SEE NEW VIDEO HERE: • How to unclip vents in... This model is specifically the MSZ-HM09NA
Пікірлер: 43
@swampe_rat21 күн бұрын
Thank you for the tip! Was wondering why I was struggle with something so simple… Knew there was a tip out like this prevent us all from breaking the dang tabs! Appreciate the post!
@TheHatt Жыл бұрын
Thank you so much! All other videos make it look easy, "just grab the tabs and pull". I struggled for ages until I found your clip, much appreciated!
@Elainereaganart Жыл бұрын
Thank you so much for this video. I have tried and tried to clean in that area several times when cleaning the filters but couldn’t get back in there. I cleaned today and my husband was getting ready to take the whole unit apart until I found this video. Was able to pull the vents out and clean out the nastiness (we bought the house four years ago and I don’t think anyone had cleaned them since they were new). Now I can breathe without worrying about getting lung cancer - LOL.
@dburke1 Жыл бұрын
I found other videos on cleaning these but none of them explained this step. Huge help! Thank you kind sir!
@nemoexnuqual3643 Жыл бұрын
Dude! THANK YOU!
@w.b.howard58882 ай бұрын
OMFG! this drive me nuts!!!! you didn't mention to push in with the screwdriver on the bottom of that channel while pulling hahahaha I thought I was going to break the dang thing lol ex aircraft mechanic here, plastic is my worst fragile enemy. Thanks for the guidance in the right direction!
@metaphorge Жыл бұрын
I had such a hard time doing this, even with your video. Ended up being able to fit a swiffer duster in between the games! I appreciate you taking the time to make this though!
@edl2177 Жыл бұрын
thanks for sharing! found out that using hair dryer to heat up the plastic can soften the clip
@kentom13 жыл бұрын
Holy crap, I spent a good half hour trying to get it open up, but finally gave up. Thanks for making this video!!
@robbiestevens5511 Жыл бұрын
Thank you!!! I also have been searching videos, and they all made it look so simple to open.
@TesSunnyy5 ай бұрын
Thank you so much for sharing this! I finally got mine open after struggling for a while lol
@shannonlamb70483 жыл бұрын
Thank you so much! I was struggling with this and thought I was going crazy!
@sarahfoxphotography2 жыл бұрын
Thank you so much! I didn't even know the grill opened up until I saw your video.
@DinoMedic911 Жыл бұрын
Thanks so much for the trick in getting those open. I had exactly the same experience with other videos and was concerned about breaking something if I pulled too hard.
@maheradous92573 ай бұрын
Good job 👍
@firesoul4533 жыл бұрын
Thank you. Best video on this.
@3rDegreeBernz Жыл бұрын
Dude THANK YOU this was driving me insane
@jay1522772 жыл бұрын
Big thank you for this video!!! Much appreciated!
@tdif31973 жыл бұрын
God, I finally got mine. It was so unbelievably tight, I had to use pliers to grab the tab because my fingers couldn't get inside, and by the time I got it open, the little nub had been basically obliterated by the screwdriver. Absolutely disgraceful design on these things.
@sherryberry2394Ай бұрын
Indeed, it is a very aggravating design. 😩
@ced532 жыл бұрын
I have to laugh. The video is a little crazy going into and out of the target. But you saved my afternoon! Great job!!
@joneclegg2 жыл бұрын
Thanks! Yeah, it was pretty hard to do while holding my phone with one hand, glad it worked for you!
@paullisanti4727 Жыл бұрын
Found this really really hard. Somehow my wife figured it out as this video missed how to do it as the camera shot missed it.
@terryjackson3762 Жыл бұрын
Thank you so much!! I had given up and was using coil cleaner from the top.
@flopdizzlinator2 жыл бұрын
I fix things for a living and could not figure this one out lol. Thanks!
@nwsparksnmore Жыл бұрын
Thank you!!
@sharonsybrandt44552 жыл бұрын
I'm going to see if I can do it just by the narrative, but it would have been better if we could see what you were doing. I understand you were filming and working at the same time. At the very least, I now know that they actually DO open up. I don't know how else I would have cleaned behind that nastiness!
@sherryberry2394Ай бұрын
I'm a firm believer in pulling out the blower wheel for cleaning, but this is one of the aggravating steps in doing so. I've used this exact procedure a number of times and it usually works, but one of the vanes this time absolutely will slide open. The plastic is getting damaged by the insertion of the screwdriver over time. I'm to the point of taking a Dremel and cutting the tab off, just zip tie to keep closed thereafter. Has anybody tried such a modification? (I do love my minisplit though-- kind of a love-hate relationship because of the cleaning.)
@kingnas7752 жыл бұрын
Thank you so much!!!
@Catherine-dj5tb2 жыл бұрын
Still trying to get mine open. I couldn't see exactly how you did it - Would love to see another video! So afraid I'll break it!
@joneclegg Жыл бұрын
I made another one, please check it out!
@Alohajim883 жыл бұрын
Thanks very much!!! Saw the other video and the tabs holding the clips must have been cut or not there. I did not want to cut these but thought no way this is coming out if I don't. Lots of time wasted and looking for video 's that explained this. Thank you again Jon for making this video!!!
@leighscudder3952 жыл бұрын
God this is a nightmare. Still can't get it. Any reason you can't cut the little u shaped plastic part you have to slip the screwdriver over? Seems like it could still clip in firmly without it.
@joneclegg2 жыл бұрын
Yeah, it's a huge pain! I don't know if that would work, make sure you tug it pretty good, it still not easy after putting the screwdriver there.
@andrewadham30795 ай бұрын
That's great, but we could not see exactly how to do it.
@taylorrosew16 күн бұрын
You literally didn’t film the one part that mattered
@danielbarry45632 ай бұрын
Thank you for doing this video. Mitsubishi sucks!
@darkokovacevic55362 жыл бұрын
Im not seen enithing
@SingularlyNaked Жыл бұрын
My god man, is there nobody in the house who could hold the camera? Do you have no friends? Doing the thing OFF-CAMERA is not particularly helpful.
@joneclegg Жыл бұрын
You what they say about good deeds, they never go unpunished. Go make your own video
@SingularlyNaked Жыл бұрын
Might do, might do.
@joneclegg Жыл бұрын
i recorded this a month ago, but didn't get around to editing it until your post, so squeaky wheel gets the grease kzbin.info/www/bejne/f2mpmXijrs2Ngpo
@SingularlyNaked Жыл бұрын
@@joneclegg There ya go! Clear and visible! Thank you!