How to Troubleshoot a Kinetico Water Softener (Basic Hand Tools Only)

[@searchingfortruth8793]

This is a great video, and wonderful explanation. Makes repairing my Kinetico Water Softener so easy. Thank you kindly for taking the time to record these videos. I feel the same.... that the companies should not keep the repair information under lock and key. I would be totally shut down, if I was not able to do my own repairs on my unit, because the closest dealer is 150 miles away. Again, thank you so kindly and may God richly bless you for your thoughtfulness, kindness, and truth!

[@yazzman1438]

Kasey, I just stumbled onto this video today after working on my K5 unit. My Kinetico softener unit has not been cycling for months and I simply by-passed the unit until I could take it to my dealer (saving the $85.00 on in-home service). Your video has renewed my confidence to troubleshoot this unit myself. Thank you for your series of videos on Kinetico units. I will watch them all before I continue with my repair.

[@alfpiccolo]

thank you for posting this video. it helps to trouble shoot my Kinetico softener. I recently experience that the flash cycle stuck for days. my local water agency notify me on my unusual water usage, which prompted me to check.

[@armandodiaz67]

Thank you. You are correct Kinetico should supply more technical info on their units, especially since their local "experts" have such poor customer service.

[@carrolljenkins5650]

Thank you for taking time to make this video. It has saved me a ton of money in service costs

[@pamt688]

Hi Kasey. I also want to thank you for providing this valuable information for those of us who are not in a position to pay exorbitant plumber fees for simple fixes. I determined that the wheel is engaging, but I need to know for step 2 if there should be sound coming from the tank and a trickling of water through the hose when I move the wheel to check the valve pressure. When I try to undo the valve, water sprays everywhere. Thank you for your help!!

[@HostKasey]

If you don't make the future videos my village will go without clean water

[@thenukerunner4906]

Love your videos, very helpful! Would love to see a video explaining more of what happens inside the tanks, including the salt tank (where the dry salt pellets are). The salt tank has a hose, is it a bidirectional flow sending fresh water in and then pulling salt water out (to the tanks or drain?)? What is the little container inside the salt tank, what happens with that in the process, does water stay in the small container or in the main salt tank, etc.? I would love a video with details about these things. Thank you!

[@krismckenzie7037]

Just bought a house with a Kinetico water softener. This is definitely a help in getting it up and running

[@roberttwardy5474]

Exactly the series of videos I was looking for to understand my water softener unit. Thank you!

[@jimw.5809]

Thanks for the Video. My Kinetico doesn't always shut down completely, water seems to keep running continuously but it's just a trickle. To correct this, I turn the screw to start a new cycle.

[@jpdunn42]

Any solution to this problem? Thanks

[@mollyvyzral8484]

Thank you for the video- it's the most helpful info I've come across thus far. Did you happen to make a video in the scenario where the vacuum sprays water during regeneration? Also, once I completed all of the steps- my brine tank filled about halfway with water. I am running a full regeneration cycle now to try and correct the issue. A little back info-- I moved into my house in April of this year. The unit functioned flawlessly until one day it stopped. Called Kinetico and they wanted $250 for the service fee before any repairs and $6K for a new unit. After finding out it was a 20 year old unit, I didn't want to invest much into it. I have been researching other brands for a few months, but I really love the dechlorination aspect of my unit that is hard to find in other brands. My gut has been telling me all along that this is just a simple fix and a new unit isn't necessary. I'd be happy to pay for a facetime consult if you feel this is something that could be helped over the phone. Thanks! **edit to add: it uses the salt but does not produce soft water (since August). Water leaked during the regeneration when I unscrewed the bolt- once the water stopped the suction was weak. Now the brine tank is full of water and the salt is no longer in rock formation

[@parmpanesar3460]

This is extremely helpful. I was going to get an engineer in to service the head but I have suction so the problem is the float valve beingʻ blocked

[@GTEMGULIK]

Awesome video; very informative by the time we finished going through the test we had a true understanding on how the unit worked.

