How to troubleshoot a Contactor

[@kennydieu2694]

Thanks for sharing .

[@masonwang1495]

ultrasun 4000 to canopy lamps flicker and when I touch non flickering lamps and ground my knee to the bed, they start to flicker, I ran a ground from the canopy chassis to the buck booster box , it improved but did not go away, the lamps in them are red light therapy not UV

[@thekaduu]

Sine or sinusoid or sinusoial curve. Sinus curve is probably something that would be in your sinuses. However, you are right if you were not in US.

[@samsaiad4838]

What to check if contactor on conveyor is not energizing I have checked everything include replace the contactor but still conveyor won't start and not engage the contactor if press it starts but doesn't engage when press start button

[@claytonopie8462]

I have three right voltage to my contactor wen I manually push it down is sends the right volts threw but bed will not come on or fans any ideas

[@sagarcobalt2661]

What will happen to the motor or overload relay if we change the contractor from 16c to 18c.

[@janitourmeneta2952]

your prove are in series and your reading are in volts how come?

[@roytan7962]

janito urmeneta because the contactor's contact is break or open circuit, after he use the volt meter to do the measure to the contact and his meter is in series with the lighting circuit, it form a close circuit.👽

[@tiberio135]

Sorry dude, your explanation is too convoluted and difficult to follow.

[@imabosnian]

It was pretty simple to me, if you don't understand some of the terms look them up. this is basic electronics

[@fatman957]

he is all over the place 🤣