HOW TO TURBO YOUR 2H DIESEL - 60 LAND CRUISER BUILD - FIRST START - PART 4

[@mosesodell2930]

Wish you could come to Uganda and build it on my old HJ60 diesel...just for fun...

[@niijesusv9485]

Where do you get the water lines for the turbo?

[@lindsaythomas2395]

Do you have picys of the second compressor setup attached to the the aircon compressor. Can you do a video on it perhaps. I have a endless air compressor, just scratching my head how to go about it. I have a 2H HJ75 ute, your set up would be identical to what I need to do to get it to fit:) Your set up looks amazing. Keep the videos coming, your doing great:) Thank-you for taking the time to make your videos.

[@vememakangunde4734]

Great job! do you just install the turbo without changing pistons and con rods on the 2H?

[@harrisoncastrikum29]

Whats keeping the gate closed?

[@jute91]

If your turbo can handle 1,5bars without overspinning, try that ;) 2H head gasket can handle that easily. Some of our offroad friends ran around 2bars, but they do only short pulls in the offroad

[@jute91]

It's fun to watch your videos :) I'm middle of turbocharging my hj60 so this will come in good use. I'm going to use old valmet turbo first ( kinda budject build) wanted to see how it pulls, since it's from 4,4litre 4-cylinder tractor. I'm going to make exhaust manifold myself, since in here Finland we have left hand drive so the brake master cylinder takes a bit of space from the exhaust. Have to make it front mount manifold

[@boostedbuiltgarage]

Juuso's Garage Thanks man, glad you enjoy☺ that turbo should work fine I reckon! Good luck with it buddy!

[@jute91]

Check out my facebook page Juuso's Garage to see what I'm building :)

[@boostedbuiltgarage]

Juuso's Garage Will do!

[@ruben8438]

do you have two air conditioning compressors ??

[@boostedbuiltgarage]

Yes, one has been converted to an air compressor

[@connorengland4671]

You need more fuel for more boost.

[@balmoresegovia8853]

Every time you drill metal in a oil pan you supposed to take out to be clean out

[@corollagl82]

How do you enrich the fuel?

[@boostedbuiltgarage]

+corollagl82 The fuel screw on the back of the diesel pump

[@corollagl82]

Boosted & Built Garage thanks for the reply how does the said screw enrich fuel at boost?

[@boostedbuiltgarage]

+corollagl82 On the 2h I don't think it's purely on boost, I think it's across the whole board. Don't quote me on that. I honestly don't know enough about tuning diesels. Petrol motors is where my expertise is lol

[@corollagl82]

Boosted & Built Garage nice, first time i saw your video, i fell in love with your work. How is the wastegate triggered?

[@driftkid_boizpower_slide5087]

What size exaust in it

[@boostedbuiltgarage]

+Driftkid_boiz Power_slide 50 3" straight pipe with 3" cutout after dump

[@coreoftheappleisle8950]

Hi guys ,How did the final result of the turbo turn out ? I've just install a turbo kit on my 2h I'm worried about over boosting it's , what would you say a safe amount of boost is , I'm just looking for a bit more power for towing over the hill but long Jeopardy is important, what's your guys thoughts about this, thanks

[@boostedbuiltgarage]

Mate the more boost the better. Diesels need boost to cool the combustion temps. I would run as much as your turbo size will allow. Usually 18-20psi for most standardish turbos.

[@coreoftheappleisle8950]

@@boostedbuiltgarage ok thanks for getting back to me mate 👍

[@williamfitzallen8713]

The turbos to big

[@balmoresegovia8853]

Metal pieces will destroy the motor

[@chriswilkins2643]

don't push the clutch pedal in twice to change gears... It a car not a truck ,,,,I know you don't like to hear that

[@1993Revhead]

Turbos way to small for a 4.0l. Should of used a xr6t turbo

[@brycebullman2270]

It’s a diesel mate, a gt35 is going to be way to big