[@proclaimliberty2000]

I have a Kinetico K60 twin tank. The metering disk turns like it’s suppose to and when it regenerates it goes through the brine, rinse and backwash just fine. However, why would it take two hours to regenerate?

[@markgallagher5886]

Thanks for making the video. My unit gets stuck in the drain mode abd just runs up a massive water bill. Any suggestions, ant get an engineer fir love nor money. Any suggestions?

[@billbethel8375]

Mine too ! Help

[@redasharobim736]

Thank you for the video very helpful! I knew that I had a problem with the system when I received my water bill. The system was running or flashing non stop until I put it on the yellow bypass....my question is when I re-set the regenration does it have to be on the green on position?

[@NoKoolaidFourMe]

Can you answer the questions about the regeneration tube drain continuing to drip after cycling? Is it a seal or broken valve? Any trouble shooting around this problem would be valuable.

[@codylujan]

They aren't supposed to drip after cycling if its a basic softening unit. Most likely a bad o-ring or piston ring inside the head. call kinetico and have a tech come out.

[@williambryan2804]

Hi. Nice clear explanation of how the system works. I have a question for you concerning the brine hose. My system has the vacuum during the brine/rinse portion. The rest of the time there is pressure in the brine hose. This includes when the system has completed the regeneration. Should there still be pressure in the brine hose when the system is done? Finally, are all of the systems the same as far as replacement part such as pistons, seals, cones, etc.? I have an older system. I bought it around 1995 and it has never been worked on. Thank you sir!

[@Wurmfist]

You can also watch the black dot move away from the manual rotation tab as a good indicator to it metering. My k60 is just constantly draining to waste - service can't get out for almost half a month, so I'm going to go see your other videos if you have something on that.

[@garywing4964]

Hello Kasey, Thanks for taking the time to show us home owners how to work on our Kinetico System. I have a system that is now over 10 years old and I have both a water softener and an Iron Filter. My system right now is not working correctly as it is no longer using any salt. While I was at work last week my system put a tremendous amount of water into my pond which is where I have all the brine drain into. So it seems that it was stuck in that position on the water softener. I have watched a couple of your videos today and found it very helpful as to what I should do next. I am hoping that I have a clog in my water softener head somewhere. If not, what would be my next step? Can I actually change the media as I am thinking that my media is saturated with Iron and Manganese. Any suggestions you may have would be very helpful. If I can change the media, where can I source it at? Thanks, Gary

[@mpreyss]

Your first step is to verify the head is properly metering. What if it isn’t? I ran water for several minutes and couldn’t see the disc turning. But I can force it to a regeneration cycle and it will step through the stages on its own. Can you do a video on what to do in this situation?

[@rubennovelli2320]

Hey do you find a solution for that,? I have the same situation

[@joebloem9398]

Great videos Kasey. I have a model 60 that is about 23 years old. I am only sucking brine on one of the regeneration cycles. I have pulled head and cleaned and checked everything per your videos and still same. Any ideas ?

[@dalethornton1113]

I would like to know about the metering disk and how to change the disk if we believe we need more frequent regeneration. Thanks for you willingness to pass on knowledge.

[@thegreat7429]

Thanks for video! Mine unit doesn’t get higher flow in backwash and have been getting salty water???

[@ronmeadows8754]

I would like to find where the drain is from on the unit. What the different parts are called.

[@xokissmekatexo]

@kaseysirak very helpful video! Question for you. We are moving and I want to take my Kinetco with me. Do I backwash it? What are your thoughts? Thanks!

[@marceberle2116]

We have a Kinetico unit two tank that as of two days ago, was stuck on high flow two from the drain to the sink. If you could give me a hint on what to look for or or what to check or what article to clean out that would be wonderful. Thank you.

[@john-sw1nu]

Do you know.. when doing a manual re-gen turning the gear to the Brine-rinse position, after the re-gen the catch tab is the idle window between backwash and brine rinse. As water passes thru the system should catch tab be moving thru the idle window or does it just stay at the beginning until the next re-gen cycle starts? thanks!

