How to Tune Q's Adjustable Gas Block

[@johnniehowell7128]

I saw this about a year ago and watched again today because I brought my Honey Badger SD home today… finally! Thank you for the informative video, I’ll be tuning my HBSD accordingly tomorrow. I always enjoy your content brother.

[@TMJ937]

How do you like it so far all things considered? Got one on the way..

[@k2blah-blah-blahski]

Thank you for this video. I just picked up a 300 Sugar Weasel pistol. Went to shoot it for the first time (no suppressor, yet). It did not cycle, had to rack it after each shot. It did that with supers and subs. I'm hoping that opening the gas block fixes it. I had no idea how to do it until your video, thanks.

[@jasoninglehart3923]

Those guns seem so exotic compared to everything else. Nice job explaining it as well as your older Superlative video.

[@iceblock3]

Great in depth video and showing the turns and the jam nut explaining that more

[@craigfisher146]

Exactly what I needed. Just built my 300 mock Sugar Weasel since I can't get my hands on the whole rifle. But at least I got the barrel and handguard! But realized I didn't know how to work the gas block. Duh. Proud to have you as one our members at the club. Your content is always amazing. Maybe I'll run into you one of these days.

[@mildest.survivalist]

Thank you so much! My HB SD was ejecting to 5 o’ clock out of the box, (and after 348 atf days of Christmas) thanks for getting me close to 3 quite easily.

[@CPRSquared]

I appreciated this for dialing in my Sugar Weasel and Honey Badger.

[@Antykain]

Nice! Looking forward to getting one of those Q triggers also..

[@findalefinnie]

Same!

[@mr.b3132]

It's crazy cuz it's about as much as a cheap AR...

[@eltonjcasarez2744]

Thanks for dropping some knowledge on use . God's speed my fellow Patriots.

[@mr.b3132]

Indeed, you too bud...

[@KwekuDorbaGH]

What I needed after a frustrating range day with my sugar weasel with a ventum 7.62 suppressor not cycling subs well.

[@CRAZEDX100]

Flow-through cans aren't a great choice for subsonic ammunition

[@Lerorydagoat12]

Yeah that may never work lol

[@F5NBlackNWhite]

The ole Kit Badger. Great and informative videos! Thank you.

[@possiblemarten]

the snow was a great backdrop for this video. nice work, and relaxing video.

[@wallstbull1]

Perfect lesson for getting these bad boys set right. Have a Honey Badger SBR with a Trash Panda and shoot mostly subs. This was hugely helpful. Thanks and cheers 🍻

[@coachtx]

Thank you Ivan! I've been needing to adjust my Sugar Weasel- just haven't been to the range much lately.... Also, how in the world did this get a down vote??

[@TheColdstuff]

Great video. I read the instructions in the box of my Honey Badger 3 times and was still confused. This made is super clear. Once my Thunder Chicken gets out of ATF jail I will definitely follow this procedure as I plan on shooing mostly subsonic once I can put my hands on it. I can understand why you don't want to over gas the gun, but I do wish you had talked a little about the symptoms of too much gas so people would know when to turn the Allen screw the other way.

[@christopherholt784]

great video, i will need to do this for mine once my full nelson gets here. nice trigger by the way.

[@juanh.8707]

Great info K-B…just grabbed an SD not too long ago.

[@brandonmellor4439]

Great video for someone like me with a HB and a thunder chicken in atf jail . Thanks

[@mikeodell5915]

Thank you. I just got my honey badger

[@danielh2009]

Great video as always

[@taylorbookout506]

Thank you! Was looking for a video going over this. Love the videos!

[@Namesi]

That whole setup is just pure sexy.

[@dphil2703]

That trigger is 🔥🔥

[@niivlac]

LOVE THIS!!!

[@davedave2941]

Want to say if you never did your deep dive on this wpn - would never had purchased 🤙🏼

[@AA-yx2kf]

That's my dream gun!

[@H.Green83]

Can’t wait to get a HB! Got promoted to the point I can afford one and its in the middle of gun/ammo Armageddon and they have up to a year lead time with $1000 price increase 🤦🏼‍♂️

[@F5NBlackNWhite]

I backordered one as well. I couldn't be more excited. I already have a Trash Panda, but will order a Thunder Chicken when they are available.

[@H.Green83]

@@F5NBlackNWhite I lucked out my local shop had a thunder chicken that I put in jail last month.

[@F5NBlackNWhite]

@@H.Green83 sweet! Better to have it in jail now than to be waiting to buy one, just to put in jail. I've ordered most of my silencers through SS. My local shop carries more Sig suppressors than anything.

