Рет қаралды 218
This is a stencil for a 6 metre labyrinth, printed on ordinary A4 photocopy paper from a pdf of a black and white graphic. The pdf printing interface is very good... us Poster print, scale by percentage to suit (a bit of trial and error there, though it does tell you the size of the finished tiled printout). my graphic was a4, scaled up 2000 percent. it told me it would use 262 a4 sheets.. including blanks surrounding the graphic. I printed it on my little Brother laser, using toner save mode. also saves toner to turn the graphic layer density down to around 33 percent so it's light grey.
Check the Cut marks option in print menu, and sheets Portrait. then guillotine the printed stack on the left long edge and the bottom short edge. this leaves an overlap to glue with a bead of pva glue lining up the sheets with the cut marks.. ample bead of glue gives some slide time ..adjustment to the cut marks.
I glued the rows together left to right, then the resulting strips I glued to each other downwards.
cutting out was very quick with a sharp boxcutter.
The circle of feltlike extra thick weedmatting I also cut with boxcutter.
stencil can be used with spray and enamel or thinned acrylic sprayed on with an air spray gun.