[@markw96789]

Hello there My friend who lives in Las Vegas has a Kinetico water softener system. It does not appear to have that pre filter attached. She has told me that the salt portion is not working. I have watched your other videos. My question is does one ever have to change the resin beads in the system and if so is that difficult to do.. I saw a episode of This Old House where they emptied the resin tank and changed the the resin beans along with some other parts like a plastic strainer/Filter on the bottom of the pipe in the resin tank. I am going to visit her next week and she has asked me to help her diagnose her problems. I found your other 2 videos very helpful Please advise me if possible. Mark

[@DP-og2oq]

Thanks for your videos. Very helpful in understanding how to check these units. My unit seems to get stuck during regeneration (not always) and runs for hours until I force it into backwash. I’m not sure what to look for that might be causing this. Unit is two years old .. 2040S OD model. Any ideas about this?

[@adamUDavies]

Very well explained video 👍

[@KandTJohnson]

Kasey, thanks so much for your instructive videos. Could you help me with an issue that doesn't seem to have a video? My water softener is cycling way too much and consuming a lot of water and salt. I was slow to realize this, but our last quarter's water bill was way up, and I can now see that it's been eating salt at too high of a rate (ran through three 50 lb bags in a few days). I followed your trouble shooting video precisely and can confirm that the control dial is rotating (seeing the little pawl click), that both sides of the cycle draw the vacuum on the brine tank at the right time, and have the same audibles and drain-line flows that you show in the video. I have a model 2030s. Any advice on what to try next?

[@kaseysirak]

Sounds like the level 1 is bad, Put the unit very close to a regeneration and just wait without using any water in the home. If it cycles through to the next regeneration unfortunately the whole level 1 is bad and needs replaced.

[@billfields7740]

Hi Kasey, Thank you for your video. It has been helpful. My problem is I am cycling too often. Two times within a 12 hour period we don’t use that much water so I’m just wondering what’s going on. Thank you.

[@Thedawgdollars1]

Yes, please add another video explaining about the suction part that you put your finger on to check for suction. I want to know what it means if you don't have suction. Thanks.

[@kaseysirak]

I will try to make a video on the unit not pulling brine in the near future. Thanks for the watching!

[@bigces87]

QUESTION: First off, thank you for the video! Our softener is the same product line. However, ours recently started buzzing and won’t stop. We also noticed, salty foamy water at random times during the week. What are your thoughts?

[@JeffNissley]

very helpful video. i wasn't getting vacuum and it wasn't any of the areas you covered, i actually had a small plug of pvc shaving in one of the rubber tubes/orfices that wasn't mentioned in the video. However, your video gave me the confidence to tear into the meter head and find the problem. Thank you

[@kennethweber8480]

Great video. I have a model 1060 dechlorinator and model 2040S softeners (2 small tanks). 1) Groundwater is tubed into the out-arrowed flange of the DCL and the DCL output is tubed to the inlet-arrowed flange. Does this matter? 2) Also my filter is tubed to the DCL outlet which is between the DCL and the softener. Does this make sense? Thought the filter should be before the DCL inlet to keep residue out of the DCL.

[@kaseysirak]

Hey Ken, The arrows on the head of the units don't necessarily have to line up with the pipework assuming you have a Mach bypass valve they can correct the inlet and outlet with it. And as for the filter being attached to the 1060 that is okay, It really depends from dealer to dealer on where the prefilter goes. I have mine before the softener just in case any fine particles of carbon get kicked up from my dechlorinator.

[@kennethweber8480]

@@kaseysirak Thanks for getting back to me so fast Kasey!

[@peacheswhatley]

Awesome video! Do you know why I would be getting short burst (10-20 seconds) of salt water throughout the house? When brushing my teeth or taking a shower I will sometimes taste these burst of salt and then it goes away.

