so much.

[@karenrice9349]

I just used this method yesterday to finish up some Christmas gifts and it worked out so well! Thanks so much for the video! I'm so excited. :-D

[@crazy_dreamer7616]

Thanks a lot for this smart solution for all people that don't have a laserprinter! Greetings from Germany, Robert

[@edki78]

Worked ABSOLUTELY perfectly - fast, easy, and beautiful

[@lloydspro76]

Is quick and easy as it gets. thanks. so many other techniques out there seem so complicated and lengthy and multiple steps but this is like a piece of cake. well done sir

[@mdurwin]

Way back in my art school days I did work with high gloss paper and inkjet. The ink would pool and spread. Inkjet ink does dry but it take a few days. I’ve done transfers with it, the best trick for transfer is to actually tape the paper down, ink side up, then place the wood, which, being less floppy, is easier to handle.

[@scottkenyonteaching]

just had a really good thought for my daughters door sign as i cant draw and transfers are expensive this will do this trick! thanks Steve!!

[@mackss1]

I love that you are a DW fan too! Loving your tutorials!

[@finnthorn6291]

Love simple techniques that work this good.

[@markhancock6152]

I think this is the best video ever. I'm easily pleased i know but wow!

[@KuHwkFan]

Don't know if anyone has mentioned this but I just tried freezer paper and it worked perfectly. Just print onto the shiny side. You can also iron fabric to the shiny side of the paper and run it through the printer. So this brings me to wonder if I can transfer a printout onto a T-Shirt LOL. There is a product called "ink jet set" that you spray onto the fabric over the ink and that protects it from moisture and running.

[@GabbiLizabeth]

I'm subscribing!! This is first video I've seen by you and It is awesome for many reasons 1 it's short and simple not dragged out into a long speech but still gives enough details 2 it's an awesome idea anyone can easily do and 3 your a whovian!!!!

[@sethwell]

Genius!! I have some ideas for making some of these of my niece for my brother and our parents! Great idea!!

[@SvartaSnuten]

Oh my Lord, Steve thank you! You are my hero!! I am so going to use this on my custom cider bottle box.

[@adrianmoore5431]

I was thinking of making a Steve Ramsey themed box but didn't think the world was ready for that yet ! Great method though Steve !

[@pyrobryan]

Very cool, and you used Doctor Who to make it even that much better!

[@yemarican]

Maaaan .... you're THE BEST! short tutorial but VERY helpful. Thank you.

[@athiker7209]

Steve's that's the neatest thing since sliced bread. I found an image for a Handcrafted by branding iron. I cloned out the owners name then added mine. It worked pretty well. For small print items, it's not the best but it helps if the surface is really smooth and in my case, I had already painted the surface white. Thanks for sharing. Most should be able to do this procedure on future projects.

[@The-Entelechy]

Looks amazing after the lacquer

[@tfraiseo]

Awesome choice of photos to transfer! This is really neat. Thanks for all you do Steve.

[@Randomperson690]

Fast, informational, and good energy! Thank you, this is interesting...

[@AngieWilliamsDesigns]

Cool. I've seen tutorials on the laser printers but not the inkjets.. which is what I have. So this is useful. AND... I have a box of labels that I've had forever. I tried to use them and theyve lost their stickiness. So this is a great way to use them. Glad I didn't throw them away.

[@alanwebster3942]

See never throw anything away.

[@sly1968si]

This is a great tip...... Now what can I use it on?

[@artsmith103]

Just discovering these ideas to decorate a cabinet I want to build. Great explanation!

[@dvo1919]

It's official: I love your channel. Brilliant stuff!

[@michaellamirata]

I freaking love it! Time to make the shop a bit more visually interesting!

[@chaitanyakrishnan]

love it! have tried it with mixed results.. guess i need more practice. thanks for sharing!

[@begolaman3365]

Thank you!!! This method is the only one that worked for me!😊

[@ifelthope100]

WOW! Worked great! Thank you!

[@Muscleduck]

Nice video, thanks. Just straight to the point and no BS. Great!

[@michaelsilva4162]

I will try this out soon... I really dig the Dr. Who print!

[@jorowi]

Great idea for a simple project you can do with your kids.

[@SteveMcClure1]

That's an awesome Idea!!! I love it!

[@shaunsaggers]

I'm 100% onboard. thanks for sharing this!

[@prasannabanwat]

Tried it last week.. Transferred Batman's logo onto my project! Loved it!

[@everythingforsale]

love the idea

[@briansmobile1]

I really like your style! I make videos on things that are complex and I try to make them simple and easy to understand. You're great at that. How much footage was this condensed from?

[@eddyoddrod]

That was incredible! Thanks for that simple process.

[@TheChrisPineWorkshop]

Love this! So many ideas!! Thanks for sharing this with us!

[@pedrovanius2025]

Técnica de decupagem !! 👍🏻

[@nebulouz1]

Nice presentation and concise information that is easy to follow.

[@briandyck4637]

Great picture to use as an example.

[@goodenoughcraftsandproject7921]

Great video, quick and to the point. This was really easy to do.

[@CraigHoward]

That is the coolest thing I've ever seen! Well done sir!

[@palindrome414]

I really liked Amy Pond. Awesome quick tip!

[@DIYMAN]

Great video. Im going to try this!

[@STEVEBLACKA]

Great technique Steve thanks

[@STEVEBLACKA]

Just a thought is the wax paper reusable after the process? Steve

[@effincook4176]

well, well, well... if THIS isn't the EXACT thing I have been looking for... 6 years belated thanks.

[@janicefoulkes4176]

Hi Steve. Really love this video. When I print it, it comes all globby, lol. I am printing on the right side. Any suggestions?

[@ashwee4257]

Amazing! Thank you since I have a ink net. I wouldn’t have known

[@thx4noticingme]

Thank You!!! This is going to make my life so much easier!

[@Toolsinaction]

Wow that is awesome

[@charlier1977]

Awesome my wife was trying to do this the other day with a different technique. Also nice pic to show. 11 and Amy

[@The52malloch]

Awesome trick, can't wait to try this! Thanks Steve!

[@432HzUSA]

Insanely good!!! Thank you

[@zombiesbyte331]

Wow - that was great, did not know you could do that! Thanks

[@dreamlookautodetailingauto3353]

Pretty cool! Gonna try that. Excited...Thanks for sharing 👍 😎

[@ajustice007]

Thank you so much for this wonderful idea. Can't wait to try it.

[@JoeLMorin-jo3kz]

Great results!

[@michebre]

Great Steve. Thanks so much.

[@davidpercival2033]

Thanks Steve easy quick and to the point what more do we need👍

[@nurettinercikti]

Thanks Steve, I'm looking to use this at one of our projects :)

[@thetopicala]

That was really interesting and i'll give a try for sure. Thanks for sharing this.

[@BriT6245]

That's cool - i like the vintage look of it. Be great on a home made cigar box style guitar.

[@ediblebydesign]

Great demo !!! Thanks so much for!❤

[@RafikMankariosDrumStudio]

Just awsome! Trying this today! Yes, I'm 10 years late! 🤣

[@PinoyMusicRevolution]

Thanks! Ive watched videos that says you can't do it using Inkjet Printer.

[@ColinTonkasdad]

superb idea thanks gonna try that ...

[@SteveFrenchWoodNStuff]

Pretty darned awesome, Steve!