[@chatnasty]

Hunter Green, I'd recommend following Q on Instagram. They share locations of the HB in their Story.

[@fwod1867]

Great video. Thank's

[@angeladelarosa3646]

thanks for the great explanation! super useful!!

[@illestdomer2005]

Great video but just goes to show how not all AGBs are created equal. Ease of adjustment is important if you’re running subs and supers.

[@garyjones7370]

Thanks

[@Unionco56]

Super helpful as always!

[@MYDOGBUD]

Riflespeed dial gas is far superior to any adjustable gas block out there..a game changer to those that run different loads.

[@derekddurbin]

I really like your videos especially the music. I have a HoneyBadgerSD and I run an Aimpoint on it because the gun is so light I don’t want to really put an Eotech that almost adds a full pound to it. However my eyes are getting worse my astigmatism is starting to make all of my Aimpoints look like red christmas trees lol. Does anyone know if Eotechs are easier to shoot if you have an astigmatism? I know it’s a weird question I appreciate any advice. Thanks guys, great informative video as always Ivan.

[@johnnyshanksalot8358]

Sounds like you need a 1x micro prism imo.

[@jeremiahleak9371]

Great video! I am curious about the honey badger SD rail. Looks like you can't put a light or anything in the mlok slots by the suppressor, is the extended rail actually useful?

[@chatnasty]

It has minimal utility from what I can tell. Best I can come up with is that it offers and extended sight radius with irons and it looks cool.

[@coachtx]

You are correct, the set up will minimize M=Lock usage. The point of the extended rail is simply because the can gets so hot during use. I've also suspect its friendlier for people who are used to 16" barrels

[@ryanpeck3377]

Its mainly so you can reach further out and not have to be all scrunched up on a tiny piece of rail. Also gives you spot to rest it on a barrier without a ton of suppressor hanging out over it or having to rest in the suppressor.

[@mr.b3132]

It's a big knock on the SD..most of the rail you can't use

[@BillMacKrell703]

how would you adjust if you were getting failure to feeds?

[@joseherrera4339]

What’s your method on attaching your sling to the Q Hand guard?

[@davedave2941]

I use 550 cord

[@user-ms3lw3gi4f]

How many times did you misplace those Allen's?

[@RayDCO]

Ivan doesn’t drop tools or parts. He’s like a field surgeon

[@Zevich646]

Do you ever have trouble with the rifle being over-gassed for supers even though it's tuned well for subs? My supers get launched when I shoot them (tuned for subs)

[@illestdomer2005]

Yep, that will be a forever problem. These Allen key AGBs are an improvement but not as good as a Riflespeed, for example.

[@FarmerJimbob]

Is it smart to tune to subs and then shoot 110 vmax? I've heard it can spin the bullets apart with over rotation in a 1:5 7 inch barrel like the sugar weasel or honey badger

[@maximusprimus827]

Isn’t the HB tuned for both subs and supers from the factory?

[@theairsoftdudes2108]

What if your suppressor is pin and welded how do you remove the hand guard I just bought one and am in the waiting process but for the state of MD the suppressor had to be pin and welded

[@Stickman550]

5:04 TaunTaun. They're called TaunTauns.

[@FlacomanXD]

Don't you have a fear of the two set screws on the block walking out? Or do they counter eachother so the don't move?

[@thatfreeamericantv923]

they bind up literally impossible for them to backout

[@EzBakeDubbin]

Will a seekins lo profile gas block fit in the Handguard ? I want the look of the Handguard and supressor but I have a 9” faxon barrel and a sandman s

[@TheMr409savage]

What rail wrap and foregrip is that? I currently have a burn proof gear rail wrap. But I am not impressed with its performance because it is held on by elastic bands, which stretch overtime.

[@iansander1997]

Is it possible that cheaper subsonic ammo may never fully cycle? I was using S&B subs and backed the adjustment nut out so far that it was almost out of its threads.

[@3darms]

need a suppressor

[@pd5156]

Im not sure if You are sponsored byt these rifle companies, but if You want go so short with ar15 platform try PWS...

[@sachhiemdotus]

Are those small alen keys included?

[@mebbett70]

Yes. They come in a baggie with the firearm.

[@blackops2096]

Please tell me what rail wrap that is.

[@scott4793]

He probably states it at 1:58

[@wesjohnston8286]

Like 3rd by now

[@BLOWNChevySS]

Servicing q trash panda 0:45

[@johnnypop-tart335]

i honestly don't touch mine. Q makes the gas prefect put of the box.

[@fabiosupreme7419]

Anyone know of any videos of how to remove the original traditional milspec style ejector cover ( not the strike industries polymer one)?

[@maxsherro8729]

How do you take the barrel off?