[@davidkovar9717]

Thank you sir for an excellent informative video.

[@flockingferalhomestead]

Once you go through all the checks and everything seems fine. Where do you set the top thing to? One of the spaces between the backwash and brine rinse?

[@ohjay73]

hi Kasey.. great video.. I'm stuck at step 1 though.. what do i do if i dont see the meter paw engage? i get vacuum but it doesn't appear to be metering. Also whats the difference between the 2 in service locations? 1 is crossed the other shows the pipes going straight.

[@markw96789]

Hi again. My friend in Las Vegas actually has a Kinetico 4040s OD system. I messaged you earlier today. Hoping you can give me advice and or directions on fixing her system that is not working or using the salt brine Thank you in advance

[@joemartinez2102]

Thank you for these Kinetico exploration videos! If my salt tank is completely empty & keeps filling to about halfway mark with water where the salt should be, what should I do? I keep emptying the water & refilling with water softener pallets but it quickly goes through the pallets & fills again with the water. The bottom of the tank has a lot of salt settiment & what looks like almost rust. Not sure what to do, my landlord is refusing to come look at it or even help me with what to do. I appreciate the help & your videos!

[@ArthurPierce-i8x]

Perfect!!!!! Thank you

[@graceaguilar6749]

how much water should be in the brine tank, and what to do if there is too much? Thanks for the videos.

[@RakanSmadi]

Very informative! Thank you for taking the time to make these helpful videos! Mine is Mach 2060s model and seems to randomly get stuck in endless dripping, and the only way to stop it is forcing a manual wash cycle, until it does it again! My other problem is that actuator on top is made out of plastic and mine is damaged, so it’s really challenging to rotate it now since it sorta stripped out, not sure what it takes to replace it, any thoughts?

[@kaseysirak]

Its very easy to replace if you can get the part

[@RakanSmadi]

Thanks man, do you happen what causes the dripping outside of the rinse and wash cycle?

[@4uorfourme]

Thanks for the video. While flushing the toilet or someone taking a shower, the kinetico system is giving me a loud noise and vibration. Any ideas what could cause that? Not the normal operating sounds, which causing a vibration that I can feel upstairs.

[@OpieTaylor1972]

Hey, thanks for the video series, and congrats on the fish! I did everything in the videos, no blockages, but still no vacuum. It’s an older and smaller unit. Could there be issues with the media in the tanks that would cause the issue? It may have been “mistreated” at some point, lack of salt & general maintenance neglect. Older owner in a basement downstairs.

[@TinaICXCNIKA]

I learned something new so, thank you!

[@baradavid55]

Thanks for a great video!! Solved my problem with salt sucking 🤘

[@roycope5332]

Great videos, but still have not been able to find one with my problem. My unit works great on one tank, paw on right tank, but not the other, when it switches to regeneration, with paw on left tank it does everything except filling brine tank and shutting off. I have gone through the levels, except top, checking them according to your video with no success. Any help would be greatly appreciated.

[@tinaplatt6511]

Great job

[@tghfdd7051]

I have a problem with my unit, it's constantly running, with a low flow of water I can manually run it thru as you show in your video put it in the service position but when it starts the regen it continues to have a low flow all day. I can't figure it out any suggestions would be helpful . Thank you for your videos the ones I have seen has helped but I haven't seen anything with the same symptoms I have.

[@johnandrea9010]

Thank you for the video. I have the problem of brine suction not working properly. It starts regenerating, but brine is not getting out of the tank. I hear that noise, but when I disconnect the brine tube the water gets out from the brine elbow, is not sucking air as it suppose to do. This is a 2040S-OD twin tanks, on main tank never works, on the remote tank it works once in 5 times. When it works, is happening as you show in the video with sucking the brine. I opened the Kinetico unit, added some lubricant (Dow Corning 111) on all the valves (maybe to much?), still the same. it just fixed the dripping on the drain tube, no more dripping. There are 3 valves (2xdrain and 1xcontrol) with a conic blue seal. They are not cones anymore they look strangulated. I can't find these anywhere. I'm not a specialist, I just watched whatever I found on youtube, but I can't fix it. I just want to give it a try as is in my house. Thank you.

[@kaseysirak]

Typically speaking the most common issues that cause no suction during the brine rinse stage of the back wash are a plugged Venturi or the check stems are not able to move freely. The Venturi is located in the level 3 it is a small plastic piece that is a friction fit with an o-ring. You can find it pretty easily by tearing the unit apart and just looking right where the brine elbow leads. Grab some pliers and gently pull it out and clean as needed a needle or a back of an earring should work just fine for getting any debris out. I also typically blow through the port too. As for the check stems they are located in the base of the unit. So if you take all of the levels off you should see two yellow stems sticking up. They should move freely up and down with little restriction also make sure the holes they check off into are debris free. Finally one other less common issue that can cause this is low water pressure during regeneration. Most commonly this is caused be a plugged prefilter so it wouldn’t hurt to check that out too.

[@jorgan2028]

Hi, good video, the brine tank is over filling, this is a small unit that is all in one, what would be the cause?

[@walter2990]

My unit flows discharge water from the drain line continuously. Thereby depleting the brine tank quickly. My unit has been in service for about 30 years, and I've successfully "rebuilt" the head with after market parts from a guy in England, about 6 or 7 years ago. I've also replaced the media material about the same time. Please let me know if you've posted a video about this issue. I'm running straight well water into my house now, bypassing the softner entirely. Thank you for any response!

[@johnandrea9010]

Hi Kasey, I found 2 small white plastic pieces stuck in the head unit. They couldn't come from the city pipe as I have a filter. As the unit doesn't work anyway (almost no water pressure, no regeneration) I opened the tanks and the resin burst out. The distributor tubes are snap fit and supposedly not removable but they came out easily. I found that both tanks have the distributor tubes snap-in section broken in pieces and that explain the parts found in the head unit. It's impossible to find these tubes to purchase. The snap -in section of the tube is a white plastic (PVC maybe) and the bottom of the tank is black (polypropylene or other hard plastic). Do you think is it worth to try to glue them back to the tank bottom and add new resin? I intend to use loctite plastic bonding glue which supposedly is the best on all kind of plastics. Is there any other solution to fix these tubes? Thank you!

[@codylujan]

Not a good idea to try and repair these units yourself. call kinetico and swallow the $100 service charge or you'll be spending thousands to replace it.

[@vegasguy5430]

Where do you find parts to rebuild the units. I have a model 60. I came home one day to find the water running in the drain and it didnt stop until I manually turned the dial to stop it.

[@eric_sc]

Thanks for the video...the issue I'm having is on just one side of the regeneration cycle. During both the brine and backwash the water pressure in the house goes down to almost nothing. When it finishes the regeneration, the pressure comes right back, but the water is not soft. When it's on the other side of the regeneration cycle the house does not lose pressure. All the tests you show seem to be working for both regeneration cycles. Any thoughts on what this could be?

[@shashikanbi]

Hi there I have a kentico 2020c and have noticed that only one tank out of the 2 is giving soft water and not the other, have tested both regen cycles and both are drawing brian any idea on what it could be? All lever 4 washers have been replaced and also the resin, first in of of the cycles drain was constantly running but managed to sort it out by changing the washers on the drain valve

[@750503]

Do you have video to fix salty water issue from similar Kinetico water softener?

[@gemmaperson4705]

Great video! My kentico system is running a low psi (measuring about 10), this happened after changing the filters both the yarn as well as the reverse osmosis, do you have any ideas as to what I could have done wrong? Your videos are very helpful! Thank you!

[@gregoryjowers3629]

What kind of filter do you use with Kinecto

[@carrolljenkins5650]

Hey Kasey, I have a Kinetico system with a chlorinator tank attached. The chlorinator isn't currently working. Any suggestions?

[@baileym3154]

my kinetico is not metering I did everything else in your video and it seems to be fine I get suction on the hose . the meter drive paul moves but the no back paul wont jump a notch I believe Im calling the levers correct

[@norberto8347]

Hello Kasey , i have a problem with my system it appears to be stuck on drain , and the water just pours out of the drain tube , should i do the trouble shooting? thanks

[@lucmasse8814]

I have the same problem. Did you fix it.

[@Yourmission9]

Awesome videos, I’ve watched them all and intend to do so again, please keep them coming! #kineticoowner

[@JasonSmith-mv6vq]

My unit keep pushing water out the drain. I am talking about gallons of water. Our local water softener technician says nothing is wrong with the unit. Please help.

[@craigan1]

Kasey, I have suction that is just fine, and water is coming out of the tank, but only about half-three quarter an inch. It starts out about half to three quarter inch above the plastic shelf in the bottom of the tank that hold the salt, but then it only goes down just just barely below that shelf, so only about half to three-quarter inch. Is that enough or should it be pulling more water out?

[@kaseysirak]

It all depends on the Softener/Brine tank combo. If you never adjusted the brine float I would say it is just fine.

[@petezilahy9963]

My 2nd tank. Not the one with that control device you operated. The attached 2nd one is leaking out of the top of it... Can I take that apart and maybe apply teflon tape to the threads. How do you take the head off that tank? Or do I need a new tank?

[@kaseysirak]

It is sealed via an O-ring at the base of the threads. Typically if the tank goes bad it is more of a pinhole leak

[@johnhatton2511]

I think these videos are brilliant.......but there is not one to help me find out why my 2020c tank does not refill. Brine is drawn up but tank not refilled. Can you help me please? Thanks, John

[@richardpencak6800]

Do you know where I can get a rebuild kit for my K120?

[@loridscears]

Great videos Kasey. We purchased a house with a Kinetico system already installed. I've seen no issues with it over the years until just a month ago we had the water heater replaced. Since then the water has been hard. Any connection there? I've tried the manual regeneration before I discovered your videos with no change. After watching I did test the brine port and it is getting suction. It didn't seem to be metering however.

[@loridscears]

Been monitoring it the last couple days and it definitely is not metering. When they changed the water heater, they shut the water off from the well but didn't touch the bypass. When they turned the water back on, water was pouring from around the pre-filter. I had to go around and make sure everything was shut off, but then when that was under control and we turned it back to "service" the system was just draining water. I just went around and made sure all the air was out of the lines and that ended up resolving that issue. But then after several days we realized the water was not softened.

[@sandrablackwell6230]

Hi 👋 I have completely bypass my unit. I am wondering if you have seen an issue where there is hardly any water pressure in the entire home. There is a pencil thin stream of water when the softener is on.

[@kaseysirak]

Could be the pre-filter needs changed or the resin bed if fouled. Id check your prefilter first if it hasn't been changed in a while.

[@lynnburton4818]

After regeneration and it goes to in service water keeps running out drain tube does not shut off, had service technicians out three time and repair last only 3 or 4 months?

[@MrGoose12321]

What if during one of the backwash cycles, half way through I loose water pressure and the meter disc slows down until it cycles through. I also loose house pressure until the cycle completes. Everything else is working properly

[@LieDetectorMusic]

No water pressure and can't get the filter off. Any help would be appreciated.

[@崔扬-p1l]

In your video, you said that you will make a next video about the reasons why salt water is not sucked, or why the salt tube has no suction. I can't find it. Can you answer it? I'm from China and almost no one here knows how to repair.

[@ninalafferty8157]

Our system is regenerating but not shutting off automatically. Any suggestions?

[@gary4738]

My Kinetico K-60 Filter system pulls brine, backwashes properly but still continues to drain constantly. Any help is greatly appreciated! Gary

[@cathypowell7870]

My Kinectico is going through a bag of salt a day, could you please advise?

[@ashleyheaney6326]

Mine is also using way to much salt. I add 3 bags of salt in a weekend. By the following weekend it is completely empty of salt and only has water in the salt tank. Did you figure out what is wrong with yours?

[@berniemcdonald9243]

Can I disassemble the backwash/ brine assembly? Unable to see settings. Has dirty water inside. Thanks!

[@kaseysirak]

I will try to make a video on how to disassemble the cap area in the near future.

[@nshenwari]

Great video my one just turned over one year and have problem water continuously running No I put my unit on bypass is there any solution greatly appreciate

[@Texacate]

Like many others in this thread, my Kinetico gets stuck, and water continues to go drain line. A video on that would be awesome. Even its it just: "Call you're dealer" because it's too complex to DIY." Sad thing is mine started doing this after the dealer "rebuilt" the head. I was able to get it to kick over to the next part of the cycle by shutting off the water to the unit, it kicked over (salt line jumped), then I'd turned the water on again. But 6 months later this trick doesn't work anymore.

[@grumpyoldphart7325]

I have an older Kinetico model 2030S that is causing low water pressure in the house. Is it worth having it rebuilt?

[@kaseysirak]

Sounds like it needs a rebed. If everything else mechanically works it would be worth a rebed

[@grumpyoldphart7325]

@@kaseysirak Thaji you for the feedback. The tech came out today and said it needs to be rebuilt at a hefty $1500 price tag. I would do it but they do not provide a warranty beyond a year.

[@jannievargas2750]

My water softener has a hose that is connected to a pvc drain and it has been leaking today, I did all the steps you instructed in the video but it still keeps leaking. Is there anything else I should try?

[@esond]

Thanks man.

[@johnamer8495]

I am getting a charcoal looking color in my salt reservoir where I add the salt. What do I need to do to fix this?

[@matthewgarner8728]

I changed my filter bout a month ago, and when I went to put more salt in the brine tank had no water?

[@lf6156]

Thanks for your video, I tested the metering section of your video and mine is not metering what could be the issue thanks

[@kaseysirak]

Typically speaking if the unit is not metering there are two main causes. Either the Meter drive pawl under the cap area is not engaging with the meter disc. This is usually caused by a cracked pawl or a weak or broken spring. The other common cause is in the meter gear stack. I have found debris in the meter gear stack causing it to not be able to move freely. Those would be my go to places to check.

[@maquinas2000]

Thank's a lot for that. Nice catch with the Pike :o)

[@salaguirreful]

My system wont stop running... the kinetico guys came and told me it was because I had high pressure. ended up paying $850 for a plumber to come install a pressure valve and still have the same problem. the thing wont stop making noise. any idea on what this might be?

[@realtorinsights-c2x]

Thank you

[@GordonDanner]

No salt useage. Have had the head apart 3 times per your instruntions. Still cant get suction.Gaskets look good.

[@charlesfrhodes730]

How about using a camera that can be focused for close-up. Also, the camera is not being held steady as there is motion which makes it difficult to follow.

[@spiketaterman5181]

Had a service guy replace the level 0 of head, now unit doesn't seem to regenerate. What could the issue be?

[@alexmarcinko6084]

Have you ever had issues with your water tasting like salt? If so how can i correct the problem?

[@onlyshiva]

I did clean the salt tank and poured some water back and added salt one bag. In three days the whole salt one bag is gone. Is it regenerating multiple times? What may be the issue. Please help

[@richardpencak6800]

I'm having trouble turning the control disk. I push down and turn clockwise but the disk won't turn. I can continue to turn the screwdriver but the piece in the cap area stops turning and the screwdriver keeps moving. Can you help?

[@kaseysirak]

There may be a broken pawl in the cap area or an obstruction in the meter gearing on the level 1. It can also happen if you put the cap area pawls in the wrong postions.

[@richardpencak6800]

@@kaseysirak I will take it apart soon and inspect. Your video on taking the head unit apart was great. What number disk should I use if I have a hardness of 28 and no iron?